IN.USA.NOAM On 5/28/25 07:07, Don via groups.io wrote: Good day
Looking for an IN station to exchange udp mapping.
DonP Edited: NC8Q?de?NC8Q> ih in KA9LCF??KA9LCF.#NEIN.IN.USA.NOAM?BRADD?46818?FORT?WAYNE,?IN W9ECG??W9ECG.#NEIN.IN.USA.NOAM?Steuben?46703?CountUE?Angola,?IN KC9VYU??KC9VYU.#NEIN.IN.USA.NOAM?Joe?46725?Columbia?City N9LYA??N9LYA.#SIN.IN.USA.NOAM?Jerry?47446?Mitchell,?IN W9JUN??W9JUN.BPQ.#SEIN.IN.USA.NA?Don?47231?North?Vernon,?IN KC9VFR??KC9VFR.#NWIN.IN.USA.NOAM N9PXO??N9PXO.#NEIN.IN.USA.NOAM?JAMES?46761?LaGrange,?Indiana VE3MIS??VE3MIS.#SCON.IN.CAN.NOAM?Daniel??Mississauga,?ON KC9DDP??KC9DDP.#SIN.IN.USA.NOAM???Mitchell K9UY??K9UY.#SIN.IN.USA.NOAM?Hoosier?47446?Mitchell,?IN W9LCF??W9LCF.#NEIN.IN.USA.NOAM?Bradd?46845?288307 WW6Q??WW6Q.#NEIN.IN.USA.NOAM?Roy?46779?Pleasant?Lake,?IN K9BIF??K9BIF.#NEIN.IN.USA.NOAM?CHARLIE?46527?GOSHEN,?IN NC8Q?de?NC8Q> KA9LCF, N9LYA, W9LCF, and WW6Q have posted in this email list before.
|
Re: Bad config record RADIO=1
Remove the ¡°=¡° sign
ie
radio = 1 change to
radio 1
?
and as been pointed out, place the radio 1 line after the address line.
?
73
?
|
Well if you just want to play around i am trying to get a udp to work too¡.. but no partners.
You can try ve3pkg.dyndns.org on port 10093
I think i still have something wrong in my setup as i do not see my system listening on 10093 when i do a netstat.
toggle quoted message
Show quoted text
On May 28, 2025, at 8:19?AM, Don via groups.io <donpjr@...> wrote:
? Yeah, I was just saying that I¡¯m in Indiana
On Wed, May 28, 2025 at 08:18, Bob-va3rjs via groups.io < va3rjs@...> wrote: Yes after i emailed i realized what the IN was ? what can i say Canadian ham with a Canadian mind?
Bob
> On May 28, 2025, at 7:51?AM, Chuck Gelm <nc8q-aredn@...> wrote:
>
> ?On 5/28/25 07:26, Bob-va3rjs via groups.io wrote:
>> Wow i don¡¯t even know what that is¡..??
>
> Hi, Bob:
>
> I think DonP is seeking a link with a
> IN.USA.NOAM BBS.
>
> 73, Chuck
>
>
>
>
>
>
--
Bob
va3rjs
|
Yeah, I was just saying that I¡¯m in Indiana
On Wed, May 28, 2025 at 08:18, Bob-va3rjs via groups.io < va3rjs@...> wrote: Yes after i emailed i realized what the IN was ? what can i say Canadian ham with a Canadian mind?
Bob
> On May 28, 2025, at 7:51?AM, Chuck Gelm <nc8q-aredn@...> wrote:
>
> ?On 5/28/25 07:26, Bob-va3rjs via groups.io wrote:
>> Wow i don¡¯t even know what that is¡..??
>
> Hi, Bob:
>
> I think DonP is seeking a link with a
> IN.USA.NOAM BBS.
>
> 73, Chuck
>
>
>
>
>
>
--
Bob
va3rjs
|
Hey, that¡¯s not a problem. We all have a learning curve and get involved with what we like.
I¡¯m looking for someone to share udp 10092 info.
On Wed, May 28, 2025 at 08:16, Bob-va3rjs via groups.io < va3rjs@...> wrote: Oh ok sorry i have not played around with APRS on BPQ¡..
Bob
On May 28, 2025, at 7:50?AM, Don via groups.io <donpjr@...> wrote:
?
I have aprs working pretty well, so far.
It may be the evening before I can share any info, currently at work keeping ¡°the man¡± happy.
