Re: Upload Project to ML-600
|
Yeah, that¡¯s one of the things I plan to try later.? I¡¯ll let you guys know what ends up working, assuming I don¡¯t through the remote through a window first :).
Geoff
On Sun, Mar 15, 2020 at 4:01 PM Jason LeMay via Groups.Io <fuseman13= [email protected]> wrote: I suggest trying the null adapter. I¡¯ve had URC, Pronto, RTI, Marantz, and Crestron RS232 to stereo cables for remotes.
Not all pin out the same on 2 & 3.
> On Mar 15, 2020, at 3:49 PM, Steve Kuehn <steve@...> wrote:
>
> ?I might add that I have had several ML600 cables go bad on me.? So if one doesn't work, try another.
>
>
>> On 3/15/20 2:44 PM, Steve Kuehn via Groups.Io wrote:
>> No null modem cable needed.? Here are the steps that I know that work.
>>
>> 1) Open toolbox.
>> 2) Select Tools/SystemInfo.
>> 3) Select Address book in lower left corner of the window.
>> 4) Select the preinstalled ML600 address in the address book and click OK.
>> 5) Download the ML600 file though the project download section of the SystemInfo dialog box.
>>
>> If you still cannot connect, make sure the address box is set to the right comport for your RS232 adaptor.? Other thing to check is under "Advanced Device Detection", make sure it is not on automatic -- you want to select *ML-600.
>>
>> I have a lot of clients that love these remotes so there isn't a week that I am not downloading something to one of them.? But I am also using a 6 month old version of Toolbox (v3.03.236) to do it. I heard there are a lot of issues with the latest version of toolbox.
>>
>> Good luck,
>> Steve
>>> On 3/15/20 1:10 PM, Geoffrey Reynolds via Groups.Io wrote:
>>> I
>
>
>
>
|
