I had a dmp64 recently. To get it to work i did the following:
?
The first string the dmp sends after connection ends with ¡°password:¡±
Then you have to send the password.
Then you get a reply that you have logged in as administrator or user.
Then you can start sending the verbose mode and strings (e.g. ¡°I¡±) to keep the connection open. In my case the connection dropped after one minute and I haven¡¯t changed this in the settings.
@Andy, I know the password for the device.? That's not the issue.? The issue is the password is preventing the VC-4 from communicating with the DMP (At least that's my theory).?
?
I'm fairly new to the game, and still don't know all the tricks.? Is there a way to set the processor to remember passwords of various devices?? Also, I'm using a VC-4, running SIMPL program.? It's my 1st time programming a VC-4.
?
?
?
On Sun, Oct 23, 2022, 5:09 AM Andy Smith <asmith@...> wrote:
Password needs to be set on all extron devices now, it is the serial number of the unit
On 22 Oct 2022, at 21:05, Scott via <smschreiner10=[email protected]> wrote:
?
23. And I've followed instructions posted in previous discussions.? I've got an oscillator pulsing verbose 3 every 30 seconds.? I don't know if that's necessary.? The posts were from 2018, so could be outdated info.??
?
On Sat, Oct 22, 2022, 12:57 PM Audvizer <Audvizer@...> wrote:
