¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: (Beginer) Status =-257 on TCP/IP Client


Chip
 

Also, this is one of those messages that you seemingly can't get a straight answer out of tech support on.

Near as I can tell, the -257 error is what you get if you try sending serial data to a TCP/IP client that isn't currently connected. I haven't been bored enough to verify that on my own - wish T.S. or documentation could just say as much.

- Chip

--- In Crestron@..., "Chip" <cfm@...> wrote:


If the only thing you're doing is putting a 1 on the enable of the TCP/IP client and shooting serials off to it, you're getting ahead of yourself.

Monitor the analog output of the TCP/IP Client symbol. Do not send anything to the tx$ input UNLESS that value is 2.

I'm assuming you've verified the port number that you entered on the TCP/IP symbol in programming mode?

Also, get the silly stuff out of the way - connect to your processor with the command line tool and try "PING 192.168.1.179". If that fails, you've got issues aside from your SIMPL program...

- Chip


--- In Crestron@..., "avautobot1" <a.hutchison@> wrote:


hi yeah my bad that error was taken when I was trying to use a friendly name not an ip as I could not get it to work with the ip address. the error now reads the same but with the ip 192.168.1.179.

and idea what the status= -257 means

--- In Crestron@..., Kool-Aid Drinker <herald@> wrote:

67.215.65.132 is opendns.com. It looks like you typed the IP address
into the TCP-Client symbol incorrectly.


On Mon, 20 May 2013 17:34:19 -0000, "avautobot1"
<a.hutchison@> wrote:

Hi All,
As I said above I am fairly new to this, but I am trying to control a Marantz av
receiver using the TCP/IP Client. After sending the connect string all I get back is the
following message.

Notice:TCP Client Slot-08.IP-ID-25: Unable to connect to TCP server (67.215.65.132&#92;0, status = -257

Now the IP address that is listed is not the one that I have entered into the Marantz or
the IP Client module so im thinking that it must be an issue with DNS. I have tried both
the DNS server on my modem and a third party one.

Any body know what staus = -257 means or come across this problem before.

Thanks in advance for any help.

Alex

Join [email protected] to automatically receive all group messages.