¿ªÔÆÌåÓýWhoops sorry, yes, here goes.? ? On one of the instances, the original configuration gave feedback as to the state of 3rd party lighting controls.? After the re-compile, the controls still worked but the feedback would experience random changes (feedback would react as expected when the lighting circuits were first changed but then after a few seconds, the feedback would change to an off indication (the lighting wasn¡¯t off, just the feedback, digital signals). ? On the second instance, the original configuration gave feedback on the tank levels from an RV.? With this scenario, after the re-compile, the feedback would read correctly for a while and then read random values for a few seconds and then change back (analog signals). ? But, if I went back and installed the older version of the program, everything would work exactly as expected on both systems.? ? I hope this makes sense. ? Thanks, DAVE ? From: [email protected] <[email protected]> On Behalf Of Thorsten K?hler
Sent: Wednesday, June 16, 2021 1:29 AM To: [email protected] Subject: Re: [crestron] Modules exhibit weird behavior after recompile ? Hi, it would help if you could describe the ¡°unpredictable behaviour¡± a bit more in detail. ? ? Cheers, Thorsten ? Von: [email protected] <[email protected]> Im Auftrag von F David A Coker ? Hey Crew, I have a weird scenario that I have been experiencing on a couple of my jobs.? I have an existing program on a CP3N that works just fine.? I recompile it with the latest databases etc. and now it exhibits unpredictable behavior.? This has happened twice in the last week.? Does anyone have any suggestions?? By the way, the program has not changed at all, just a recompile with the latest files.? Oh and the module was a S+ module on both scenarios. |