I want to establish a connection between a Crestron control processor and a WF2IR unit. Everything is set up and the TCP connection works when I use either a terminal client on my PC or a CommandFusion UI on my mobile to connect to the WF2IR but I can't connect to the WF2IR with the Crestron system as a TCP client on port 4998. Do you have any ideas what else I could try? Even all other devices in the network communicate with each other without problems (Crestron<->PC, Crestron<->CommandFusionDevice...) so I doubt it's a network problem...
Even checked it with a second processor and a plain SimpleWindows programm with just the TCP client in it...
Thanks in advance!
Markus
