Hi all,
I am working with the Extron IN1606 and need to control the volume through this piece. I have looked through the SIS list and have found the commands to set a given level or to raise/lower/mute. My question is how do you guys handle the feedback for a gauge? Also, how would you go about using a slider instead of up/down buttons? I just got this piece(oS) dropped on me today - any help would be appreciated!
toggle quoted message
Show quoted text
--- In Crestron@..., "Chad" <getaroundtheglobe@...> wrote:
I just dropped a really basic 1606 module in the modules folder... you'd need to add a TCP driver though, port 23 is correct.-
--- In Crestron@..., Jeremy Weatherford <jweather@> wrote:
TCP port 23 on every Extron device with an Ethernet port that I've seen.
On Mon, Aug 5, 2013 at 10:26 AM, techybabble <davelynn@> wrote:
Is this accomplished by simply using a TCPIP client and sending the SIS
commands as you would RS232? What port would it run on and is there any
setup on the Extron device that has to be done? Specifically, I am working
with an IN1606 switcher and a CP3 processor. thanks for the help!
------------------------------------
Check out the Files area for useful modules, documents, and drivers.
A contact list of Crestron dealers and programmers can be found in the
Database area.
Yahoo!
Groups Links
--
Jeremy Weatherford
