开云体育

I need to be able to put the unit into the following modes: (normal, push to talk, voice on activation & request to talk - with a next speaker button).

I have read through the horrible documentation and think the below is what I need, but still having a tough time figuring out how to write this out in order to achieve the above.

If anyone has worked with one of these units and cares to throw a dog a bone here, that would be much appreciated.


set_mu_global(a,b,c,d,e,f,g,h,i,j,k,l,m,n)

a – {} – reserved / unused (write nothing – next comma);
b – {} – reserved / unused (write nothing – next comma);
c – {0..50} – voice activation sensitivity (max sensitivity = 0);
d – {0..255} – MU hold time;
e – {} – reserved / unused (write nothing – next comma);
f – {} – reserved / unused (write nothing – next comma);
g – {} – reserved / unused (write nothing – next comma);
h – {0..255}:
– low nibble = allocation mode (1 – normal, 2 – PTT, 3 -VOAC) ;
– bit 4 = manual power off enabled (1) / disabled (0); j – {0..8} – priority mode;
j – {} – reserved / unused (write nothing – next comma);
k – {on, off} – enable / disable the auto-lock feature of the MU;
l – {on, off} – enable / disable override;
m – {0..9} – NOM;
n – {on, off} – enable / disable NOM mode;
This command changes the global parameters of the MU.Considering the large number of reserved / unused parameters this command will be sent as:
set_mu_global(,,c,d,,,,h,i,,k,l,m,n)