Yes, I can confirm that the directory routines are not the best part of this module. However I know Cisco during these days are writing a new module with enhanced functionality, and it is to be released *soon*.
-Stig
toggle quoted message
Show quoted text
--- In Crestron@..., "Chip" <cfm@...> wrote:
Using that module and RS232, I've never had it *not* work pretty much right out of the box. Don't know if passwords on the unit are an issue over RS232 or not - if they are, I've just been fortunate that none of the ones I've worked with have had them set.
I will warn you that the directory routines are/can be *flaky*. I seem to recall someone here (Jeremy? Stig?) mentioning that as long as the entries in the unit itself are formatted/named a particular way that it's all good. All I know is that the one client that asked me to implement that go "odd" results on the touch panel. Unfortunately I didn't have time left on that project to dive in and debug...
- Chip
--- In Crestron@..., "techybabble" <davelynn@> wrote:
I've happing trouble getting the Crestron module working, the one from the crestron site. It is the Tandberg C90 + C60 Serial v1.3 PRO2 Demo.
According to the Tandberg site is should work with the C40 as well.
I have communication with the box, but even simple things such as IR emulation commands don't respond.
Is there some secret to using these modules. I REALLY need the phonebook directory portion of the module.
All help is appreciated.
thanks
