¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Crestron
  2. Messages
Single Messages Topics Expanded Polls

Re: NVX And Dante

 

Thanks for the follow-up!? Any configs you can send would be appreciated.

Currently, I am wrestling with a SG350 in our lab.? We have a few installations where we have Dante installations where our switch sits on a corporate network.? Some sort of traffic is killing some of our flows at undetermined frequencies.? The thought was to VLAN off the Dante devices, allowing the control processor to see them for control.? I'm a masochist, so I figured I'd throw NVX onto our test switch as well.? I currently have a Dante VLAN (VLAN2) and an NVX VLAN (VLAN3), with a couple of ports configuired as Cisco trunk ports (in all three VLANS).? From one of these ports, I can ping / telnet into the NVX devices and the Dante devices, but I haven't been able to get device discovery to work yet on non-dedicated VLAN ports.



On Mon, Dec 31, 2018 at 9:13 AM brian.erch@... [Crestron] <Crestron@...> wrote:
?

Interesting that this thread would pop up again right after I just dealt with the same thing on a project that is currently in progress. I configured an isolated network with three Cisco SG-350X switches in star, and I ended up separating the network into two VLANs, one for control and NVX and one for Dante. I have a Cisco RV340 set up as a router on a stick, connected to the core switch, which is handling the inter-VLAN routing. It took a while to get everything to behave, but the separation of Dante from everything else was definitely a result of the multicast settings for NVX not allowing Dante discovery and control to function well with all devices on a single VLAN.?


I pinged our Crestron Tech Director about Dante and NVX, which is of concern, especially when they will be launching the DM-NVX-352 in the spring. He didn't have any information from engineering on this (surprise...), but he said it was of interest to him as well and would get back to me when he had anything more concrete. Once this project wraps, I could post some switch configs that may prove useful in getting others off the ground.
Join [email protected] to automatically receive all group messages.