On Wed, May 28, 2025 at 07:27, Bob-va3rjs via groups.io <
va3rjs@...> wrote:
Wow i don¡¯t even know what that is¡..??
I have a test node running here at my qth, been trying to get ?axudp working, have 2 rf links that i run every now and then.
I am game to try¡.. just let me know what you need!
Bob
On May 28, 2025, at 7:07?AM, Don via groups.io <donpjr@...> wrote:
?
Good day
?
Looking for an IN station to exchange udp mapping.
?
DonP
--
Bob
va3rjs
--
Bob
va3rjs
|
Yes after i emailed i realized what the IN was ? what can i say Canadian ham with a Canadian mind?
Bob
toggle quoted message
Show quoted text
On May 28, 2025, at 7:51?AM, Chuck Gelm <nc8q-aredn@...> wrote:
?On 5/28/25 07:26, Bob-va3rjs via groups.io wrote:
Wow i don¡¯t even know what that is¡..?? Hi, Bob:
I think DonP is seeking a link with a
IN.USA.NOAM BBS.
73, Chuck
--
Bob
va3rjs
|
Oh ok sorry i have not played around with APRS on BPQ¡..
toggle quoted message
Show quoted text
On May 28, 2025, at 7:50?AM, Don via groups.io <donpjr@...> wrote:
? I have aprs working pretty well, so far.
It may be the evening before I can share any info, currently at work keeping ¡°the man¡± happy.
On Wed, May 28, 2025 at 07:27, Bob-va3rjs via groups.io < va3rjs@...> wrote: Wow i don¡¯t even know what that is¡..??
I have a test node running here at my qth, been trying to get ?axudp working, have 2 rf links that i run every now and then.
I am game to try¡.. just let me know what you need!
Bob
On May 28, 2025, at 7:07?AM, Don via groups.io <donpjr@...> wrote:
?
Good day
?
Looking for an IN station to exchange udp mapping.
?
DonP
--
Bob
va3rjs
|
On 5/28/25 07:26, Bob-va3rjs via groups.io wrote: Wow i don¡¯t even know what that is¡..?? Hi, Bob: I think DonP is seeking a link with a IN.USA.NOAM BBS. 73, Chuck
|
I have aprs working pretty well, so far.
It may be the evening before I can share any info, currently at work keeping ¡°the man¡± happy.
On Wed, May 28, 2025 at 07:27, Bob-va3rjs via groups.io < va3rjs@...> wrote: Wow i don¡¯t even know what that is¡..??
I have a test node running here at my qth, been trying to get ?axudp working, have 2 rf links that i run every now and then.
I am game to try¡.. just let me know what you need!
Bob
On May 28, 2025, at 7:07?AM, Don via groups.io <donpjr@...> wrote:
?
Good day
?
Looking for an IN station to exchange udp mapping.
?
DonP
--
Bob
va3rjs
|
Wow i don¡¯t even know what that is¡..??
I have a test node running here at my qth, been trying to get ?axudp working, have 2 rf links that i run every now and then.
I am game to try¡.. just let me know what you need!
Bob
toggle quoted message
Show quoted text
On May 28, 2025, at 7:07?AM, Don via groups.io <donpjr@...> wrote:
? Good day
?
Looking for an IN station to exchange udp mapping.
?
DonP
|
Good day
?
Looking for an IN station to exchange udp mapping.
?
DonP
|
Re: Bad config record RADIO=1
FYI, it has been said before but RADIO MUST proceed immediately on the line AFTER the ADDR line.
73
|
Re: How to find HA forwarding peer
You got your AXIP to work properly? In March you could only do AXUDP.
toggle quoted message
Show quoted text
On 5/27/2025 6:44 PM, Mark Taylor wrote: Ken,
I am in the Houston area and would gladly provide you with an AXIP connection to get you started while you search for an RF connection.
And I can provide assistance in routing as well.
Email is on my BPQ web pages below.
--
73,
Mark, N5MDT
Montgomery, Texas
<>
--
Charles J. Hargrove - N2NOV
NYC-ARECS/RACES Citywide Radio Officer/Skywarn Coord.
