Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
Re: Battery Hookup source, details
|
Hi Jacob and All, ? ? All true and generally excellent advice except facts on Volt says it doesn't need them has been proven.? I gave the facts, use them as you want.? But I'm not paying more for a BMS than modules cost that have their own problems,? unless needed. Nor am I the only one, very few of the 1,000s that use Volt modules now, certain LG cell modules of other EVs like BMW, Volvo,? have had excellent service, life with them. Just check the cells to make sure they are staying in balance.? If they get out of balance which hasn't happened in the many I've used, sold to other EVers , just put a BMS on it.? And to show just how good they are for Volt modules in 3 yrs without a BMS, the cells are still within 1/100th a Volt of each other. Others get the same result. Check on youtube for many examples.?? Jerry
On Saturday, June 18, 2022, 09:47:07 AM PDT, Jacob <jacobtimothyfield@...> wrote:
Not using a BMS is a recipe for firey disaster if anything ever goes wrong. You can probably get away with it since the cells are healthy and aging pretty equally, but the purpose of a BMS is to make sure each cell in series doesn't overcharge or over discharge. If either condition occurs for too long, it can result in damage that can cause thermal runaway, and lithium fires are not fun. (Seen the videos of the Chevy Bolts on fire? That kind of fire.) The biggest danger is that your charger could be charging your string of series cells to the right overall voltage, but one might not charge to the right level, leaving the rest at a higher than normal state of charge, accelerating wear, and getting closer to a thermal runaway event - and you can't tell unless you're checking individual cell levels, because the charger only knows the voltage of the entire string, not each cell.? Simple BMSs aren't very expensive, nor are they difficult to install. I'd highly recommend using them with any lithium battery pack. That being said - you definitely can get away with not using one, but you should know the risks, and I personally feel like the safety justifies the little bit of extra cost and work of adding a BMS. - Jacob On Sat, Jun 18, 2022, 9:38 AM jerry freedomev via <freedomev=[email protected]> wrote:
|
to navigate to use esc to dismiss