If there are any lurkers, I spent a little time on it today and it seems like I'm receiving a different prompt than the Crestron module. The Crestron module shows you should receive VBrick> and I receive VBrick#. I realize this may mean I'm logged into the wrong 'account' or something like that so I have two questions that might help.
1) Does a special account need to be setup for Crestron for control, or just login the general admin account?
2) Is there any setup for the serial port, or just leave it 'disabled', meaning not a responder or initiator.
Thanks all!
toggle quoted message
Show quoted text
--- In Crestron@..., "matt_rasmussen_2000" <mjrtoo@...> wrote:
I'm using the module on the Crestron site, have called VBrick and they say the SDK is the same across the encoder line, the guy setting up the VBrick says it's setup properly...I'm stuck in the middle. :)
I've used the module on other devices and it's been fine, so I'm thinking something isn't setup right, but want to cover all my bases.
