The Cresnet light isn¡¯t the issue here.
Some devices have that light on steady and others blink on Cresnet activity.
Only time you should worry is if the Cresnet light stays off.
Problem sounds like a hardware failure in the BiPad.
Check outputs at the PAD8 to see if the sound is good there before it¡¯s sent to the room boxes.
Also, have you added any Cresnet devices to the system? Perhaps the Bipad is underpowered.
Tray
From: Brian
Sent: Tuesday, September 18, 2012 11:48 PM
To: Crestron@...
Subject: [Crestron] Help with CNX-Bipad8
Hello experts,
I have a problem tonight with my CNX-Bipad8. After years of flawless performance, tonight it started doing something wierd. The audio that goes to different room control boxes comes out in a muffled type of sound. You can still hear the person/thing speaking, but it is not possible to actually listen to (if that makes sense). Basically bad sound. The sound does seem to be amplified though.
I have checked all the wires going into the Bipad and they seem fine. The power is supplied by a PRO2 that is plugged into the wall. the power light stays light green and the net light is a solid yellow. All the other pieces of equipment have an intermiittent yellow net light, not solid. (not sure if that makes any difference). The red light for the room comes on when the signal is sent from the room control box.
Thanks for any help
Brian
