¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Bpq32
  2. Messages
Expanded Topics Messages
Date
Re: howto send from winlink express to BPQmail using telnet on a local host

 

¿ªÔÆÌåÓý

now i need a way to remove the
@winlink.org?

since what needed was a way to post
from winlink to boqmail as if the
the message was sourced on the bbs
but it seems it is getting tougher

didnt want to setup a low power winlink express hf user and connect to the?
bpqmail

these users are not hams but rather shares users

Rob

On Mar 7, 2025, at 5:44?AM, Robert Cartier via groups.io <kd1jg@...> wrote:

?Thank you John


On Mar 7, 2025, at 4:05?AM, John G8BPQ via groups.io <john.wiseman@...> wrote:

? In Telnet Server config set

RELAYAPPL=BBS

This will cause BPQ to listen on port 8772 and pass connections to the BBS.

73,
John


On 07/03/2025 02:36, Robert Cartier via groups.io wrote:
I am trying to work out a way to send from ?winlink express to bpqmail thru telnet on the localhost
I need to generate outgoing messages to a group and winlink express seems to handle this the best from what I can see
SO with that being said instead ?
?
I saw on winlink express under telnet session - settings there is a way to use the local machine as a RMS Relay. So I am assuming
that I need to set CMS=1 on the BPQ32.cfg port definition but beyond that I am lost and dont see where to establish the rms relay?
to listen on 8772
?
I could also be all wet and not understanding the pipe
?
any guidance is welcome?
?
?
Rob
Re: howto send from winlink express to BPQmail using telnet on a local host

 

¿ªÔÆÌåÓý

Thank you John


On Mar 7, 2025, at 4:05?AM, John G8BPQ via groups.io <john.wiseman@...> wrote:

? In Telnet Server config set

RELAYAPPL=BBS

This will cause BPQ to listen on port 8772 and pass connections to the BBS.

73,
John


On 07/03/2025 02:36, Robert Cartier via groups.io wrote:
I am trying to work out a way to send from ?winlink express to bpqmail thru telnet on the localhost
I need to generate outgoing messages to a group and winlink express seems to handle this the best from what I can see
SO with that being said instead ?
?
I saw on winlink express under telnet session - settings there is a way to use the local machine as a RMS Relay. So I am assuming
that I need to set CMS=1 on the BPQ32.cfg port definition but beyond that I am lost and dont see where to establish the rms relay?
to listen on 8772
?
I could also be all wet and not understanding the pipe
?
any guidance is welcome?
?
?
Rob
Re: howto send from winlink express to BPQmail using telnet on a local host

 

¿ªÔÆÌåÓý

In Telnet Server config set

RELAYAPPL=BBS

This will cause BPQ to listen on port 8772 and pass connections to the BBS.

73,
John


On 07/03/2025 02:36, Robert Cartier via groups.io wrote:

I am trying to work out a way to send from ?winlink express to bpqmail thru telnet on the localhost
I need to generate outgoing messages to a group and winlink express seems to handle this the best from what I can see
SO with that being said instead ?
?
I saw on winlink express under telnet session - settings there is a way to use the local machine as a RMS Relay. So I am assuming
that I need to set CMS=1 on the BPQ32.cfg port definition but beyond that I am lost and dont see where to establish the rms relay?
to listen on 8772
?
I could also be all wet and not understanding the pipe
?
any guidance is welcome?
?
?
Rob
Re: Need to reset frequency on radio after forwarding

 

¿ªÔÆÌåÓý

You can specify a Disconnect Script for a port. If you need more than one command seperate them with |

DisconnectScript=RADIO 5 14.103 USB

It goes in the CONFIG section of a PORT config.