NYC-ARECS/RACES Nets 441.100/136.5 PL
ARnewsline Broadcast Mon. @ 8:00PM
NYC-ARECS Weekly Net Mon. @ 8:30PM
NY-NBEMS Net Saturdays @ 10AM & USeast-NBEMS Net Wednesdays @ 7PM
on 7.036 Mhz USB (alt 3.536)/1500 hz waterfall spot; MFSK-16 or 32
"Information is the oxygen of the modern age. It seeps through the walls topped
by barbed wire, it wafts across the electrified borders." - Ronald Reagan
"The more corrupt the state, the more it legislates." - Tacitus
"Molann an obair an fear" - Irish Saying
(The work praises the man.)
"No matter how big and powerful government gets, and the many services it
provides, it can never take the place of volunteers." - Ronald Reagan
|
Re: How to find HA forwarding peer
Ken,
?
I am in the Houston area and would gladly provide you with an AXIP connection to get you started while you search for an RF connection.
?
And I can provide assistance in routing as well.
?
Email is on my BPQ web pages below.
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
|
Re: Bad config record RADIO=1
toggle quoted message
Show quoted text
Here they are:
PORT
? ?PORTNUM=4? ? ? ? ? ? ? ? ?; Port number
? ?ID=300 Baud HF packet? ?; PORTS command text
? ?TYPE=ASYNC? ? ? ? ? ? ? ? ; RS232 connection
? ?DRIVER=UZ7HO
? ?CHANNEL=A? ? ? ? ? ? ? ? ?; TNC channel
? ?;PORTCALL=CR6MPB
? ?PORTCALL=YU7BPQ
? ?;PORTCALL=3B8YT
? ?;PORTCALL=II1CIT
? ?;PORTCALL=J41MPB
? ?INTERLOCK=1? ? ? ? ? ; Optional - set if you have two ports sharing the
same radio.
? ? ? ? ? ? ? ? ? ? ? ? ; Set the same Interlock value on both ports.
? ?;IPADDR=127.0.0.1? ? ? ? ? ; DIREWOLF
? ?;TCPPORT=8002? ? ? ? ? ? ? ; DIREWOLF
? ?CONFIG
? ?RADIO=1? ? ? <<<<<<<<<<<<<<<<<<<<<<<<<<<<<? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?TAKE OUT =? ?,? SHOULD BE RADIO 1
? ? ADDR 127.0.0.1 8000
? ? MAXSESSIONS=5
? ? UPDATEMAP
? ? BEACONAFTERSESSION
? ?SPEED=19200
? ?MAXFRAME=1? ? ? ? ? ? ? ? ; Max outstanding frames? ? ? ? ? ?by UT1HZM? ? ? ?2
(105NETWORK says 1)
? ?;FRACK=12000? ? ? ? ? ? ? ? ; Level 2 timeout (ms)? ? ? ? ? ?by
UT1HZM? 12-15second (or 12000-15000 if not in seconds) 5000 by 105NET
? ?FRACK=5000? ? ? ? ? ? ? ? ; From his manual? ? ? ? ? ? ? ? ? by VE1AMA
(SK)? ? test Dec 30, 2021
? ?DWAIT=0? ? ? ? ? ? ? ? ? ?; From his manual? ? ? ? ? ? ? ? ? by VE1AMA
(SK)? ? Network105 founder
? ?RESPTIME=2000? ? ? ? ? ? ? ?; Level 2 delayed ACK (ms)? ? ? ?by UT1HZM? ? ? ?2000
(2sec)
? ?RETRIES=10? ? ? ? ? ? ? ? ; Level 2 max retries? ? ? ? ? ? ? by UT1HZM? ? ? ?12 or 15 (?)
