¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Bpq32
  2. Messages
Expanded Topics Messages
Date
Packets don't get acknowledged by the receiving node

 

Hello,
?
I am trying to set up a node that can run an application for me that can be accessed via hf radio. I have a test setup with two each of hf radios and sound cards and computers (the server computer is running linbpq and the client computer is running bpq32), and I'm trying to get the packet transfer to go smoothly, but it seems that the node that runs the application starts spitting out packets as fast as it can, and the receiving end stops receiving them. I'm using direwolf tnc on both computers. I would wonder if this was beyond the ability of packet, but I wouldn't know.. Here is what it says in direwolf on the "server" node from start to finish:
?
KQ4RST-1 audio level = 119 ? FX.25 ? _000___
Audio input level is too high. ?Reduce so most stations are around 50.
[0.2] KQ4RST-1>KQ4RST-7:(SABM cmd, p=1)
[0L] KQ4RST-7>KQ4RST-1:(UA res, f=1)
KQ4RST-1 audio level = 119 ? FX.25 ? _00____
Audio input level is too high. ?Reduce so most stations are around 50.
[0.1] KQ4RST-1>KQ4RST-7:(I cmd, n(s)=0, n(r)=0, p=1, pid=0xf0)irc<0x0d>
[0L] KQ4RST-7>KQ4RST-1:(RR res, n(r)=1, f=1)
[0L] KQ4RST-7>KQ4RST-1:(I cmd, n(s)=0, n(r)=1, p=0, pid=0xf0)*** Connected to IRC ? ? ? ? <0x0d>
[0L] KQ4RST-7>KQ4RST-1:(I cmd, n(s)=1, n(r)=1, p=0, pid=0xf0):kq4rst.irc.com NOTICE Auth :*** Looking up your hostname...<0x0d>:kq
[0L] KQ4RST-7>KQ4RST-1:(I cmd, n(s)=2, n(r)=1, p=1, pid=0xf0)4rst.irc.com NOTICE Auth :*** Found your hostname (localhost)<0x0d>
[0L] KQ4RST-7>KQ4RST-1:(RR cmd, n(r)=1, p=1)
[0L] KQ4RST-7>KQ4RST-1:(RR cmd, n(r)=1, p=1)
KQ4RST-1 audio level = 119 ? FX.25 ? _000___
Audio input level is too high. ?Reduce so most stations are around 50.
[0.2] KQ4RST-1>KQ4RST-7:(RR res, n(r)=1, f=0)
KQ4RST-1 audio level = 120 ? FX.25 ? _000___
Audio input level is too high. ?Reduce so most stations are around 50.
[0.2] KQ4RST-1>KQ4RST-7:(RR res, n(r)=2, f=0)
KQ4RST-1 audio level = 120 ? FX.25 ? _000___
Audio input level is too high. ?Reduce so most stations are around 50.
[0.2] KQ4RST-1>KQ4RST-7:(RR res, n(r)=3, f=1)
KQ4RST-1 audio level = 121 ? FX.25 ? _000___
Audio input level is too high. ?Reduce so most stations are around 50.
[0.2] KQ4RST-1>KQ4RST-7:(RR res, n(r)=3, f=1)
[0L] KQ4RST-7>KQ4RST-1:(RR cmd, n(r)=1, p=1)
KQ4RST-1 audio level = 118 ? FX.25 ? _111___
Audio input level is too high. ?Reduce so most stations are around 50.
[0.2] KQ4RST-1>KQ4RST-7:(RR res, n(r)=3, f=1)
KQ4RST-1 audio level = 116 ? FX.25 ? _11____
Audio input level is too high. ?Reduce so most stations are around 50.
[0.1] KQ4RST-1>KQ4RST-7:(I cmd, n(s)=1, n(r)=3, p=1, pid=0xf0)NICK matt<0x0d>
[0L] KQ4RST-7>KQ4RST-1:(RR res, n(r)=2, f=1)
