¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Bpq32
  2. Messages
Expanded Topics Messages
Date
Re: Winlink Gateway question

 

Ok. My Winlink account is PY1XTA and my CMSCALL is PY1XTA-10. This is my application line:

APPLICATION 3,RMS,C 5 CMS,PY1XTA-10,XTARMS,255

All Winlink connections works fine. Really don't understand the dll error msg.

Em qui., 26 de dez. de 2024, 18:23, Mark Taylor via <mtaylor=[email protected]> escreveu:

The CMSCALL should probably not have a SSID.? It normally is your base call but depends on how you registered at .? When you log into your account at do you use just your call or do you use your call+ssid? How do you log into your account?
?
If your Application line for your RMS application gives the call as PY1XTA-10? you do not have to use PY1XTA-10 as the account at ,? your account could be just PY1XTA.
?
I would not have RELAYAPPL=RMS while trying to trougleshoot this.
Comment out the line for now. If you find that you really do need it you can remove the comment.? How this works depends on your Application lines.
?
It might help to see all of your application lines.
?
?
?
Winlink Express has nothing to do with how your Gateway works in BPQ. Nothing to do there.
?
?
?
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
Re: Winlink Gateway question

 

The CMSCALL should probably not have a SSID.? It normally is your base call but depends on how you registered at winlink.org.? When you log into your account at winlink.org do you use just your call or do you use your call+ssid? How do you log into your account?
?
If your Application line for your RMS application gives the call as PY1XTA-10? you do not have to use PY1XTA-10 as the account at winlink.org,? your account could be just PY1XTA.
?
I would not have RELAYAPPL=RMS while trying to trougleshoot this.
Comment out the line for now. If you find that you really do need it you can remove the comment.? How this works depends on your Application lines.
?
It might help to see all of your application lines.
?
?
?
Winlink Express has nothing to do with how your Gateway works in BPQ. Nothing to do there.
?
?
?
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
Re: Winlink Gateway question

 

On 12/26/24 15:15, Mauro Veiga via groups.io wrote:
Hello Chuck.?It made no difference. Do I need to add PY1XTA-10 as Auxiliary Callsign in Winlink Express?
"Do I need to add PY1XTA-10 as Auxiliary Callsign in Winlink Express?"

Hi, Mauro:

I have no clue.
I do not use Winlink Express?.
I do not use Windows?.

All:

Will anyone else answer Mauro's question?

73, Chuck
Re: Winlink Gateway question

 

Hello Chuck.?It made no difference. Do I need to add PY1XTA-10 as Auxiliary Callsign in Winlink Express?

Em qui., 26 de dez. de 2024, 16:09, Chuck Gelm via <nc8q-aredn=[email protected]> escreveu:

On 12/26/24 13:32, Mauro Veiga via wrote:
PORT
PORTNUM=5
?ID=Telnet Server (no inbound)
?DRIVER=TELNET
?CONFIG
? LOGGING=1
? TCPPORT=8010
? FBBPORT=8011
? HTTPPORT=8080
? USER=PY1XTA,202427,PY1XTA,,SYSOP
? USER=ANON,ax25
? LOCALNET=192.168.1.108
? CTEXT=CONNECTED>
? CMS=1
? CMSCALL=PY1XTA-10
? CMSPASS=12345678
? RELAYAPPL=RMS
ENDPORT

PORT
?PORTNUM=3
?ID=AREDN 5665 MHz
?DRIVER=Telnet
?QUALITY=192
?MINQUAL=141
?CONFIG
?? LOGGING=1
?? CMS=1
?? DisconnectOnClose=0???? ;? 1 = closes window when you bye
?? TCPPORT=8010
?? FBBPORT=8011
?? HTTPPORT=8008
?? LOGINPROMPT=user:
?? PASSWORDPROMPT=password:
?? MAXSESSIONS=17
?? RELAYAPPL=RMS
?? CMSCALL=NC8Q-10?????? ; CMS Access Callsign (with SSID if used
?? RELAYHOST=127.0.0.1
?? CTEXT=Welcome to NC8Q Telnet Server\n Enter ? for list of commands\n\n
?? USER=ANON,anon ; not really
ENDPORT

Hmmm, I wonder if you need a RELAYHOST line.
?

