Always the first thing, but this is an error in simpl upon compile, before it ever hits the hardware. I've heard about some modules not being compatible from one gen processor to the next, but usually they don't even show up in the DB if it isn't compatible for the defined processor gen. Might this be what I'm seeing? I have only done a couple of 3 series so I'm sure I'm going to run into this kind of issue again, so I'm looking to gain experience with figuring out what these new errors and messages mean, and the solutions. I'll end up calling TB, but this was something I was working on at home this weekend. I figure somebody here has had to cram old hardware into a 3 series and has seen something similar. Thanks for the suggestion tho.
toggle quoted message
Show quoted text
--- In Crestron@..., "axa88" <axa88@...> wrote:
Without knowing the specific error, I would suggest you make sure your firmware on the MC3 is up to date.
--- In Crestron@..., "Kris" <kris.k@> wrote:
I am transplanting an mc3 into a system that formerly was using a cnmsx-av. The client wants a c2n-txm added. In simpl I am getting 5 errors that are saying C# errors within the complete hardware interface v4 on compile. Anyone use a 3 series processor with one of these old tuners? Any way to fix the errors?