73, John

On 07/03/2025 00:23, Dave Christensen via groups.io wrote:

I manually pickup messages from an area DTN hub using BPQMail and would like to go back to a set frequency after forwarding so they can find me when sending traffic to me.? I saw a reference to the parameter DefaultRXFrequency xx.xxx but no reference if this still works or where to put it the port config file.? Can someone help me reset my radio after forwarding to a set frequency?
?
Thanks
Dave - KD7UM
howto send from winlink express to BPQmail using telnet on a local host

 

I am trying to work out a way to send from ?winlink express to bpqmail thru telnet on the localhost
I need to generate outgoing messages to a group and winlink express seems to handle this the best from what I can see
SO with that being said instead ?
?
I saw on winlink express under telnet session - settings there is a way to use the local machine as a RMS Relay. So I am assuming
that I need to set CMS=1 on the BPQ32.cfg port definition but beyond that I am lost and dont see where to establish the rms relay?
to listen on 8772
?
I could also be all wet and not understanding the pipe
?
any guidance is welcome?
?
?
Rob
Re: how to post a bulletin to the BBS and have it be rewritten to a list

 

¿ªÔÆÌåÓý

Correct they are on vara in a closed HF environment using winlink express to connect to bpqmail?
I tested and can originate from a group list from Winink and post to the bbs
but I was hoping I can do something like that from within bpqmail without having to?
use an external feed

Thanks


On Mar 6, 2025, at 17:34, Eric H. Christensen via groups.io <wg3k@...> wrote:

Just to clarify, you want to send a message to a group of people that are NOT on the packet network, correct?

73,
Eric WG3K
FM18rp
Packet: WG3K@WG3K.#SMD.MD.USA.NOAM
E-Mail: wg3k@...







Robert Cartier
kd1jg@...
Re: how to post a bulletin to the BBS and have it be rewritten to a list

 

On 3/6/25 13:05, Robert Cartier via groups.io wrote:
I was curious if there is a way that I can have a message posted to the BBS and have it rewritten so I can
send out ?a ?defined list of rms express users individually.
I was looking thru the system and havent come across a rewrite window i will continue to look
The system is currently a closed system and not out on the public network so I am not too concerned
for outside users flooding my user community
Thanks in advance
Hi, Robert:

Put semi-colons between addressees in the address field.
e.g. SB or SP to:
w1abc@...;w2cde@w2cde;w3fgh@...;nc8q@nc8q.#day.oh.usa.noam;WG3K@WG3K.#SMD.MD.USA.NOAM;w4ijk@...


I think.

73, Chuck
Need to reset frequency on radio after forwarding

 

I manually pickup messages from an area DTN hub using BPQMail and would like to go back to a set frequency after forwarding so they can find me when sending traffic to me.? I saw a reference to the parameter DefaultRXFrequency xx.xxx but no reference if this still works or where to put it the port config file.? Can someone help me reset my radio after forwarding to a set frequency?
?
Thanks
Dave - KD7UM
Re: how to post a bulletin to the BBS and have it be rewritten to a list

 

Just to clarify, you want to send a message to a group of people that are NOT on the packet network, correct?

73,
Eric WG3K
FM18rp
Packet: WG3K@WG3K.#SMD.MD.USA.NOAM
E-Mail: wg3k@...
Re: how to post a bulletin to the BBS and have it be rewritten to a list

 

¿ªÔÆÌåÓý

If not what would be the best way to post a message to multiple recipients from a defined list

Or generate a message from winlink express from a group of addresses and ?post it and let bpqmail process it

Just trying to find a way of making it easier?

Thanks


On Mar 6, 2025, at 1:05?PM, Robert Cartier via groups.io <kd1jg@...> wrote:

?
I was curious if there is a way that I can have a message posted to the BBS and have it rewritten so I can?
send out ?a ?defined list of rms express users individually.
?
I was looking thru the system and havent come across a rewrite window i will continue to look
?
The system is currently a closed system and not out on the public network so I am not too concerned
for outside users flooding my user community
?
Thanks in advance
?
?
Re: Need Advice: RF Only Forwarding

 

¿ªÔÆÌåÓý

Hi Jan,
I wasn't aware that the 9612 had DAMA. On the east coast, we have a group that uses PC/FlexNet and Flexnet32 although they don't seem to take advantage of DAMA master/slave.

This project is a dedicated one-hop link. I appreciate the info and will look into that.