? ; PACLEN=236? ? ? ? ? ? ? ? ; Max packet length (bytes)
? ; PACLEN=64? ? ? ? ? ? ? ? ; Max packet length (bytes)? ? ? ? by UT1HZM? ? ? ?64 or 80
? ?PACLEN=100? ? ? ? ? ? ? ? ; Max packet length (bytes)? ? ? ? by UT1HZM? ? ? ?"for
better FEC"
? ; PACLEN=100? ? ? ? ? ? ? ? ; Max packet length (bytes)? ? ? ?by UZ7HO? ? ? ? "for
FX25 in EU"
? ; PACLEN=60? ? ? ? ? ? ? ? ; Max packet length (bytes)? ? ? ? by VE1AMA
(SK)? ? test 30, 2021
? ; TXDELAY=480? ? ? ? ? ? ? ?; Transmit keyup delay (ms)
? ?TXDELAY=300? ? ? ? ? ? ? ?; Transmit keyup delay (ms)? ? ? ? by
UT1HZM? 250-350msec
? ?SLOTTIME=100? ? ? ? ? ? ? ; CMSA interval timer (ms)? ? ? ? ?by UT1HZM? ? ? ?100
? ?TXTAIL=30? ? ? ? ? ? ? ? ? ?;? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? by UT1HZM? ? ? ?30 or 50
? ?PERSIST=90? ? ?; Persistence (256/(# transmissions-1)? ? ? ? by UT1HZM? ? ? ?90
? ?DIGIFLAG=0? ? ? ?; Allow Digipeat on this port
? ; PORTCALL=YT7MPB-9
? ?QUALITY=255? ? ? ; salje nodes listu
? ?;QUALITY=0? ? ? ; nesalje nodes listu
ENDPORT
PORT
? ?PORTNUM=5? ? ? ? ? ? ? ? ?; Port number
? ?ID=300 Baud HF packet? ?; PORTS command text
? ?TYPE=ASYNC? ? ? ? ? ? ? ? ; RS232 connection
? ?DRIVER=UZ7HO
? ?CHANNEL=B? ? ? ? ? ? ? ? ?; TNC channel
? ?;PORTCALL=CR6MPB
? ?PORTCALL=YU7BPQ
? ?;PORTCALL=3B8YT
? ?;PORTCALL=II1CIT
? ?;PORTCALL=J41MPB
? ?INTERLOCK=1? ? ? ? ? ; Optional - set if you have two ports sharing the
same radio.
? ? ? ? ? ? ? ? ? ? ? ? ; Set the same Interlock value on both ports.
? ?;IPADDR=127.0.0.1? ? ? ? ? ; DIREWOLF
? ?;TCPPORT=8002? ? ? ? ? ? ? ; DIREWOLF
? ?CONFIG
? ?RADIO=1
? ? ADDR 127.0.0.1 8000
? ? MAXSESSIONS=5
? ? UPDATEMAP
? ? BEACONAFTERSESSION
? ?SPEED=19200
? ?MAXFRAME=1? ? ? ? ? ? ? ? ; Max outstanding frames? ? ? ? ? ?by UT1HZM? ? ? ?2
(105NETWORK says 1)
? ?;FRACK=12000? ? ? ? ? ? ? ? ; Level 2 timeout (ms)? ? ? ? ? ?by
UT1HZM? 12-15second (or 12000-15000 if not in seconds) 5000 by 105NET
? ?FRACK=5000? ? ? ? ? ? ? ? ; From his manual? ? ? ? ? ? ? ? ? by VE1AMA
(SK)? ? test Dec 30, 2021
? ?DWAIT=0? ? ? ? ? ? ? ? ? ?; From his manual? ? ? ? ? ? ? ? ? by VE1AMA
(SK)? ? Network105 founder
? ?RESPTIME=2000? ? ? ? ? ? ? ?; Level 2 delayed ACK (ms)? ? ? ?by UT1HZM? ? ? ?2000
(2sec)
? ?RETRIES=10? ? ? ? ? ? ? ? ; Level 2 max retries? ? ? ? ? ? ? by UT1HZM? ? ? ?12 or 15 (?)
? ; PACLEN=236? ? ? ? ? ? ? ? ; Max packet length (bytes)
? ; PACLEN=64? ? ? ? ? ? ? ? ; Max packet length (bytes)? ? ? ? by UT1HZM? ? ? ?64 or 80
? ; PACLEN=100? ? ? ? ? ? ? ? ; Max packet length (bytes)? ? ? ?by UT1HZM? ? ? ?"for
better FEC"
? ?PACLEN=100? ? ? ? ? ? ? ? ; Max packet length (bytes)? ? ? ? by UZ7HO? ? ? ? "for
FX25 in EU"
? ; PACLEN=60? ? ? ? ? ? ? ? ; Max packet length (bytes)? ? ? ? by VE1AMA
(SK)? ? test 30, 2021
? ; TXDELAY=480? ? ? ? ? ? ? ?; Transmit keyup delay (ms)
? ?TXDELAY=300? ? ? ? ? ? ? ?; Transmit keyup delay (ms)? ? ? ? by
UT1HZM? 250-350msec
? ?SLOTTIME=100? ? ? ? ? ? ? ; CMSA interval timer (ms)? ? ? ? ?by UT1HZM? ? ? ?100
? ?TXTAIL=30? ? ? ? ? ? ? ? ? ?;? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? by UT1HZM? ? ? ?30 or 50
? ?PERSIST=90? ? ?; Persistence (256/(# transmissions-1)? ? ? ? by UT1HZM? ? ? ?90
? ?DIGIFLAG=0? ? ? ?; Allow Digipeat on this port
? ; PORTCALL=YT7MPB-9
? ?QUALITY=255? ? ? ; salje nodes listu
? ?;QUALITY=0? ? ? ; nesalje nodes listu
ENDPORT
> Can you post the port definitions for port 4 and 5?
