开云体育

Yes, you can add BW commands to the connect script, after attach and before connect. Format is BW500, BW2300 or BW2750 and for VARAFM FM1200 or FM9600. If you include a BW command in the port config

Does the default (bandwidth) setting for a VARA port impact outbound only, or does it impact incoming connections also? Thanks, Lee K5DAT

[email protected]> wrote: Thanks Mark! Yes, up until now I've been running VARA 500 exclusively, so that has been checked all along. > > 73, Lee K5DAT

Yes, in the connect script, after the attach you can use the BWxxxx to change your transmit bandwidth. Be sure and check to allow 500hz connections in the Vara TNC settings.? It has always worked for

Hello, To provide an example, I'm scanning both 20m and 40m during the day, and the same BPQ port for VARA applies. The default mode is BW500, and that's needed for the 40m frequency. On 20m I could

Eric, I'm guessing you are either completely frustrated with this or you have it fixed.? I'd be curious to know if you fixed it... If not I think there are two possibilities. 1. Something has been

Another example from today: In the monitor window: *20:18:01R KK4DIV-1>K0WAV-7 Port=2 <D C P>* but in MH list no KK4DIV-1 *mh 2* *RFTMG:K7TMG-7} Heard List for Port 2* *K7TMG. ? ? 00:00:08:09*

HIDENODES only stop the display of nodes with an alias starting with # in the NODES display. NODE=0 disables the node functions and only allows connects to your applications. The NODECALL is ignored

Never mind - I figured it out.? SIMPLE already included the NODE and HIDENODES settings and my configuration reversed them.? I guess HIDENODES hides the subject node as well :) Thanks for the

Try setting NODE=1

Thanks Mark.? The NODECALL and NODEALIAS are right at the top of the config file: SIMPLE LOCATOR=43.397939, -79.976857 NODECALL=VA3AMJ-7 NODEALIAS=CARLYL CTEXT: ...and so on.? Further down I have:

Be sure your NODECALL and NOALIAS is not contained within a multiline comment.

I'm working through the configuration of a LinBPQ node.? Using the terminal on the html page, I see that the node is taking the SSID and ALIAS of either the chat server or the BBS (depending upon

I'm sure I was looking at your -8 then...

Mark, Port 2 is the SCS Tracker running the bpq hostmode driver. *RFTMG:K7TMG-7} Ports* *1 Loopback* *2 SCS Tracker (hostmode)* *3 Telnet* There is no tcp/udp port on this instance of BPQ. This is on

Another possibility Eric is that you give someone admin access over the web to your node to double check your settings.? At this point it wouldn't hurt. I'll be glad to if you want.. email on my node

Yes, they are being treated as directed. I guess it would be useful to display your HA as part of the routing trace, but it seems it doesn't think you are in USA or NOAM! 73, John

Here are the logs from the recent @USA and @NA messages: 240929 07:50:51 |KA1VSC-4 Incoming Connect from KA1VSC 240929 07:50:51 >KA1VSC-4 [BPQ-6.0.24.42-B1FWIHJM$] 240929 07:50:51 >KA1VSC-4 240929

Port 2 is your AXIP port. On windows my AXIP Port MHeard List only shows direct connections to my node.? Not pass through connections.? Could it be the same on linux?

I don't think so. ?WG3K.#SMD.MD.USA.NOAM is the H Address. ?#SMD.MD.USA.NOAM is the H Route. The only things I can imagine at this point is, are those copy/paste or typed in.? I sometimes will