开云体育

Do you mean full foot to the floor on a literal sence. Are you running out of room to push the pedal? That would be from air in the lines, or your brake fluid level is low. I am assuming that is not

Hi All, When I bought my CCar, the brakes (while they worked) weren't good and I figured they could use some work. Here's what I've done so far: Replaced the master cylinder. I did bench-bleed it.

I have a kilovac coming of the 48v pack and it is also fused with a 400a slow blow fuse. The frame of the car is also ungrounded. All the grounds splice together in industrial grade explosion proof

Hi Nick and All,? ? ? ? ? ? ? ? ?? Yes it is strange and intermittent and certainly can cause a contactor, especially if already pitted, to sizzle, hum. As can the motor itself.? ? ? ?

Yes the f/r contactor. But I go f/n/f not reverse, to avoid accidentally sending voltage the wrong way. If it does it a lot... You might have an alignment problem with your contacts, or the coil is

What is strange is that it is such an internment noise. Never really get it to do it when you try. Fun little cars. I keep a fire extinguisher in the car in case. But so far I have had no problems

Hi Nick? and All,? ? ? ? ?? Yes this happens and is in the motor.? But not a problem. ?? The series? motor seems to get stuck in high power/torque? mode when accelerating and pulling a lot

That is from the f/r contractor. Not from the controller or the motor right? As you said I will toggle the contractor back and forth from forward to reverse sometimes and that will usually make it

Mine seems to do this as well--It usually moves but not very well when it does so. Mine is an original contactor setup--but even with the Altrax controller, I assume you have at least one contactor

Every once in a while mine does that too. It's the sound of the contact burning a little. Most often mine will do it if it has been super humid out. My quick fix is to toggle forward neutral forward

I have had this happen alot in my car. It has a d&d motor 48v and an altrax axe controller. The wiring is all new in the whole car. It uses the stock forward reverse contractor. Sometimes when I hit

Cute. Original color? Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ Sent: Saturday, April 13, 2019 9:55 AM To: c-car@... Subject: [C-Car] Re: Citicar meetup?

Man, the Yahoo groups framework is really quite bad. Here's a link instead :) https://twitter.com/user47/status/1109522766171115520 https://twitter.com/user47/status/1109522766171115520

Here you go, Mark! Not a great photo. Mine is currently wrapped up in a tarp awaiting a spot in the garage, much to the neighbor's dismay.

Anyone have the link to the master list of cars. I would like to see if it is up to date with mine included. I am not sure if I put it out there when I bought and restored it years ago.1976 citicar

That is a lot of cash . Maybe jay leno will buy it Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ Sent: Friday, April 12, 2019 12:54 PM To: c-car@... Subject:

If you want to spend some cheddar there is one for sale on craigslist for 14,000 https://quadcities.craigslist.org/cto/d/davenport-1976-vanguard-citicar/6857601855.html It is restored though.? Sent

im with the florida citicar ev club we just had a 3 day group meet in feb at the lakeland linder airport have you joind the florida citicar ev club on facebook that is ware i post the up coming events

I had my 72 volt C-car set up right.? Equal weight on each wheel.? New shocks.? 1/2" of toe which really stabilizes the ride at the expense of range.? We got out behind my restaurant with a buddy

Do you have a pic of your Lime green CCar? Mine will need a paint job when I’m done with the bodywork. I’m thinking Syracuse Orange, but love Lime green as well. Mark Barbour Sent: Friday, April