>
> Thanks,
> John
>
>
> On 27/05/2025 15:26, Misko YT7MPB via wrote:
>> John,
>>
>> I just upgraded linbpq from version 6.0.24.65 to version 6.0.24.71 and
>> noticed an error (see the Subject):
>>
>> Initialising Port 01? ? ?Telnet Server
>> Initialising Port 02? ? ?SCS Pactor /dev/ttyUSB1
>> Initialising Port 03? ? ?TCPKISS IP 127.0.0.1 Port 8001 Chan A
>> Initialising Port 04
>> Bad config record RADIO=1
>> UZ7HO Host 127.0.0.1 Port 8000 Chan A
>> Initialising Port 05
>> Bad config record RADIO=1
>> UZ7HO Host 127.0.0.1 Port 8000 Chan B
>> Initialising Port 06? ? ?KAM Pactor /dev/ttyUSB3
>>
>>
>> That did not appear in version :
>>
>> Initialising Port 01? ? ?Telnet Server
>> Initialising Port 02? ? ?SCS Pactor /dev/ttyUSB1
>> Initialising Port 03? ? ?TCPKISS IP 127.0.0.1 Port 8001 Chan A
>> Initialising Port 04
>> UZ7HO Host 127.0.0.1 Port 8000 Chan A
>> Initialising Port 05
>> UZ7HO Host 127.0.0.1 Port 8000 Chan B
>> Initialising Port 06? ? ?KAM Pactor /dev/ttyUSB3
>>
>>
>> Misko YT7MPB
>>
>>
>>
>>
>>
>
>
>
>
>
>
>
|
Re: Bad config record RADIO=1
Misco,
The first line of the CONFIG section has to be the ADDR line.
73,
John
toggle quoted message
Show quoted text
On 27/05/2025 17:42, Misko YT7MPB via groups.io wrote: Here they are:
PORT
PORTNUM=4 ; Port number
ID=300 Baud HF packet ; PORTS command text
TYPE=ASYNC ; RS232 connection
DRIVER=UZ7HO
CHANNEL=A ; TNC channel
;PORTCALL=CR6MPB
PORTCALL=YU7BPQ
;PORTCALL=3B8YT
;PORTCALL=II1CIT
;PORTCALL=J41MPB
INTERLOCK=1 ; Optional - set if you have two ports sharing the
same radio.
; Set the same Interlock value on both ports.
;IPADDR=127.0.0.1 ; DIREWOLF
;TCPPORT=8002 ; DIREWOLF
CONFIG
RADIO=1
ADDR 127.0.0.1 8000
MAXSESSIONS=5
UPDATEMAP
BEACONAFTERSESSION
SPEED=19200
MAXFRAME=1 ; Max outstanding frames by UT1HZM 2
(105NETWORK says 1)
;FRACK=12000 ; Level 2 timeout (ms) by
UT1HZM 12-15second (or 12000-15000 if not in seconds) 5000 by 105NET
FRACK=5000 ; From his manual by VE1AMA
(SK) test Dec 30, 2021
DWAIT=0 ; From his manual by VE1AMA
(SK) Network105 founder
RESPTIME=2000 ; Level 2 delayed ACK (ms) by UT1HZM 2000
(2sec)
RETRIES=10 ; Level 2 max retries by UT1HZM 12 or 15 (?)
