Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
- Bpq32
- Messages
Search
|
Re: BPQ32, IC7610, SCS MODEM, VARAHF
John My SCS modem is connected to ACC USB D! and to use the sound card in the radio it has to be USB D2 don't know if this? will help. Thank you for all your hard work Rich NS;7K ----- Original Message ----- From: John G8BPQ <john.wiseman@...> To: [email protected] Sent: Sun, 14 Feb 2021 04:12:05 -0500 (EST) Subject: Re: [bpq32] BPQ32, IC7610, SCS MODEM, VARAHF The code does not have support for the IC7610. With the IC7600 the rig is left in Data 1 when using sound card modes, but the input source is switched from ACC to USB when transmitting. Would the same approach be ok for the 7610 as well? 73, On 13/02/2021 21:35, RICHARD G FISHER Owner wrote:
|
|
Re: About some linbpq failures
Richard Hendricks - KE0GB
I just checked my forward settings to K5DAT as well, and they were still set at non-binary.
I'm still searching thru my 210214_BBS.txt and find no instance of any BBS remotely changing my SID features, but afterwards from GB7YEW, WA6RZW, and VE3BWM, my BBS was responding with, for example: 210214 00:00:51 |GB7YEW? ? Incoming Connect from GB7YEW
210214 00:00:51 >GB7YEW? ? [BPQ-6.0.21.24-B2FWIHJM$]
210214 00:00:51 >GB7YEW? ? Hello GB7YEW.? 0 unread message(s).
?
210214 00:00:51 >GB7YEW? ? > ...after I had changed my BBS back to non-Binary only in GB7YEW's BBS profile again this morning. Rick - KE0GB |
|
Re: Scanning continues during RPR connect
Here my config for 40m (worked fine for long time): |
|
Re: About some linbpq failures
Update - after I sent that last email I looked through forwarding settings and found that KE0GB, N9PMO, N3MLB and KD5LPB were also set to B2 for binary.? I changed them all to B1 except Rick's which I changed to remove all binary.? After checking less than an hour later, the settings for KE0GB and KD5LPB were already back to B2.? VE3CGR was also back to B2.? I copied another BBS log file after finding those settings changed, which is attached. 73, Lee K5DAT On Sun, Feb 14, 2021 at 10:33 AM K5DAT via <kilo5dat=[email protected]> wrote:
|
|
Re: About some linbpq failures
Logs attached.? I removed all binary from the forwarding settings for VE3CGR yesterday evening - not sure exactly what time. This morning it was back to allow binary checked and B2 checked.? So given the log is in UTC the change either happened late in the Feb 13th log or sometime in today's log.? Both are in the attached zip file. Thanks, Lee On Sun, Feb 14, 2021 at 3:36 AM John G8BPQ <john.wiseman@...> wrote:
|
|
Re: Scanning continues during RPR connect
¿ªÔÆÌåÓýThat should work. Where did you put it? - it should be in the Dragon port config after the CONFIG statement.73, John On 14/02/2021 11:49, Martin wrote:
John, |
|
Re: About some linbpq failures
¿ªÔÆÌåÓýI can't reproduce this. Do you have a BBS log showing what has happened between it sending the plain text SID and sending the B2 SID?Thanks, John On 14/02/2021 08:31, John G8BPQ wrote:
It isn't supposed to do that. I'll look into it. |
|
Re: BPQ32, IC7610, SCS MODEM, VARAHF
¿ªÔÆÌåÓýThe code does not have support for the IC7610. With the IC7600 the rig is left in Data 1 when using sound card modes, but the input source is switched from ACC to USB when transmitting. Would the same approach be ok for the 7610 as well?73, John On 13/02/2021 21:35, RICHARD G FISHER
Owner wrote:
Any help with BPQ32 I am running a IC7610 and SCS modem and trying to use VARAHF |
|
Re: About some linbpq failures
¿ªÔÆÌåÓýIt isn't supposed to do that. I'll look into it.Thanks, John On 14/02/2021 02:52, Richard Hendricks
wrote:
I'm already on .24 and it still does it, Lee.?? |
|
Re: About some linbpq failures