73 de Chris
ww2bsa


-------- Original message --------
From: "Jan PA3GJX via groups.io" <jancats60@...>
Date: 3/6/25 11:31 AM (GMT-05:00)
Subject: Re: [bpq32] Need Advice: RF Only Forwarding

Hello,?
If you are using a station which over sees other? not seeing each other you make it a DAMA master. This master accepts stations and leaves a space for other connecting stations. This is to prevent someone aiming a beam with high power and tight AX25 parameters.?
?
Netrom is a horrible routing protocol and produces a massive data overhead which gives lower throughput.?
?
If you want to send data from one node to the other in a dedicated link use digipeat. And broadcast in the beacon from the DAMA master? digipeater the reachable access nodes.?
?
KPC9612 has DAMA capabilities.?
?
https://www.google.com/url?sa=t&source=web&rct=j&opi=89978449&url=http://www.tapr.net/meetings/DCC_1995/DCC1995-DAMA-WK5M.pdf&ved=2ahUKEwjz0cX47fWLAxVi_7sIHUCFNVAQFnoECGoQAQ&usg=AOvVaw1DybA3vgPPKEpYBBRiVCzA
?
?
?
how to post a bulletin to the BBS and have it be rewritten to a list

 

I was curious if there is a way that I can have a message posted to the BBS and have it rewritten so I can?
send out ?a ?defined list of rms express users individually.
?
I was looking thru the system and havent come across a rewrite window i will continue to look
?
The system is currently a closed system and not out on the public network so I am not too concerned
for outside users flooding my user community
?
Thanks in advance
?
?
Re: Mail odd behavior

 

I always have something strange, or try to do something strange that works differently.? Now my HF forwarding works fine when manually started but only two of the stations follow the intervals.? The other three will only connect when I trigger the forwarding manually.? Go figure...
?
Thanks John.? It may work itself out after a few updates or a new full installer.? It's not causing any grief as there are multiple ways to do it.
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
Re: Need Advice: RF Only Forwarding

 

Hello,?
If you are using a station which over sees other? not seeing each other you make it a DAMA master. This master accepts stations and leaves a space for other connecting stations. This is to prevent someone aiming a beam with high power and tight AX25 parameters.?
?
Netrom is a horrible routing protocol and produces a massive data overhead which gives lower throughput.?
?
If you want to send data from one node to the other in a dedicated link use digipeat. And broadcast in the beacon from the DAMA master? digipeater the reachable access nodes.?
?
KPC9612 has DAMA capabilities.?
?
https://www.google.com/url?sa=t&source=web&rct=j&opi=89978449&url=http://www.tapr.net/meetings/DCC_1995/DCC1995-DAMA-WK5M.pdf&ved=2ahUKEwjz0cX47fWLAxVi_7sIHUCFNVAQFnoECGoQAQ&usg=AOvVaw1DybA3vgPPKEpYBBRiVCzA
?
?
?
Re: Mail odd behavior

 

¿ªÔÆÌåÓý

Mark
??? This is working here. I used BPQTerminal? and the terminal in the console window.
Both were able to receive responses from the bbs.
?I am using BPQ32 6.0.24.65.

On 3/5/2025 9:19 AM, Mark Taylor wrote:

This morning I accessed BPQ Mail from a terminal window on the bpq host machine. Windows 10.? BPQ32 6.0.24.64 and BPQMail 6.0.24.62? (these were distributed together.)
?
Anything that I enter (LM, L, name, homebbs, anything) returns nothing to the terminal.? I can see that it connects to the BBS on the mail app, and the queue value goes to what looks to be accurate.? But nothing on the screen.
?
Accessing WebMail in a browser works normal.
Accessing the BBS from a browser terminal acts normal.
Accessing the BBS from another machin using telnet works normally.
The logs show exactly what the terminal does. No output to the terminal when accessed with a terminal window on the local machine.
?
I looked for all occurrances of my base call sign in my config. I do have a couple and commented them out.? Restarted and the same happens.
Forwarding is happening normally.
Recieving mail is happening normally.
?
Anyone else have this happen to them?? I probably have not accessed the BBS like this for months so have no clue when it started.? So many changes to the config file since I accessed the mail from a termina... Just not sure if this is isolated to my fat finguring the config file somewhere or if others have seen this.? Quite frankly, I don't even know where to start looking.
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
Re: BPQ Kiss AX25 Bridge Testing

 

Hi John,

After some additional testing I would say unless you are really curious do not spend any time on this. The bridge itself is switching packets between the two RF ports as quickly as it can which unless I misunderstand the intent of implementing this for AX25 is exactly what a bridge should do. It is up to the "things" on either side of the bridge to synchronize and / or handle timing.

