Has anything funky happened recently with QS.
I have a Lutron program that was originally written back in March 2021 in Lutron Designer 15.8.1?and the simpl program was written at the same time.
Tested and all working back then.
I've taken the same Lutron program and loaded that to a new LQP6-2 (modified in Lutron Designer 15.10.1 today to add a secondary processor and some 3rd party HVAC)
The same simpl program, only modified with the IP address of the new QS processor loaded to one of our test CP3's.
All devices are pingable on the network but the Lutron cannot be pinged from the CP3.
Now I'm pretty sure back in the bad ol' days a Lutron License was required for the processor and then Lutron was pingable but I'm sure that no longer applies.
It simply will not connect, telnet login details are the same. Only thing that is different are the IP addresses but as stated these have been updated in the relevant programs.
The system is not connected to the internet and was not when first set up. I'm loosing a lot of hair over this with a lot of head scratching (and I did not have much to begin with)
Lutron IP client connect status just rolls round 1,3 as it attempts to connect.