73, Chuck
Re: Winlink Gateway question

 

¿ªÔÆÌåÓý

On 12/26/24 13:32, Mauro Veiga via groups.io wrote:
PORT
PORTNUM=5
?ID=Telnet Server (no inbound)
?DRIVER=TELNET
?CONFIG
? LOGGING=1
? TCPPORT=8010
? FBBPORT=8011
? HTTPPORT=8080
? USER=PY1XTA,202427,PY1XTA,,SYSOP
? USER=ANON,ax25
? LOCALNET=192.168.1.108
? CTEXT=CONNECTED>
? CMS=1
? CMSCALL=PY1XTA-10
? CMSPASS=12345678
? RELAYAPPL=RMS
ENDPORT

PORT
?PORTNUM=3
?ID=AREDN 5665 MHz
?DRIVER=Telnet
?QUALITY=192
?MINQUAL=141
?CONFIG
?? LOGGING=1
?? CMS=1
?? DisconnectOnClose=0???? ;? 1 = closes window when you bye
?? TCPPORT=8010
?? FBBPORT=8011
?? HTTPPORT=8008
?? LOGINPROMPT=user:
?? PASSWORDPROMPT=password:
?? MAXSESSIONS=17
?? RELAYAPPL=RMS
?? CMSCALL=NC8Q-10?????? ; CMS Access Callsign (with SSID if used
?? RELAYHOST=127.0.0.1
?? CTEXT=Welcome to NC8Q Telnet Server\n Enter ? for list of commands\n\n
?? USER=ANON,anon ; not really
ENDPORT

Hmmm, I wonder if you need a RELAYHOST line.
?

73, Chuck
Re: Winlink Gateway question

 

Hello Mark. This is my Telnet Port configuration:

PORT
PORTNUM=5
?ID=Telnet Server (no inbound)
?DRIVER=TELNET
?CONFIG
? LOGGING=1
? TCPPORT=8010
? FBBPORT=8011
? HTTPPORT=8080
? USER=PY1XTA,202427,PY1XTA,,SYSOP
? USER=ANON,ax25
? LOCALNET=192.168.1.108
? CTEXT=CONNECTED>
? CMS=1
? CMSCALL=PY1XTA-10
? CMSPASS=12345678
? RELAYAPPL=RMS
ENDPORT

Seems ok to me.?Do I need to create a PY1XTA-10 user in BPQ Mail?

Em qui., 26 de dez. de 2024 ¨¤s 11:31, Mark Taylor via <mtaylor=[email protected]> escreveu:

On Thu, Dec 26, 2024 at 06:36 AM, Mauro Veiga wrote:
Gateway PY1XTA-10 does not have a Winlink Account"
That there may be a clue.? Your APPLICATION should say connect to PY1XTA-10 but in your Telnet port CMSCALL config should only use PY1XTA. Is that it?
?
Or, you have a configuration where you are routing gateway connections through your user record Winlink check feature, although that is very unlikely.
?
?
But, I have never seen it report the error on the status window like that. So I could be way off.? Check those two things.
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
Re: Winlink Gateway question

 

On Thu, Dec 26, 2024 at 06:36 AM, Mauro Veiga wrote:
Gateway PY1XTA-10 does not have a Winlink Account"
That there may be a clue.? Your APPLICATION should say connect to PY1XTA-10 but in your Telnet port CMSCALL config should only use PY1XTA. Is that it?
?
Or, you have a configuration where you are routing gateway connections through your user record Winlink check feature, although that is very unlikely.
?
?
But, I have never seen it report the error on the status window like that. So I could be way off.? Check those two things.
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
Re: Mercury?

 

I tried to get it to do anything mostly ARQ mode, using the mercury.exe (windows). I did not have much luck yet.