So far my tests bridging 10m HF 1200b soundcard s/w TNC's to / from 70cm FM 1200b h/w TNC's have all resulted in some amount of retries even after varying the usual timing parameters (SLOTTIME, PERSIST, FRACK) through a wide range. I may have missed setting these in the best combination for the equipment used but either way the bridging does work well enough if needed as long as there is not a sustained large amount of data to bridge.

Thanks for offering to have a look though.

73 de Rich WA3WLH

On 3/4/25 19:07, Rich Sahlender via groups.io wrote:
There is no urgent need for this it is just me playing so whenever you get around to it is fine. I'll keep experimenting in the meantime. Thanks John.

73 de Rich WA3WLH

On 3/4/25 15:32, John G8BPQ via groups.io wrote:
Ok, Thanks.

I'll be away for a few days but will look at it what I get back.

73, John

On 04/03/2025 18:23, Rich Sahlender via groups.io wrote:
PS... I completely forgot that when using QTT in tabbed mode while connected with a bpq node via an FBB port the RF ports do not appear as an option for monitoring until AFTER the initial monitor tab connect... so if it helps the attached zip is take2 showing both RF ports monitored simultaneously within the same monitor tab.

On 3/4/25 11:33, Rich Sahlender via groups.io wrote:
Back at it... the attached zip includes the following files.

70cm-between-bridge-and-wlh7.txt - using linbpq status command to demonstrate good packet timing between the linbpq bridge system 70cm port and my primary home QTH node. Note that since my previous post I loaned the Signalink I was using on the bridge system 70cm port and had to replace with an old h/w pre-MFJ TNCX but the timing still looks good. Note also FWIW that the -7 node uses a KPC3+ on its 70cm port.

10m-between-client-and-bridge.txt - using linbpq status command to demonstrate good packet timing between the 10m client QTT and QTSM with an IC705 and the -13 linbpq bridge system using QTSM and a FT817.

10m-qtsm-bridged-to-wlh7.txt - the 10m client QTSM view of a linbpq status while bridged to my home node.

bridgenode-10m-listen.txt - a bpq listen view of the bridge nodes 10m port while bridge is active.

bridgenode-70cm-listen.txt - a bpq listen view of the bridge nodes 70cm port while bridge is active.

Let me know what else might help if needed.

Tnx es 73 de Rich WA3WLH
Re: TCPIP over AX.25

 

After starting linbpq i ran this commands and then it works
?
sudo ip route add 192.168.0.114 dev LinBPQTAB? ? (on sg0yos)
and
sudo ip route add 192.168.5.1 dev LinBPQTAB? ? ? ? ?(on se0yos)
?
Probably wrong way to do it but couldn't run these commands
in the IPGATEWAY configuration.
?
/Thomas
Re: HF Forwarding partners needed

 

AA5AF you are right thanks for the reminder
Robby

On Mar 5, 2025, at 10:54?AM, Rich Sahlender via groups.io <wa3wlh@...> wrote:

Hello Robby,

Tough to find you at WL2K without providing your call.

73 de Rich WA3WLH
Re: HF Forwarding partners needed

 

Hello Robby,

Tough to find you at WL2K without providing your call.

73 de Rich WA3WLH
Re: Mail odd behavior

 

Edit to add that the BPQ Console window in the BPQMail application works normally.
?
Just when a new terminal window is opened from the BPQ32 Console MDI and the BBS is accessed from there does this happen.
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
521 - 540 of 43653