this is the reason you can hear a sucking sound coming from your project profit everytime Core3 is used.
When I hear about a new bug like this, it makes me consider starting to aggressively back-charge for hardware/firmware issues. Maybe the dealers that get back-charged, will help catch Crestron's ear when they are paying extra for problems that shouldn't be.
"Ooop, this button should be working fine, turned out to be page resize bug in Core3, it took 3 hours of pulling my hair out to find the cause and perform a workaround, so here is the extra bill for my time".
toggle quoted message
Show quoted text
--- In Crestron@..., "Chip" <cfm@...> wrote:
See - this is why we can't have nice things. :)
- Chip
--- In Crestron@..., "Oliver" <oliver@> wrote:
I was able to make a subpage where the left side of the buttons worked but the right side didn't. I figured out why in the end. If you start with a subpage of a certain width, then later change the width to be more, the touch seems to only respond to the original width size. I had to create a new page of the final desired width and copy all my buttons over to get the touch to work properly right across the subpage. TSW-1050 v1.008.0015.001
OP
