Hello all !!
I am currently working on a conference room that has a 3x3 video wall as well as 5 displays around the rest of the room.? The client is wanting to be able to split up said conference room into 3 rooms or any combination of the 3.? I have a Biamp tesiraforte handling the audio control coming from 3 nvx 350's in encoder mode and attached to floor box inputs(audio and video) and a Shure wireless mic setup. I also have 3 tsw-1060's...one per "area". Room 1 will control all displays and audio zones, unless room 2 or 3 is active then it would only control the "front" which included the video wall and one additional display.
I'm having an issue where I am not sure how to setup the combine/separate on the NVX decoders.? I have been around the residential game for a long time and have never had to do something like this before.? Would I use a Multiple Serial Send to send out the rtsp stream to each decoder or run through a CCROSS to ECROSS ? I'm at a standstill ATM on this.? Everything is working through the web GUI as far as audio and video streaming on video wall and ancillary displays, just now working on the touch panel logic and it would seem that I am just drawing a blank on this.
Any pointers in the right direction would be much appreciated.
BK