; PACLEN=236 ; Max packet length (bytes)
; PACLEN=64 ; Max packet length (bytes) by UT1HZM 64 or 80
PACLEN=100 ; Max packet length (bytes) by UT1HZM "for
better FEC"
; PACLEN=100 ; Max packet length (bytes) by UZ7HO "for
FX25 in EU"
; PACLEN=60 ; Max packet length (bytes) by VE1AMA
(SK) test 30, 2021
; TXDELAY=480 ; Transmit keyup delay (ms)
TXDELAY=300 ; Transmit keyup delay (ms) by
UT1HZM 250-350msec
SLOTTIME=100 ; CMSA interval timer (ms) by UT1HZM 100
TXTAIL=30 ; by UT1HZM 30 or 50
PERSIST=90 ; Persistence (256/(# transmissions-1) by UT1HZM 90
DIGIFLAG=0 ; Allow Digipeat on this port
; PORTCALL=YT7MPB-9
QUALITY=255 ; salje nodes listu
;QUALITY=0 ; nesalje nodes listu
ENDPORT
PORT
PORTNUM=5 ; Port number
ID=300 Baud HF packet ; PORTS command text
TYPE=ASYNC ; RS232 connection
DRIVER=UZ7HO
CHANNEL=B ; TNC channel
;PORTCALL=CR6MPB
PORTCALL=YU7BPQ
;PORTCALL=3B8YT
;PORTCALL=II1CIT
;PORTCALL=J41MPB
INTERLOCK=1 ; Optional - set if you have two ports sharing the
same radio.
; Set the same Interlock value on both ports.
;IPADDR=127.0.0.1 ; DIREWOLF
;TCPPORT=8002 ; DIREWOLF
CONFIG
RADIO=1
ADDR 127.0.0.1 8000
MAXSESSIONS=5
UPDATEMAP
BEACONAFTERSESSION
SPEED=19200
MAXFRAME=1 ; Max outstanding frames by UT1HZM 2
(105NETWORK says 1)
;FRACK=12000 ; Level 2 timeout (ms) by
UT1HZM 12-15second (or 12000-15000 if not in seconds) 5000 by 105NET
FRACK=5000 ; From his manual by VE1AMA
(SK) test Dec 30, 2021
DWAIT=0 ; From his manual by VE1AMA
(SK) Network105 founder
RESPTIME=2000 ; Level 2 delayed ACK (ms) by UT1HZM 2000
(2sec)
RETRIES=10 ; Level 2 max retries by UT1HZM 12 or 15 (?)
; PACLEN=236 ; Max packet length (bytes)
; PACLEN=64 ; Max packet length (bytes) by UT1HZM 64 or 80
; PACLEN=100 ; Max packet length (bytes) by UT1HZM "for
better FEC"
PACLEN=100 ; Max packet length (bytes) by UZ7HO "for
FX25 in EU"
; PACLEN=60 ; Max packet length (bytes) by VE1AMA
(SK) test 30, 2021
; TXDELAY=480 ; Transmit keyup delay (ms)
TXDELAY=300 ; Transmit keyup delay (ms) by
UT1HZM 250-350msec
SLOTTIME=100 ; CMSA interval timer (ms) by UT1HZM 100
TXTAIL=30 ; by UT1HZM 30 or 50
PERSIST=90 ; Persistence (256/(# transmissions-1) by UT1HZM 90
DIGIFLAG=0 ; Allow Digipeat on this port
; PORTCALL=YT7MPB-9
QUALITY=255 ; salje nodes listu
;QUALITY=0 ; nesalje nodes listu
ENDPORT
Can you post the port definitions for port 4 and 5?
Thanks,
John
On 27/05/2025 15:26, Misko YT7MPB via groups.io wrote:
John,
I just upgraded linbpq from version 6.0.24.65 to version 6.0.24.71 and
noticed an error (see the Subject):
Initialising Port 01 Telnet Server
Initialising Port 02 SCS Pactor /dev/ttyUSB1
Initialising Port 03 TCPKISS IP 127.0.0.1 Port 8001 Chan A
Initialising Port 04
Bad config record RADIO=1
UZ7HO Host 127.0.0.1 Port 8000 Chan A
Initialising Port 05
Bad config record RADIO=1
UZ7HO Host 127.0.0.1 Port 8000 Chan B
Initialising Port 06 KAM Pactor /dev/ttyUSB3
That did not appear in version 6.0.24.65:
Initialising Port 01 Telnet Server
Initialising Port 02 SCS Pactor /dev/ttyUSB1
Initialising Port 03 TCPKISS IP 127.0.0.1 Port 8001 Chan A
Initialising Port 04
UZ7HO Host 127.0.0.1 Port 8000 Chan A
Initialising Port 05
UZ7HO Host 127.0.0.1 Port 8000 Chan B
Initialising Port 06 KAM Pactor /dev/ttyUSB3
Misko YT7MPB
|
How to find HA forwarding peer
Hi Gang!
