Hey all,
I discovered an issue with the newest version of systembuilder (3.10 I think). The problem I found pertains to any of us using urc remotes (mx900, mx980 etc.) In my system I added the urc by adding an mt500c remote into the system and programming the joins accordingly. My setup was working just fine until I decided to upgrade to the new version to try out the new weather module(which is actually pretty cool). Once I built the system in the new version of SB most, not all of the functions of the URC remote ceased to work. After hours of troubleshooting I discovered that for some reason was limiting the # of joins on the mt500c symbol to 32 Joins, so anything within that range still worked, but anything past that was dead. So all i had to do was open the simpl program manually, find the remote symbol, expand it for the appropriate # of joins, and make the necessary connections. Once this was done I was back up and running. Luckily this was my own home and not a customer,so it wasn't an issue. But I know how stressed I would have been had it been the other way around. Hopefully this helps some of you out there avoid the pain before it becomes an issue. Thanks guys!
Shaun
