You can use:
one "ilock" for sources (put feedback back to TP)
one "sio" with source names (each source button with corresponding
two "abuffer" (one for each screen) with the screen button as enable and the StringOut$ from "source sio" on the input and put the output on the TP as indirect txt (you should also feed the output to a MSP)
Clear the ilock with both sceen buttons through an or and you're ready to go.
This is from the top of my head, so no guarantee... :)
-Stig
toggle quoted message
Show quoted text
--- In Crestron@..., "gary.howes@..." <gary.howes@...> wrote:
Hello<
Here It Goes, basically on my vtp poject i have drawn 2 screens and my sources(atv , sat etc), i would like to display fb when i select source connected to my Extron 8 in 4 out switch. so when i select the source and then select which screen on the panel, i would like that source displayed on the screen selected and text fb displaying on the control. I have only been programming systems for a couple of months so sorry if this sounds a totally noob question, i'm just totally lost and at my whits end with it.
hope this make sense :s
