Just curious, but did you guys alt-F12 before you loaded the program to the pro3. I don't know if it would matter, but it is worth a shot.
toggle quoted message
Show quoted text
--- In Crestron@..., "crestronthunder" <henrik9171@...> wrote:
Anyone have a confirmed solution to this problem?
I have a very similar situation with a Program running perfectly on MC3, but now after installed on a Pro3 the processor reboots intermittently with the "HW Watchdog timeout" error (iPad mini's and iphone are part of this project also) Pro3 is running FW v1.006.0026 (Feb 06 2013), sounds too similar to be a coincidence and I'm just wondering what was done to fix the other reported cases
--- In Crestron@..., "Sean" <sound.scan@> wrote:
How did you swap/replace your control system in SIMPL? I recall on another message board a situation where someone had done a control system replace and was experiencing issues very similar to yours. The fix was to create a new program with the new control system and manual copy over all of the hardware and logic folders. I'll see if I can find a link to the original thread.
--- In Crestron@..., "xymox1357" <public2@> wrote:
Well everything ran perfectly without rebooting until I moved from a MC3 to the Pro3. Then without any changes to the code First gen iPads and the mini fall offline after a few days and then finally I get a HW Watchdog reboot. This cycle repeats.
On reboot everything works perfectly.
--- In Crestron@..., "Gregg M" <jets_in_2003@> wrote:
I get the same HW Watchdog error in my cp3 that has no ipads in it, just a tsw-750 and tpmc-8x-ga. TB swears it's an issue with my code, but I have het to find the cause. All my module have never had in issue running on the MC3
--- In Crestron@..., "xymox1357" <public2@> wrote:
This just in:
System rebooted.. On its own..
From the error log "Notice: nk.exe # 20:06:51 3-10-2013 # HW Watchdog timeout"
So something is going on in the Pro3.
This is my second one. I RMA'ed one a few days ago because it went down face first and was not rebooting. After A while I got it back up and reloaded, but I decided to swap anyway.
Something seems like there is a real issue here.. And a HW Watchdog timeout is not trivial.
