Hi Need help,
I had recently downloaded the Bosch DCN RS232 module from application market, the zip version can be downloaded here
Or
in the help file it said this module only work for series 2 processor, and yes it was previously worked on Crestron Rack2 by other system integrator.
however for this round this project, i need to decommission the Rack2 with new CP3 series 3 processor.?
when i loaded in the module, everything worked like a charm, except for the last part voting result.
i dont seems to be able to catch the voting result back and show it on the crestron touchpanel.?
Question:
1. I wonder is it because is for series 2 so the last part doesnt work?
2. What is the correct way to convert series 2 to 3, i tried to set the target to 3 in the simpl+ file and recompile it,
at first it gave me S>,S< warning , where after i corrected it with no error and warning.?
but the module vote result still doesn't work when i tested it.
3. I also compare the rs232 version simpl+ file with TCP/IP version simpl+ file ?
but the command looks different, and cannot use TCP/IP version because the Bosch DCN is old unit with only COM port.?
any help would be appreciated!?