Two things that are concerns for me.

1) It gets crowded around HF packet and it appears at this time it only does wide bandwidth, unlike VARA which you can force to 500Hz 2) I could not get the ARQ socket to bind to a tcp socket.

The test system was windows 10.

So I tried to reach out to the author to see what next.

73 N9SEO
Winlink Gateway question

 

Hi folks. I have a RMS Gateway working perfectly well but this error always appears in BPQ32.DLL. Apparently it doesn't cause any problem but I would like to know how to eliminate this error report.

"Wl2k Traffic Reporting disable - Gateway PY1XTA-10 does not have a Winlink Account"

TIA

20241226_092850.jpg

Re: Mercury?

 


Looks interesting.? Have you had a chance to compile it and try it out??


Tim - KF5RLL

-----------------------------------------

From: "N9SEO via groups.io"
To: [email protected]
Cc:
Sent: Wednesday December 25 2024 7:20:44PM
Subject: [bpq32] Mercury?

Hi,

Has anyone tried mercury modem yet? It is supposedly a 'vara' compatible client. So curious if it'd work in BPQ the same way VARA does. I looked at this a month or two ago but was not sure if it'd get to release level. But it looks like it has.

Well Im off to try it. With any luck maybe it'll work.

73 n9seo
Re: Mercury?

 

ER, i mean to say it is supposed to be compatible with any vara client.....
Mercury?

 

Hi,

Has anyone tried mercury modem yet? It is supposedly a 'vara' compatible client. So curious if it'd work in BPQ the same way VARA does. I looked at this a month or two ago but was not sure if it'd get to release level. But it looks like it has.

Well Im off to try it. With any luck maybe it'll work.

73 n9seo
Re: ARDOPCF and QtSoundModem?

 

Wondering if anyone can help with my configuration to get VARA HF and QTSoundmodem to share a sound device.? I tried the John G8BPQ's .asoundrc config and only changed it for my hw:1,0 sound device since that's the device I need QTSoundmodem and VARA HF to share on my my Linux Mint machine.? Dmix and dsnoop are both installed.? But I can't get the sound device to share between VARA HF and QTSoundmodem.? They will each use the soundcard fine by themselves, but not when they are running simultaneously.? QTSoundmodem shows "hw:1,0" in its dropdown menu, which is the correct soundcard.?? Here's what running the QtSoundModem64 returns, , and below that is my /asoundrc file:
?
Playback Devices
Card 0, ID `PCH', name `HDA Intel PCH'
? Device hw:0,0 ID `CX8200 Analog', name `CX8200 Analog', 1 subdevices (1 available)
? ? 2 channels, ?sampling rate 48000..192000 Hz
? Device hw:0,3 ID `HDMI 0', name `HDMI 0', 1 subdevices (1 available)
? ? 2..8 channels, sampling rate 32000..192000 Hz
? Device hw:0,7 ID `HDMI 1', name `HDMI 1', 1 subdevices (1 available)
? ? 2..8 channels, sampling rate 32000..192000 Hz
? Device hw:0,8 ID `HDMI 2', name `HDMI 2', 1 subdevices (1 available)
? ? 2..8 channels, sampling rate 32000..192000 Hz
? Device hw:0,9 ID `HDMI 3', name `HDMI 3', 1 subdevices (1 available)
? ? 2..8 channels, sampling rate 32000..192000 Hz
? Device hw:0,10 ID `HDMI 4', name `HDMI 4', 1 subdevices (1 available)
? ? 2..8 channels, sampling rate 32000..192000 Hz
Card 1, ID `HF', name `C-Media USB Headphone Set'
? Device hw:1,0 ID `USB Audio', name `USB Audio', 1 subdevices (0 available)
Error -16 opening output device
Card 2, ID `Device', name `C-Media USB Audio Device'
? Device hw:2,0 ID `USB Audio', name `USB Audio', 1 subdevices (0 available)
Error -16 opening output device
Card 3, ID `VHF', name `C-Media USB Audio Device'
? Device hw:3,0 ID `USB Audio', name `USB Audio', 1 subdevices (0 available)
Error -16 opening output device
Card 4, ID `Device_2', name `C-Media USB Audio Device'
? Device hw:4,0 ID `USB Audio', name `USB Audio', 1 subdevices (0 available)
Error -16 opening output device
Opening Playback Device hw:1,0 USB Audio(C-Media USB Headphone Set) Rate 12000
Real Device plughw:1,0
cannot open playback audio device plughw:1,0 (Device or resource busy)
qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 1423, resource id: 9917682, major code: 40 (TranslateCoords), minor code: 0
?
And my .asoundrc contents:
?
pcm.dmix02 {
? ? type dmix
? ? ipc_key 60500
? ? ipc_key_add_uid true ? # let multiple users share
? ? ipc_perm 0666 ? ? ? ? ? # IPC permissions for multi-user sharing (octal, default 0600)
? ? slave {pcm "hw:1,0"}
}
pcm.dsnoop02 {
? ? type dsnoop
? ? ipc_key 5001
? ? ipc_key_add_uid true ? # let multiple users share
? ? ipc_perm 0666 ? ? ? ? ? # IPC permissions for multi-user sharing (octal, default 0600)
? ? slave {pcm "hw:1,0"}
}
# We need to define a plug linked to our dmix/dsnoop devices to do the rate conversion to 12000
pcm.mix02 {
? ? type plug
? ? slave.pcm "dmix02" # use our new PCM here
? ? hint.description "Mix for hw:1,0"}
pcm.snoop02 {
? ? type plug
? ? slave.pcm "dsnoop02" # use our new PCM here
? ? hint.description "Snoop for hw:1,0"}
?
?
?
?
?
?
Re: Connection isn't recognized by QtTermTCP

