¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: Tandberg C40 Module Help


 

It polls status every 10 seconds or so.
Press "Home" key and get this error response:
Result (status=Error): \x0D\x0A Reason: \x0D\x0A XPath: /\x0D\x0A** end\x0D\x0A\x0D\x0AERROR\x0D\x0A\x0D\x0A

Erratic responses to simple up,down, left, right etc key presses, if anything at all. I don't have a clue, it almost acts like it is over polling and the unit is confused. I'd be happy with basic remote control functions at this point, but I cant make that happen either.

--- In Crestron@..., "Stig" <ska@...> wrote:

"Data flowing" as is continuously ?
And is this the poll/heartbeat routine ?

-Stig

--- In Crestron@..., "techybabble" <davelynn@> wrote:

It has SW TC5.1.3.29001.
I see data flowing but odd or no functionality. Press the "Home"
button and it brings up the menu screen for a moment, the arrow buttons work every now and then, then menu screen jumps all around.
Something aint right.


--- In Crestron@..., "Stig" <ska@> wrote:

Also make sure you have a Cisco SW above v. TC4.2xx

-Stig

--- In Crestron@..., "Stig" <ska@> wrote:

Yes, I can confirm that the directory routines are not the best part of this module. However I know Cisco during these days are writing a new module with enhanced functionality, and it is to be released *soon*.

-Stig

--- In Crestron@..., "Chip" <cfm@> wrote:


Using that module and RS232, I've never had it *not* work pretty much right out of the box. Don't know if passwords on the unit are an issue over RS232 or not - if they are, I've just been fortunate that none of the ones I've worked with have had them set.

I will warn you that the directory routines are/can be *flaky*. I seem to recall someone here (Jeremy? Stig?) mentioning that as long as the entries in the unit itself are formatted/named a particular way that it's all good. All I know is that the one client that asked me to implement that go "odd" results on the touch panel. Unfortunately I didn't have time left on that project to dive in and debug...

- Chip


--- In Crestron@..., "techybabble" <davelynn@> wrote:

I've happing trouble getting the Crestron module working, the one from the crestron site. It is the Tandberg C90 + C60 Serial v1.3 PRO2 Demo.
According to the Tandberg site is should work with the C40 as well.
I have communication with the box, but even simple things such as IR emulation commands don't respond.

Is there some secret to using these modules. I REALLY need the phonebook directory portion of the module.
All help is appreciated.

thanks

Join [email protected] to automatically receive all group messages.