Use an ANIC, drive the "Up" with the offhook FB from the dialer of choice, hold time 1s, repeat time 1s, increment 1d, min 0, max 65535, mute 0.
Will count up as long as call is active. Use an INIT with 0d to reset at end of call or whenever you want to reset.
Use a timer object on the touchpanel (pre-SmartGraphics) or a time-formatted CIP tag (SmartGraphics) or if you're feeling a little masochistic, a DIVMOD with 60d as the parameter to get separate minutes and seconds feedback.
I <3 the AINC (and the ACOMP2 but that's another thread)
Lincoln
--
Lincoln King-Cliby, CTS
Sr. Systems Architect | Crestron Certified Master Programmer (Silver)
ControlWorks Consulting, LLC
Crestron Services Provider
toggle quoted message
Show quoted text
-----Original Message-----
From: Crestron@... [mailto:Crestron@...] On Behalf Of Sean
Sent: Monday, May 20, 2013 6:34 PM
To: Crestron@...
Subject: [Crestron] Audio Conference Call Progress Timer....write your own or is one available?
Before I dig into making a timer function, is there one available that I'm missing?
I see lots of countdown timers, etc., but my client is looking specifically for a timer that starts when a call is connected.
I'm thinking a simpl+ function, not too complex or a symbol that ticks, calculates the time and formats the number to be displayed properly.
Thanks
Sean
------------------------------------
Check out the Files area for useful modules, documents, and drivers.
A contact list of Crestron dealers and programmers can be found in the Database area.
Yahoo! Groups Links