 

I am seeing the same thing here. To connect to KC3SMW I have to use a digipeater. I see a connection response from KC3SMW but I immediately send a DM packet while KC3SMW keeps sending me a connect message until it times out. Here's the output:

11:12:45T C3SMW1-7>Y3J-11,3SK, <I R F R0 S0>
[BPQ-6.0.24.30-B2FWIHJM$]
Hello Ron NY3J you have 0 messages waiting for you.
You are an expert
de KC3SMW>
11:12:45T NY3J-11>KC3SMW-1,W3SK <DM R F>

I can connect to another station that I can connect to directly but I do want to use KC3SMW as my home BBS.

73, Ron NY3J

On 12/23/2024 5:44 PM, Eric H. Christensen via groups.io wrote:
Okay, this is strange...

The problem I had with connecting is *not* related to the callsign, maybe. Before I was going through a digipeater but now that I'm home I can connect directly, still over the radio, and everything seems to work correctly including YAPP.

YAPP still fails when I am connecting to my BBS over telnet so I continue to troubleshoot that.

73,
Eric WG3K
FM18rp
Packet: WG3K@WG3K.#SMD.MD.USA.NOAM
E-Mail: wg3k@...


On Monday, December 23rd, 2024 at 17:19, Eric H. Christensen via groups.io <wg3k@...> wrote:

Changing SSID did not fix the issue BUT changing the callsign (using my XYL's) allowed the connection to work AND YAPP to function as well. This is very odd behavior. Is this a bug in Linux or linbpq?

73,
Eric WG3K
FM18rp
Packet: WG3K@WG3K.#SMD.MD.USA.NOAM
E-Mail: wg3k@...




On Monday, December 23rd, 2024 at 17:02, Eric H. Christensen via groups.io wg3k@... wrote:

I changed my client SSID but that still didn't seem to fix the issue.

73,
Eric WG3K
FM18rp
Packet: WG3K@WG3K.#SMD.MD.USA.NOAM
E-Mail: wg3k@...