I have seen this as well - but so far with only one forwarding partner. He changed his side to B1 yesterday, and I changed mine back yet again to B1 at around the same time. However this morning I found mine back on B2. I was on the .13 beta. Just upgraded to .24 a?few minutes ago.? Thanks,? Lee K5DAT? On Sat, Feb 13, 2021, 3:29 PM Richard Hendricks <rickh6155@...> wrote: This was taken directly from my BBS earlier today.? I've noticed the same thing? |
|
BPQ32, IC7610, SCS MODEM, VARAHF
Any help with BPQ32 I am running a IC7610 and SCS modem and trying to use VARAHF
everything works great until I try and connect to the VARA part.? I am running the SCS modem on D1 and VARA on D2 it will not automatic change from D1 to D2 it still thinks it should be in D1.? If I change the radio manually to D2 VARA works great. I can send a copy of my config file.? Ray helped me get this far. Rich NS7K? |
|
Re: About some linbpq failures
Richard Hendricks
One further comment.? The Statement:? "Several days passed...addressed it :( "
...was meant to be included as part of the original commented text, and not from me. My comments start with:? Obviously, they don't know... Also, to view the complete bulletin, the BID is:? ?Bid: 3330_I0OJJ Just wanted to clarify those a bit. Rick - KE0GB |
|
About some linbpq failures
Richard Hendricks
This was taken directly from my BBS earlier today.? I've noticed the same thing?
happening to my system over the past few weeks but haven't determined which version it started with, but it did occur in 6.0.21.1: ?On 2/13/21 2:21 AM, vk2rz@vk2rz.#syd.nsw.aus.oc wrote:
> R:210213/0121Z 2895@VK2RZ.#SYD.NSW.AUS.OC LinBPQ6.0.20
>?
> Hi Gustavo,
>?
> Something very strange is going on - I keep setting forwarding to use B1 mode for I0OJJ, but after a few hours it changes back
> to B2. This only occurs for I0OJJ. I'm looking through the logs, but is there anything in the config at your end that is manual
> ly forcing B2 mode?
>?
> I'll look into the other issue as well.
>?
> Best 73s, Al
?
?
Several days passed on addressing the above linbpq failure,
but no way to address it :(
Obviously, they don't know about the groups.io reflector, so I thought I would pass this on to you, John. I have all of my partner BBSes are set to forward here without any binary com- pression, but I noticed that some who do use either B1 or B2 compression is somehow forcing my BBS to change to their compression instead of staying at the default non-binary that I had chosen, even when my SID shows no? compression feature:??[BPQ-6.0.21.24-IHJM$] Is this something new or perhaps a bug in the code? 73 - Rick KE0GB |
|
Re: Linbpq Upgrade
On Sat, Feb 13, 2021 at 2:10 PM N1RCW <rwtech61@...> wrote: Hi John, If you or anyone is available, I need to upgrade my version of Linbpq running on a pi3,and I'm sure it's posted somewhere but haven't found it yet. Anyone have the latest upgrade command line process to upgrade to the latest? (after shutting down BPQ) From the directory where your pilinbpq executable is located: mv pilinbpq pilinbpq.bak wget chmod +x pilinbpq Then restart BPQ. If you normally rename the pilinbpq file to "linbpq" before running it, then the commands are a little different. mv linbpq linbpq.bak
wget mv pilinbpq linbpq chmod +x linbpq Then restart. 73, Lee K5DAT |
|
Re: renumbering
The only way is to set Max Message Number (in Housekeeping) to a bit above the number of messages on the BBS and then run housekeeping. Remember to set it back to normal afterwards!
toggle quoted message
Show quoted text
73, John On 13/02/2021 10:40, Dave via groups.io wrote:
I've created a PMS for a radio amateur friend of mine from a copy of |
to navigate to use esc to dismiss