Re: Poly G7500 Serial control
|
Thanks for that info¡ Seems like I haven¡¯t been missing much
?
?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of
Phil Bridges
Sent: Wednesday, January 18, 2023 10:28 AM
To: [email protected]
Subject: Re: [crestron] Poly G7500 Serial control
?
... and good luck with the G7500.? I have been less than impressed with them, though they are slightly better than they were a year and a half ago.? Also note that if they don't see a camera via HDCI at codec boot, you will only ever see
a blue screen for your camera image.?
?
The 4.0.0 is what I am using via serial, but I've had to do some offboard processing as well to cover deficiencies in the module.
?
On Wed, Jan 18, 2023 at 10:15 AM Lincoln King-Cliby via <lincoln=[email protected]> wrote:
I guess I¡¯ve been spoiled in only dealing with Cisco/WebEx hardware codecs for the past 5 or 6 years and kind of forgot Poly(com) existed.
?
I¡¯m building out the scope for a project that includes my first Poly G7500 codec. The consultant¡¯s drawings show RS232 control (it appears that the VTC network may be air-gapped
from other networks in the building). Spec intention is point to point IP calling (no Teams, etc.)
?
Is there something existing that I can/should use (is 232 the API the same as the last generation Codecs)?
?
There¡¯s a v4.0.0 posted on the application market but it from the help file it¡¯s not clear that it supports RS232 (there¡¯s a communication mode parameter but ¡°serial¡±, ¡°232¡± and
¡°baud¡± aren¡¯t found in a help file)
?
it appears to be SSH only and I¡¯m a bit concerned by the note ¡°An updated version of
this module will be published shortly¡± but it was last updated 2+ years ago
|
