开云体育

Thanks Mark
??? Here are 2 parts - the port 2 works while port 5 still shows up in the port list:

;
/*
PORT
?? ?PORTNUM=2??????? ; Optional but sets port number if stated
?? ?ID=VARA VHF
?? ?DRIVER=VARA
?? ?CONFIG
?? ?ADDR 127.0.0.1 8300 PTT CI-V PATH C:\VARA\VARA.exe
?? ?RADIO=1
?? ?BW500
;??? WL2KREPORT PUBLIC, server.winlink.org, 8085, WX4MC-10, EL97vd, 00-23, 145730000, PKT1200

ENDPORT
;
*/

Other ports are between these ports

*/
;PORT
?? ?PORTNUM=5??? ??? ; Optonal but sets port number if stated
?? ?ID=BPQ APRS??? ??? ;144.390 MHz??? ; Displayed by PORTS command
?? ?TYPE=ASYNC??? ??? ; Port is RS232 Com
?? ?PROTOCOL=KISS??? ??? ; TNC is used in KISS mode
?? ?KISSOPTIONS=CHECKSUM,ACKMODE
?? ?IOADDR=6??? ??? ; 1 = SERIAL PORT COM1 ETC.
?? ?SPEED=9600??? ??? ; RS232 COM PORT SPEED
;??? CHANNEL=A? ??? ??? ; Address if multichannel TNC
?? ?QUALITY=0??? ??? ; Setting to 0 stops node broadcasts
?? ?MAXFRAME=3??? ??? ; Max outstanding frames (1 thru 7)
?? ?TXDELAY=300??? ??? ; Transmit keyup delay in milliseconds
?? ?SLOTTIME=100??? ; CMSA interval timer in milliseconds
?? ?PERSIST=175??? ??? ; PERSIST=256/(# of transmitters-1)
?? ?FULLDUP=0??? ??? ;
?? ?FRACK=5000??? ??? ; Level 2 timout in milliseconds
?? ?RESPTIME=2000??? ; Level 2 delayed ack timer in milliseconds
?? ?RETRIES=10??? ??? ; Level 2 maximum retry value
?? ?PACLEN=236??? ??? ; Default max packet length for this port
?? ?L3ONLY=1??? ??? ; 1=No user downlink connects on this port
?? ?DIGIFLAG=0??? ??? ; Digipeat: 0=OFF, 1=ALL, 255=UI Only
?? ?DIGIPORT=0??? ??? ; Port # on which to send digi'd frames
?? ?USERS=0??? ??? ; Limit # of L2 sessions, 0 = no limit
?? ?UIONLY=1??? ??? ;1 = no connects on this port
;??? UNPROTO=WPLAN WX4MC-3
;ENDPORT
;
/* ? These block were not originally here..
;
*/
;
APRSDIGI
;??? ;; = lines needed for bpqaprs
?? ?APRSCall WX4MC-3
?? ?StatusMsg=BPQ32 - IGate, BBS, Winlink - Martin County, FL.
;
?? ?Symbol=_???????? ; Icon to display for station.? old = a
?? ?Symset=/???????? ; This is a "B" in a Red Diamond. old = B
?? ?PHG=PHG5360/
;
?? ?APRSPath 5=APBPQ1,WIDE2-1?????????? ; Dest and up to 8 digis

?? ?Digimap 5=5,IS?????????? ; Packets from 5 to APRS-IS
;??? Digimap 7=7,9,IS?????? ; Packets from 7 to 7, 9 and APRS-IS
;??? Digimap 9=???????????? ; Don't digi packets received on port 9
;??? Digimap 7=???????????? ; Don't digi packets received on port 7
;
?? ?TraceCalls=WIDE??? ??? ; Calls for CALLN-n Processing with Trace
;??? FloodCalls=GBR???????? ; Calls for CALLN-n Processing without Trace
?? ?DigiCalls=WIDE1-1??????? ; Calls for Normal (ie no SSID manipulation) Digi
;??? For a Local "Fillin" Digi, you could include WIDE1-1 and leave out ;
;??? ??? TraceCalls and FloodCalls
;??? ??? ??? ??? ??? ???
;??? ReplaceDigiCalls?????? ; Replace DigiCalls with APRSCall.
;??? ??? ?Omit if you want the call to be left as it is received.
;??? ??? ??? ??? ??? ???
;??? MaxTraceHops=2???????? ; Max value of n in CALLN-n processing.
;??? ??? If a packet is received with n greater than
;??? MaxFloodHops=2???????? ; this, the value will be replaced BEFORE it is decremented.
;
;??? GPSPort=0????????????? ; if specified, lat/lon will be taken from a GPS
;??? GPSSpeed=0
;
;??? You can specify a fixed LAT/LONG instead of using GPS
;
?? ?LAT=2707.89N??? ??? ?????? ; Must be in standard APRS Format (ddmm.mmN/S)
?? ?LON=08013.53W???? ??? ?; Must be in standard APRS Format (dddmm.mmE/W)
;
;??? IGATE Params. If specified you will gate RF packets and your beacons to APRS-IS
;
?? ?ISHost=rotate.aprs2.net??? ; Was indiana.aprs2.net, APRS-IS Host Name. May be either an IPV4 or an IPV6 Host
?? ?ISPort=14580???????? ; Was 10582, Normal port for a filtered feed
?? ?ISPasscode=21495???? ; If you don't already have a passcode I can issue you one.
;
;ISFilter=M/300???????????? ; Filter Command if needed or f/wb4moz/300
MaxStations=500
;
;WXInterval=5
;WXPortList=5
;WXFileName=c:\Web\WXNOW.TXT
;WXComment=Wellington,Fl? WB4MOZ-3
;
****
;
*/
;

73? John? wb4moz