?
I am running my LinBPQ BBS on 145.050 out in Greenville Tx (~50 miles Northeast of DFW).? I don't have any other packet stations near me. I can usually connect to N5COR-10 on 145.050 and I guess I could hear other stations if I changed frequency.? I have a 3 element yagi that I am going to mount on the tower soon, so I am fairly sure I'll be able to reliably reach into the big city.
?
My question is: how do I find a peer willing to accept and forward messages?? Is there a way to reach out to the sysop that I don't know about?? I'm sure once I find my forwarder I'll have more questions,? is there a "setting up HA forwarding for dummies" document somewhere?
?
Thanks and 73
Ken AC0TG
|
Got it.
?
On the HTML menu page.
?
Terminal?
?
LISTEN <portnum>
|
Re: Bad config record RADIO=1
Here they are:
PORT
PORTNUM=4 ; Port number
ID=300 Baud HF packet ; PORTS command text
TYPE=ASYNC ; RS232 connection
DRIVER=UZ7HO
CHANNEL=A ; TNC channel
;PORTCALL=CR6MPB
PORTCALL=YU7BPQ
;PORTCALL=3B8YT
;PORTCALL=II1CIT
;PORTCALL=J41MPB
INTERLOCK=1 ; Optional - set if you have two ports sharing the
same radio.
; Set the same Interlock value on both ports.
;IPADDR=127.0.0.1 ; DIREWOLF
;TCPPORT=8002 ; DIREWOLF
CONFIG
RADIO=1
ADDR 127.0.0.1 8000
MAXSESSIONS=5
UPDATEMAP
BEACONAFTERSESSION
SPEED=19200
MAXFRAME=1 ; Max outstanding frames by UT1HZM 2
(105NETWORK says 1)
;FRACK=12000 ; Level 2 timeout (ms) by
UT1HZM 12-15second (or 12000-15000 if not in seconds) 5000 by 105NET
FRACK=5000 ; From his manual by VE1AMA
(SK) test Dec 30, 2021
DWAIT=0 ; From his manual by VE1AMA
(SK) Network105 founder
RESPTIME=2000 ; Level 2 delayed ACK (ms) by UT1HZM 2000
(2sec)
RETRIES=10 ; Level 2 max retries by UT1HZM 12 or 15 (?)
; PACLEN=236 ; Max packet length (bytes)
; PACLEN=64 ; Max packet length (bytes) by UT1HZM 64 or 80
PACLEN=100 ; Max packet length (bytes) by UT1HZM "for
better FEC"
; PACLEN=100 ; Max packet length (bytes) by UZ7HO "for
FX25 in EU"
; PACLEN=60 ; Max packet length (bytes) by VE1AMA
(SK) test 30, 2021
; TXDELAY=480 ; Transmit keyup delay (ms)
TXDELAY=300 ; Transmit keyup delay (ms) by
UT1HZM 250-350msec
SLOTTIME=100 ; CMSA interval timer (ms) by UT1HZM 100
TXTAIL=30 ; by UT1HZM 30 or 50
PERSIST=90 ; Persistence (256/(# transmissions-1) by UT1HZM 90
DIGIFLAG=0 ; Allow Digipeat on this port
; PORTCALL=YT7MPB-9
QUALITY=255 ; salje nodes listu
;QUALITY=0 ; nesalje nodes listu
ENDPORT
PORT
PORTNUM=5 ; Port number
ID=300 Baud HF packet ; PORTS command text
TYPE=ASYNC ; RS232 connection
DRIVER=UZ7HO
CHANNEL=B ; TNC channel
;PORTCALL=CR6MPB
PORTCALL=YU7BPQ
;PORTCALL=3B8YT
;PORTCALL=II1CIT
;PORTCALL=J41MPB
INTERLOCK=1 ; Optional - set if you have two ports sharing the
same radio.
; Set the same Interlock value on both ports.