On Monday, December 23rd, 2024 at 15:25, John G8BPQ via groups.io john.wiseman@... wrote:

That is typical of what happens when you have two stations with the same
call (WG3K) on the frequency at the same time. I could be something
else, but make sure you don't have another station (apart from QtTerm)
active.

73,
John

On 23/12/2024 17:26, Eric H. Christensen via groups.io wrote:

Good day all,
I'm running QtTermTCP64 version 0.0.0.77 Beta 1 and have it connected to my Kenwood D-74 in KISS mode. When I try to connect to my home node I see the connection happen but QtTermTCP doesn't ever recognize it as connected. Anyone have any ideas?

17:00:46T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:00:54T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:00:56R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:00:56R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:01:00R CBEACH>WG3K,K3CAL-1* <UA R F>
17:01:00T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:00R CBEACH>WG3K,K3CAL-1* <I C P R0 S0>
Welcome to WG3K Node in Chesapeake Beach, Maryland. Use ¡°?¡± for Help menu.
CBBBS:WG3K}
17:01:00T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:01R CBEACH>WG3K,K3CAL-1* <UA R F>
17:01:01T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:02T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:01:03R WG3K>CBEACH,K3CAL-1* <DM R F>
17:01:03R WG3K>CBEACH,K3CAL-1* <DM R F>
17:01:03R WG3K>CBEACH,K3CAL-1* <DM R F>
17:01:03R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:01:07R CBEACH>WG3K,K3CAL-1* <UA R F>
17:01:07T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:10T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:01:11R WG3K>CBEACH,K3CAL-1* <DM R F>
17:01:11R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:01:15R CBEACH>WG3K,K3CAL-1* <UA R F>
17:01:15T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:15R CBEACH>WG3K,K3CAL-1* <I C P R0 S0>
Welcome to WG3K Node in Chesapeake Beach, Maryland. Use ¡°?¡± for Help menu.
CBBBS:WG3K}
17:01:15T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:18T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:01:26T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:01:28R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:01:31R CBEACH>WG3K,K3CAL-1* <UA R F>
17:01:31T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:32R CBEACH>WG3K,K3CAL-1* <I C P R0 S0>
Welcome to WG3K Node in Chesapeake Beach, Maryland. Use ¡°?¡± for Help menu.
CBBBS:WG3K}
17:01:32T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:34T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:01:42T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:01:46R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:01:47R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:01:49R CBEACH>WG3K,K3CAL-1* <UA R F>
17:01:49T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:49R CBEACH>WG3K,K3CAL-1* <UA R F>
17:01:49T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:50T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:01:58T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:02:01R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:02:01R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:02:04R CBEACH>WG3K,K3CAL-1* <UA R F>
17:02:04T WG3K>CBEACH,K3CAL-1 <DM R F>
17:02:05R CBEACH>WG3K,K3CAL-1* <UA R F>
17:02:05T WG3K>CBEACH,K3CAL-1 <DM R F>
17:02:06T WG3K>CBEACH,K3CAL-1 <DISC C P>
17:02:08R WG3K>CBEACH,K3CAL-1* <DM R F>
17:02:08R WG3K>CBEACH,K3CAL-1* <DM R F>
17:02:09R WG3K>CBEACH,K3CAL-1* <DISC C P>
17:02:11R CBEACH>WG3K,K3CAL-1* <DM R F>
17:02:11T WG3K>CBEACH,K3CAL-1 <DM R F>
17:02:13R WG3K>CBEACH,K3CAL-1* <DM R F>

73,
Eric WG3K
FM18rp
Packet: WG3K@WG3K.#SMD.MD.USA.NOAM
E-Mail: wg3k@...
Re: chat link problem

 

VE2PKT-6 Mismatched Links VE2PKT-8 VA2CAT-3
VE2PKT-8 Not Reporting Mismatched Links VE2YAG-11 VE2PKT-6
?
?
Any chance the far end is tryig to connect to the -8?
You're still showing good routes to all?
?
?
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
Re: chat link problem

 

Hi Mark,

On 2024-12-23 17:18, Mark Taylor via groups.io wrote:
Do all five of the links have a node entry in your nodes table?
Yes
Do all five of the links have reciprocal chat links configured back to you?
Pretty sure they do.


