Re: Crestron RMC3 with Cisco Touch 10 and Codec Pro
|
Hi,
On the Codec make sure that you have enabled SSH, the user has integrator privelidges en the user doesn¡¯t have to ¡°update password after first login¡± enabled. The SSH public key will be provided by the codec after successfull log on. Mahalo,
Patrick Soesman Tel: +31-6-38169901 Email: Patrick@...
toggle quoted message
Show quoted text
Op 23 okt. 2020 om 18:47 heeft Audvizer <Audvizer@...> het volgende geschreven:
? Hi,
I was wondering if anyone has ever used a setup with a processor and the Crestron Cisco Touch 10 module from the Application Market??
I¡¯ve added a button to the touch 10 with the name Display Power and ID Display Power.?
I¡¯ve then used the Widget Paramater ID as named above.?
I was wondering where I get the Unique ID from in the SSH part of the module??
It seems like I¡¯m not connecting at all to the processor though.?
I¡¯m receiving a SSH Invalid Parameter\x0D\0A string from the codec.?
This is my first time dealing with Cisco as we normally use Polycom Codec etcs.?
is there something on the codec back end that needs to be switched on or where do I find the Unique ID?
|