;IPADDR=127.0.0.1 ; DIREWOLF
;TCPPORT=8002 ; DIREWOLF
CONFIG
RADIO=1
ADDR 127.0.0.1 8000
MAXSESSIONS=5
UPDATEMAP
BEACONAFTERSESSION
SPEED=19200
MAXFRAME=1 ; Max outstanding frames by UT1HZM 2
(105NETWORK says 1)
;FRACK=12000 ; Level 2 timeout (ms) by
UT1HZM 12-15second (or 12000-15000 if not in seconds) 5000 by 105NET
FRACK=5000 ; From his manual by VE1AMA
(SK) test Dec 30, 2021
DWAIT=0 ; From his manual by VE1AMA
(SK) Network105 founder
RESPTIME=2000 ; Level 2 delayed ACK (ms) by UT1HZM 2000
(2sec)
RETRIES=10 ; Level 2 max retries by UT1HZM 12 or 15 (?)
; PACLEN=236 ; Max packet length (bytes)
; PACLEN=64 ; Max packet length (bytes) by UT1HZM 64 or 80
; PACLEN=100 ; Max packet length (bytes) by UT1HZM "for
better FEC"
PACLEN=100 ; Max packet length (bytes) by UZ7HO "for
FX25 in EU"
; PACLEN=60 ; Max packet length (bytes) by VE1AMA
(SK) test 30, 2021
; TXDELAY=480 ; Transmit keyup delay (ms)
TXDELAY=300 ; Transmit keyup delay (ms) by
UT1HZM 250-350msec
SLOTTIME=100 ; CMSA interval timer (ms) by UT1HZM 100
TXTAIL=30 ; by UT1HZM 30 or 50
PERSIST=90 ; Persistence (256/(# transmissions-1) by UT1HZM 90
DIGIFLAG=0 ; Allow Digipeat on this port
; PORTCALL=YT7MPB-9
QUALITY=255 ; salje nodes listu
;QUALITY=0 ; nesalje nodes listu
ENDPORT
toggle quoted message
Show quoted text
Can you post the port definitions for port 4 and 5?
Thanks,
John
On 27/05/2025 15:26, Misko YT7MPB via groups.io wrote:
John,
I just upgraded linbpq from version 6.0.24.65 to version 6.0.24.71 and
noticed an error (see the Subject):
Initialising Port 01 Telnet Server
Initialising Port 02 SCS Pactor /dev/ttyUSB1
Initialising Port 03 TCPKISS IP 127.0.0.1 Port 8001 Chan A
Initialising Port 04
Bad config record RADIO=1
UZ7HO Host 127.0.0.1 Port 8000 Chan A
Initialising Port 05
Bad config record RADIO=1
UZ7HO Host 127.0.0.1 Port 8000 Chan B
Initialising Port 06 KAM Pactor /dev/ttyUSB3
That did not appear in version 6.0.24.65:
Initialising Port 01 Telnet Server
Initialising Port 02 SCS Pactor /dev/ttyUSB1
Initialising Port 03 TCPKISS IP 127.0.0.1 Port 8001 Chan A
Initialising Port 04
UZ7HO Host 127.0.0.1 Port 8000 Chan A
Initialising Port 05
UZ7HO Host 127.0.0.1 Port 8000 Chan B
Initialising Port 06 KAM Pactor /dev/ttyUSB3
Misko YT7MPB
|
Re: FILE-import not working correctly for WL2K
#bbs
John,
?
also thanks to you for replying! This is the log:
?
250527 15:57:56 >IMPORT ? ?SP rms:rec.eiver @ doma.in < call@...
250527 15:57:56 >IMPORT ? ?OK
250527 15:57:56 ?IMPORT ? ?Msg 14993 Routing Trace To RMS Via rec.eiver
250527 15:57:56 ?IMPORT ? ?Routing Trace to RMS Matches BBS RMS
250527 15:57:56 >IMPORT ? ?>
250527 15:57:56 | ? ? ? ? ?Imported 1 Message(s) from IMPORT/pbx-import.txt
[... mail is handed over to the RMS without the domain-part...]
?
?
250527 16:01:42 >IMPORT ? ?SP rms:rec.eiver @doma.in < call@...
250527 16:01:42 >IMPORT ? ?*** Error: Invalid Format
250527 16:01:42 | ? ? ? ? ?Imported 0 Message(s) from IMPORT/pbx-import.txt
[...]
?
?
?
250527 16:03:02 >IMPORT ? ?SP rms:rec.eiver@ doma.in < call@...
250527 16:03:02 >IMPORT ? ?*** Error: Invalid Format
250527 16:03:02 | ? ? ? ? ?Imported 0 Message(s) from IMPORT/pbx-import.txt
?
73 - Jochen
|
Don
Ray Adkins
Ken AC0TG