开云体育

OK, I've been on the latest update for a while now, but so far no incoming connections on the VARA port have happened. [email protected]> wrote:

Hi Mark and the group, I've double checked the version of the DLL and the version of BPQMail. Both are to 6.0.24.62. Where can I look for more clues ? The BPQMail keeps crashing after 10 seconds (more

Looks like in both cases it is crashing processing the message following LINK REGISTERED. The latest update should display the message before processing it. 73, John 2025-02-17T11:43:54.984053-06:00

Thanks. I've made a few changes to the debug code. Could you re-download and try again? 73, John

Here's a new one. So far I think this has happened only on 20m using the following frequency, which is set to VW in the scan line. The incoming connections are most likely set to BW500 at the other

Thanks John,? I finally did find someone that answered my connects and it was perfectly normal, even with the listen light yellow. -- 73, Mark, N5MDT Montgomery, Texas

That is as intended. When you attach it assumes you are going to make a call, so blocks incoming calls. 73, John

OK, here's a new one with the modified code. VARA Log: 2025-02-17 16:44:33 Incoming connection... 2025-02-17 16:44:35 Incoming connection... 2025-02-17 16:44:38 Incoming connection... 2025-02-17

My Vara port works fine for receiving, as far as I know.? To my node, to my BBS, and to my RMS. As soon as I attach the Vara Port either via a terminal or a forwarding connect script the LISTEN light

Nice. I have it running - shows as .63, so that should be it. Thanks, Lee [email protected]> wrote:

I just can't see where it is crashing I've built a version that logs a whole load of extra stuff to syslog when processing? an incoming connect. Hopefully that will help narrow down the problem. File

Use your Windows Explorer and go to c:\windows\sysWOW64 and find the bpq32.dll file. Right click on it, select properties, details, and verify the version. Then check the BPQMail.exe file at c:Program

OK, there's already a new one this morning. This time it correlates to an incoming VARA connection from a different station, so N9SEO can rest easier. :-) I have an external script that detects when

Hey Ray, Yes, I did that. My BPQ32 is at the lastest beta version. Narco

Did you download the bpq32.zip file and update the bpq32.dll file ? Ray N3HYM

Update - here are the syslogs from yesterday for the crashes at 16:54 UTC and 19:00 UTC (Syslog is in local time). 2025-02-16T10:53:04.094407-06:00 odroid LINBPQ[19870]: Sending APRS Beacon to port

Hi all, I've upgraded my BPQ32 running on Windows 10 to the version 6.0.24.62. BPQMAIL has been upgraded to 6.0.24.62 as well. When I execute BPQMAIL it runs for few seconds and then it crashes. I

I think I read that syslog is depreciated in this version of Ubuntu, but I can look at pulling the equivalent if that's the case. Yesterday it was the same station, but when I first saw it happen in

[email protected]> wrote: Fyi, KIDDER is G8PZT (Paula's XRouter node). I have a link, so anyone that can reach either K5DAT-7 or K5DAT-5 can reach KIDDER via "C KIDDER" or "C G8PZT". 73, Lee K5DAT

Thanks, Lee. I checked the code and there haven’t been any significant changes to the VARA code since .53 so something odd is going on. Do you have the syslog for the time of this crash? Is it