73 de Jean
Re: chat link problem

 

Do all five of the links have a node entry in your nodes table?
Do all five of the links have reciprocal chat links configured back to you?
?
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
Re: Connection isn't recognized by QtTermTCP

 

Okay, this is strange...

The problem I had with connecting is *not* related to the callsign, maybe. Before I was going through a digipeater but now that I'm home I can connect directly, still over the radio, and everything seems to work correctly including YAPP.

YAPP still fails when I am connecting to my BBS over telnet so I continue to troubleshoot that.

73,
Eric WG3K
FM18rp
Packet: WG3K@WG3K.#SMD.MD.USA.NOAM
E-Mail: wg3k@...

On Monday, December 23rd, 2024 at 17:19, Eric H. Christensen via groups.io <wg3k@...> wrote:

Changing SSID did not fix the issue BUT changing the callsign (using my XYL's) allowed the connection to work AND YAPP to function as well. This is very odd behavior. Is this a bug in Linux or linbpq?

73,
Eric WG3K
FM18rp
Packet: WG3K@WG3K.#SMD.MD.USA.NOAM
E-Mail: wg3k@...




On Monday, December 23rd, 2024 at 17:02, Eric H. Christensen via groups.io wg3k@... wrote:

I changed my client SSID but that still didn't seem to fix the issue.

73,
Eric WG3K
FM18rp
Packet: WG3K@WG3K.#SMD.MD.USA.NOAM
E-Mail: wg3k@...

On Monday, December 23rd, 2024 at 15:25, John G8BPQ via groups.io john.wiseman@... wrote:

That is typical of what happens when you have two stations with the same
call (WG3K) on the frequency at the same time. I could be something
else, but make sure you don't have another station (apart from QtTerm)
active.

73,
John

On 23/12/2024 17:26, Eric H. Christensen via groups.io wrote:

Good day all,
I'm running QtTermTCP64 version 0.0.0.77 Beta 1 and have it connected to my Kenwood D-74 in KISS mode. When I try to connect to my home node I see the connection happen but QtTermTCP doesn't ever recognize it as connected. Anyone have any ideas?

17:00:46T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:00:54T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:00:56R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:00:56R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:01:00R CBEACH>WG3K,K3CAL-1* <UA R F>
17:01:00T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:00R CBEACH>WG3K,K3CAL-1* <I C P R0 S0>
Welcome to WG3K Node in Chesapeake Beach, Maryland. Use ¡°?¡± for Help menu.
CBBBS:WG3K}
17:01:00T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:01R CBEACH>WG3K,K3CAL-1* <UA R F>
17:01:01T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:02T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:01:03R WG3K>CBEACH,K3CAL-1* <DM R F>
17:01:03R WG3K>CBEACH,K3CAL-1* <DM R F>
17:01:03R WG3K>CBEACH,K3CAL-1* <DM R F>
17:01:03R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:01:07R CBEACH>WG3K,K3CAL-1* <UA R F>
17:01:07T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:10T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:01:11R WG3K>CBEACH,K3CAL-1* <DM R F>
17:01:11R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:01:15R CBEACH>WG3K,K3CAL-1* <UA R F>
17:01:15T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:15R CBEACH>WG3K,K3CAL-1* <I C P R0 S0>
Welcome to WG3K Node in Chesapeake Beach, Maryland. Use ¡°?¡± for Help menu.
CBBBS:WG3K}
17:01:15T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:18T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:01:26T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:01:28R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:01:31R CBEACH>WG3K,K3CAL-1* <UA R F>
17:01:31T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:32R CBEACH>WG3K,K3CAL-1* <I C P R0 S0>
Welcome to WG3K Node in Chesapeake Beach, Maryland. Use ¡°?¡± for Help menu.
CBBBS:WG3K}
17:01:32T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:34T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:01:42T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:01:46R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:01:47R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:01:49R CBEACH>WG3K,K3CAL-1* <UA R F>
17:01:49T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:49R CBEACH>WG3K,K3CAL-1* <UA R F>
17:01:49T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:50T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:01:58T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:02:01R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:02:01R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:02:04R CBEACH>WG3K,K3CAL-1* <UA R F>
17:02:04T WG3K>CBEACH,K3CAL-1 <DM R F>
17:02:05R CBEACH>WG3K,K3CAL-1* <UA R F>
17:02:05T WG3K>CBEACH,K3CAL-1 <DM R F>
17:02:06T WG3K>CBEACH,K3CAL-1 <DISC C P>
17:02:08R WG3K>CBEACH,K3CAL-1* <DM R F>
17:02:08R WG3K>CBEACH,K3CAL-1* <DM R F>
17:02:09R WG3K>CBEACH,K3CAL-1* <DISC C P>
17:02:11R CBEACH>WG3K,K3CAL-1* <DM R F>
17:02:11T WG3K>CBEACH,K3CAL-1 <DM R F>
17:02:13R WG3K>CBEACH,K3CAL-1* <DM R F>

