Hi Guys
I have a marine fish tank at home controlled by Crestron, I have a pump that auto fills the tank. What I would like is a module that does the following, I think it will have to be done in simpl plus which I am hopeless at.
Inputs:
High Level closes when water level reached.
Low Level?opens when low level reached.
Output:
Close to run pump open to stop.
Close if tank does not fill. (used to send a text)
Timer:
Times how long to fill from low level to high level.
Output$
The current timer value in seconds.
My theory being to avoid overfilling and the fill pump running dry the timer will learn how long it takes to fill and auto shut off the pump when the timer expires. I would like a maximum fill time which is fixed that monitors the high level switch and shuts down the system if the tank has not filled, meaning the fill tank has run dry or the pump has failed.
I hope this makes sense, also interested in anyone who has done marine tank control before as I think its a rather nice use of Crestron as long as you have fail safe in your programming to avoid floods.
Thanks Guys
