开云体育

Yes, you can. But unless you have clients wanting to use it it may not be worthwhile. According the traffic stats on the Winlink.org site, of the 20,525 HF connections last month only 2 were using

Is possible to use WinRPR on BPQ32 to offer a RMS Gateway? Em sex., 2 de ago. de 2024, 12:31, Chris Lance WW2BSA via groups.io <Ww2bsa= [email protected]> escreveu:

One of my AXIP links utilizing ddns.net (on his end)? has failed. He sees me and I appear in his routing table, however a netrom route for him is never established on my side. He remains

Its been a while Greg since I had mine online. But what I remember it worked fine to me and decoded better than WinRPR. It worked well with the SCSTracker driver here when I ran it. I did not try

Thanks Chris.. I'll check them out. Best regards, Gary, K7EK ?Get BlueMail for Android ?

Hi Gary,I haven't experimented yet, but found these pages by John regarding Robust Packet and BPQ32 for the SCS that are worth reading.? I guess John would know if this would also apply to the

I'd be interested in adding a Teensy RPR port to my Windows BPQ32 BBS/node. I would like to hear from others that have done this successfully. A question comes to mind. Since my BPQ32 system

Thanks a lot for all answers. I'll test IL2P. :-) Em sex., 2 de ago. de 2024 10:25, Mauro Veiga <maurorveiga@...> escreveu:

Are you sure that connections are being made to that system after that date?? It will not create a log if no connections were made.

I manage a couple G8BPQ BBS systems for our ARES Team. on one of the systems the CMS log has stopped being recorded for the last few days. When I go to c:\users\rschn\appdata\bpq32\logs there is not

RPR is copyrighted. It is not an open mode. I myself have access to software I've been paid to develop that I should not but could put out into the world that my employer may or may not choose to sue

Hey John, Sure thing. The other station is indeed the AEA DSP-2232. I will get that set up today and let the other user know to try it again. It's over HF and not a short hop but we usually have a

Hi Chris, Can you run linbpq under gdb and get a backtrace when it crashes? Can you also confirm that it is the other end using the DSP-2232? I'm assuming that as you say your are using Direwolf at

Thank you for your comments Chris, N6CTA on Robust Packet Radio, However, I'd like to request where you are getting your data from? I just bought a SCS tracker clone called a

I think there is a fairly active group of folks in the UK using IL2P+CRC on 40 meter NVIS. The most robust HF mode in the NinoTNC now is 300 symbol/sec BPSK, switch position 1000 on recent firmware.

Mario et alia: I have 2 ports of IL2P on my QtSoundModem configured. Evenings through mornings I am on 7103.3 and 7102.8 kHz center. Mid-day I am on 14104.3 and 14103.8 kHz center. 1 port is also

Seems like Nino removed 150Bd but there are other HF mode improvements so I guess not all is lost. It was not meant for HF from the outset so I guess I shouldn't be too surprised.

Hey All, (this is really for G8BPQ) An AEA DSP-2232 is managing to crash linBPQ, not good. The frame headers and flow control look different from every other piece of hardware/software that connects

RPR either costs a lot in SCS hardware, or you run an illegally distributed piece of windows software. Neither are optimum solutions. When Direwolf officially supports the current state of IL2P I'll

Try Robust Packet Radio (RPR) Highly underrated digital mode. Great on HF.73 de Chris ww2bsa