73,
Eric WG3K
FM18rp
Packet: WG3K@WG3K.#SMD.MD.USA.NOAM
E-Mail: wg3k@...
chat link problem

 

¿ªÔÆÌåÓý

Hi Group,

???? Any one else has similar problems, my chat link connect stay connected and when it tri my log say:

241223 22:29:33 >VE2YAG-11 [BPQChatServer-6.0.24.42]
241223 22:29:33 !VE2YAG-11 Node VE2YAG-11 connected, but is not defined as a Node - closing
241223 22:29:33 >VE2YAG-11 Node VE2PKT-6 does not have VE2YAG-11 defined as a node to link to - closing.
241223 22:29:34 |VE2YAG-11 Chat User VE2YAG-11 Disconnected

it say it's not defines as a node but this is what I have in my chatconfig.

any that node is in my table list too.

What I am missing here?

Merry Christmas to all.


-- 
73 de Jean,
VA2OM / VE2PKT

Sysop de: VE2PKT (BBS), VE2PKT-2 (BPQNode), VE2PKT-4 (XRPI)
        : VE2PKT-5 (Jnos), VE2PKT-9 (DXCluster)

RF: 145.05 Mhz (1.2K Bps) Packet, 147.435 Mhz, VARA

Internet:
Telnet: ve2pkt.dyndns.org port 2323 (Xrpi Node) - VE2PKT-4
Telnet: ve2pkt.dyndns.org port 9000 (DXCluster) - VE2PKT-9

AMPR Network:
Telnet xrouter.ve2pkt.ampr.org (XRPI Node) = VE2PKT-4
Telnet dxc.ve2pkt.dyndns.org (DXCluster) = V2PKT-9
Telnet bpq.ve2pkt.ampr.org (BPQ BBS) = VE2PKT-2
Telnet jnos.ve2pkt.ampr.org (Jnos) = VE2PKT-5


E-Mail:
packet:   va2om@ve2pkt.#qbc.qc.can.noam
ampr net: va2om@...
Inet:     ve2pkt@...

Membre Createur du groupe [email protected]

/g/PacketQuebec

Carte des Station RF au Quebec

Re: Connection isn't recognized by QtTermTCP

 

Changing SSID did not fix the issue BUT changing the callsign (using my XYL's) allowed the connection to work AND YAPP to function as well. This is very odd behavior. Is this a bug in Linux or linbpq?

73,
Eric WG3K
FM18rp
Packet: WG3K@WG3K.#SMD.MD.USA.NOAM
E-Mail: wg3k@...

On Monday, December 23rd, 2024 at 17:02, Eric H. Christensen via groups.io <wg3k@...> wrote:

I changed my client SSID but that still didn't seem to fix the issue.

73,
Eric WG3K
FM18rp
Packet: WG3K@WG3K.#SMD.MD.USA.NOAM
E-Mail: wg3k@...




