开云体育

Thanks Mark ??? Here are 2 parts - the port 2 works while port 5 still shows up in the port list: ; /* PORT ?? ?PORTNUM=2??????? ; Optional but sets port number if stated ?? ?ID=VARA

I’m wondering what are valid values range for the Enable forwarding/Request reverse fields? And what other sysops set these to when doing RF forwarding? TIA Jim KI0BK

Multi line comments work for me multiple times throughout the file. Mind sharing a part of your file that does not work? -- 73, Mark, N5MDT Montgomery, Texas http://n5mdt.ham-radio-op.net:52852

While creating a new BPQ node I used the multi line comment in several places in the cfg file. It appears that only the first instance is recognized as following ports were still showing.? I had to

No, but I create a separate directory for each instance and run from there. 73, John

Is there a command line option to specify which config file you want to use for QTSoundModem. Would like to run two instances for two different radios. Thanks, -Chris KO4YAW

I did a search and don’t find this exact topic. ?I already operate an APRS Fill-In digi/iGate based on the WX3in1mini and don’t want to duplicate that or take that one off the air—it’s

It might be simpler to use APRSISCE ( http://aprsisce.wikidot.com/ ) instead of BPQ32. And Direwolf ( https://github.com/wb2osz/direwolf/blob/master/README.md ) handles weak signals better than UZ7HO.

I would suggest using QtSoundModem rather than UZ7HO's version. https://www.cantab.net/users/john.wiseman/Documents/QtSoundModem.html Configure it to use the KISS interface, not the AGW interface. A

Right on Jeff. Also... Aprs digi section starts and stop with the following: APRSDIGI **** When it see ENDAPRSDIGI it will result in a non-critical error message if it is not a comment.? (The line

Hi Alan, It's looking for the actual line of four asterisks.? It goes at the end of the APRS config section.?? Here's mine below: APRSDIGI APRSCall=KP3FT-3 StatusMsg=https://tprfn.net Symbol=B ?

Yes, I got my rf port working. Whenever I append the APRS configuration at the end of my BPQ32.cfg I get an error from BPQ32 Console that says, "Missing **** for APRS Config" "Conversion failed" I am

250221 12:14:55 |N9SEO ? ? Connecting to BBS N9SEO 250221 12:14:55 <N9SEO ? ? *** CONNECTED 250221 12:14:55 >N9SEO ? ? ATTACH 5 250221 12:14:56 <N9SEO ? ? MONTTX:N5MDT-13} Ok 250221 12:14:56

Don't think of it in terms of getting an aprs station up and running.? Before that happens you need to have BPQ controlling a radio port only.? Do you have that yet? The first line of the docs in

Here are 2 of my script lines for my ICOM RADIO 7.1032 USB D 2 RADIO 3.5924 USB D 1 These both work here for filter 1 & 2 based on BW of the connection. Glenn/N3MEL

Gang, I have been using BPQ32 for about four months now but I still cannot crack the code for running a APRS station. I have been experimenting with creating/editing my BPQ32.cfg file but still can

Thanks to you both... making adjustments now.

John, ????? At least if we could do CC to a call, that way I am sure less messages address to sysops would be lost or not read. 73,? Jean

Sysop is simply a TO call destination, right?? Wouldn't it show in mail listing anyway? Would it matter if it were a bull or personal? -- 73, Mark, N5MDT Montgomery, Texas

Thanks John, I tried the following in connect scrpt (after attaching port): Radio 14.105,F2???? Set the frequency and connected. Ignored the F2 (Icom filter 2) Radio F2,14.105???? Error bad