¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: Replacement motor


 

I like the GPS speedo,? however... very few things are labeled vanguard on the citicar. The speedo is one. I'd be sad to loose that. But I would if I can't make it work. I do think I made it work. Check my pics. I made an adapter to sandwich the original drive onto this. It works on the bench. We will see after some miles. And I have to find some matching bolts for it. And peel all the plastic off the face of the stainless scrap I used. I also attached a pic of the ge outlet matched to this motor which could probably work.?


On Sat, May 2, 2020, 5:19 PM Nicholas Gee <nicholasgee58@...> wrote:
Only downside is cost., sumit racing has one but it is $350



Sent from my MetroPCS 4G LTE Android Device

-------- Original message --------
From: NeonJohn <jgd@...>
Date: 5/2/20 3:59 PM (GMT-05:00)
Subject: Re: [c-car] Replacement motor

Instead of all that hassle, you might look at a GPS-based speedo.? I
think VDO makes them.? Probably other instrument manufacturers. It is a
very hansom analog gauge with an odometer.? What is really great is that
it has an optional servo motor output designed to drive the OEM speedo.

I had to buy one when the cable on one of my hotrod Datsun Z cars
seized.? The torque broke the speedo drive shaft coming from the
transmission.? I thought about all the work it would take to change out
that shaft and oped for the GPS unit.

It containes enough electronics to dead-reckon through loss of signal
such as going through a tunnel.? I have several moving mode police
radar.? I tried one against the speedo.? When I set the radar unit to
"display patrol car speed", the two agreed to the resolution of the
radar.? It didn't display decimal MPH.

If the unit is wired according to the instructions, the GPS receiver is
always on.? Thus, unless you park in a metal-roofed garage, the speedo
will register the car's first motion.

I was completely satisfied.

John


On 5/1/20 11:38 AM, Dave Brice wrote:
> I left the shaft coming out the front.? Tonight I will modify something to
> make it fit hopefully.?? If not, the shaft out the front is keyed and I
> could use a sensor and aftermarket speedometer easy. But I'd prefer the
> original. my cable is fubar though after the motor failure.
>
>




Join [email protected] to automatically receive all group messages.