On Monday, December 23rd, 2024 at 15:25, John G8BPQ via groups.io john.wiseman@... wrote:

That is typical of what happens when you have two stations with the same
call (WG3K) on the frequency at the same time. I could be something
else, but make sure you don't have another station (apart from QtTerm)
active.

73,
John

On 23/12/2024 17:26, Eric H. Christensen via groups.io wrote:

Good day all,
I'm running QtTermTCP64 version 0.0.0.77 Beta 1 and have it connected to my Kenwood D-74 in KISS mode. When I try to connect to my home node I see the connection happen but QtTermTCP doesn't ever recognize it as connected. Anyone have any ideas?

17:00:46T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:00:54T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:00:56R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:00:56R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:01:00R CBEACH>WG3K,K3CAL-1* <UA R F>
17:01:00T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:00R CBEACH>WG3K,K3CAL-1* <I C P R0 S0>
Welcome to WG3K Node in Chesapeake Beach, Maryland. Use ¡°?¡± for Help menu.
CBBBS:WG3K}
17:01:00T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:01R CBEACH>WG3K,K3CAL-1* <UA R F>
17:01:01T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:02T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:01:03R WG3K>CBEACH,K3CAL-1* <DM R F>
17:01:03R WG3K>CBEACH,K3CAL-1* <DM R F>
17:01:03R WG3K>CBEACH,K3CAL-1* <DM R F>
17:01:03R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:01:07R CBEACH>WG3K,K3CAL-1* <UA R F>
17:01:07T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:10T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:01:11R WG3K>CBEACH,K3CAL-1* <DM R F>
17:01:11R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:01:15R CBEACH>WG3K,K3CAL-1* <UA R F>
17:01:15T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:15R CBEACH>WG3K,K3CAL-1* <I C P R0 S0>
Welcome to WG3K Node in Chesapeake Beach, Maryland. Use ¡°?¡± for Help menu.
CBBBS:WG3K}
17:01:15T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:18T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:01:26T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:01:28R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:01:31R CBEACH>WG3K,K3CAL-1* <UA R F>
17:01:31T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:32R CBEACH>WG3K,K3CAL-1* <I C P R0 S0>
Welcome to WG3K Node in Chesapeake Beach, Maryland. Use ¡°?¡± for Help menu.
CBBBS:WG3K}
17:01:32T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:34T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:01:42T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:01:46R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:01:47R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:01:49R CBEACH>WG3K,K3CAL-1* <UA R F>
17:01:49T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:49R CBEACH>WG3K,K3CAL-1* <UA R F>
17:01:49T WG3K>CBEACH,K3CAL-1 <DM R F>
17:01:50T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:01:58T WG3K>CBEACH,K3CAL-1 <SABM C P>
17:02:01R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:02:01R WG3K>CBEACH,K3CAL-1* <SABM C P>
17:02:04R CBEACH>WG3K,K3CAL-1* <UA R F>
17:02:04T WG3K>CBEACH,K3CAL-1 <DM R F>
17:02:05R CBEACH>WG3K,K3CAL-1* <UA R F>
17:02:05T WG3K>CBEACH,K3CAL-1 <DM R F>
17:02:06T WG3K>CBEACH,K3CAL-1 <DISC C P>
17:02:08R WG3K>CBEACH,K3CAL-1* <DM R F>
17:02:08R WG3K>CBEACH,K3CAL-1* <DM R F>
17:02:09R WG3K>CBEACH,K3CAL-1* <DISC C P>
17:02:11R CBEACH>WG3K,K3CAL-1* <DM R F>
17:02:11T WG3K>CBEACH,K3CAL-1 <DM R F>
17:02:13R WG3K>CBEACH,K3CAL-1* <DM R F>

73,
Eric WG3K
FM18rp
Packet: WG3K@WG3K.#SMD.MD.USA.NOAM
E-Mail: wg3k@...
1121 - 1140 of 43737