KQ4RST-1 audio level = 120 ? FX.25 ? _000___
Audio input level is too high. ?Reduce so most stations are around 50.
[0.2] KQ4RST-1>KQ4RST-7:(I cmd, n(s)=2, n(r)=3, p=1, pid=0xf0)USER matt * * :mattr<0x0d>
[0L] KQ4RST-7>KQ4RST-1:(RR res, n(r)=3, f=1)
[0L] KQ4RST-7>KQ4RST-1:(I cmd, n(s)=3, n(r)=3, p=0, pid=0xf0):kq4rst.irc.com NOTICE Auth :Welcome to <0x02>KQ4RST<0x02>!<0x0d>:kq4rst.irc.co
[0L] KQ4RST-7>KQ4RST-1:(I cmd, n(s)=4, n(r)=3, p=0, pid=0xf0)m 001 matt :Welcome to the KQ4RST IRC Network matt!matt@localhos
[0L] KQ4RST-7>KQ4RST-1:(I cmd, n(s)=5, n(r)=3, p=0, pid=0xf0)t<0x0d>:kq4rst.irc.com 002 matt :Your host is kq4rst.irc.com, running
[0L] KQ4RST-7>KQ4RST-1:(I cmd, n(s)=6, n(r)=3, p=1, pid=0xf0) version InspIRCd-2.0<0x0d>:kq4rst.irc.com 003 matt :This server was<0x20>
[0L] KQ4RST-7>KQ4RST-1:(RR cmd, n(r)=3, p=1)
[0L] KQ4RST-7>KQ4RST-1:(RR cmd, n(r)=3, p=1)
[0L] KQ4RST-7>KQ4RST-1:(RR cmd, n(r)=3, p=1)
KQ4RST-1 audio level = 119 ? FX.25 ? _00____
Audio input level is too high. ?Reduce so most stations are around 50.
[0.1] KQ4RST-1>KQ4RST-7:(RR res, n(r)=4, f=0)
KQ4RST-1 audio level = 118 ? FX.25 ? _00____
Audio input level is too high. ?Reduce so most stations are around 50.
[0.1] KQ4RST-1>KQ4RST-7:(RR res, n(r)=5, f=0)
KQ4RST-1 audio level = 117 ? FX.25 ? _00____
Audio input level is too high. ?Reduce so most stations are around 50.
[0.1] KQ4RST-1>KQ4RST-7:(RR res, n(r)=6, f=0)
KQ4RST-1 audio level = 119 ? FX.25 ? _00____
Audio input level is too high. ?Reduce so most stations are around 50.
[0.1] KQ4RST-1>KQ4RST-7:(RR res, n(r)=7, f=1)
KQ4RST-1 audio level = 119 ? FX.25 ? _10____
Audio input level is too high. ?Reduce so most stations are around 50.
[0.2] KQ4RST-1>KQ4RST-7:(RR res, n(r)=7, f=1)
[0L] KQ4RST-7>KQ4RST-1:(RR cmd, n(r)=3, p=1)
[0L] KQ4RST-7>KQ4RST-1:(I cmd, n(s)=7, n(r)=3, p=0, pid=0xf0)created 04:31:21 Aug 16 2024<0x0d>:kq4rst.irc.com 004 matt kq4rst.irc
[0L] KQ4RST-7>KQ4RST-1:(I cmd, n(s)=0, n(r)=3, p=0, pid=0xf0).com InspIRCd-2.0 iosw biklmnopstv bklov<0x0d>:kq4rst.irc.com 005 mat
[0L] KQ4RST-7>KQ4RST-1:(I cmd, n(s)=1, n(r)=3, p=0, pid=0xf0)t AWAYLEN=200 CASEMAPPING=rfc1459 CHANMODES=b,k,l,imnpst CHANNEL
?
The client computer stops registering any communication right here.
?

[0L] KQ4RST-7>KQ4RST-1:(I cmd, n(s)=2, n(r)=3, p=1, pid=0xf0)LEN=64 CHANTYPES=# CHARSET=ascii ELIST=MU FNC KICKLEN=255 MAP MA
[0L] KQ4RST-7>KQ4RST-1:(I cmd, n(s)=7, n(r)=3, p=0, pid=0xf0)created 04:31:21 Aug 16 2024<0x0d>:kq4rst.irc.com 004 matt kq4rst.irc
[0L] KQ4RST-7>KQ4RST-1:(I cmd, n(s)=0, n(r)=3, p=0, pid=0xf0).com InspIRCd-2.0 iosw biklmnopstv bklov<0x0d>:kq4rst.irc.com 005 mat
[0L] KQ4RST-7>KQ4RST-1:(I cmd, n(s)=1, n(r)=3, p=0, pid=0xf0)t AWAYLEN=200 CASEMAPPING=rfc1459 CHANMODES=b,k,l,imnpst CHANNEL
[0L] KQ4RST-7>KQ4RST-1:(I cmd, n(s)=2, n(r)=3, p=1, pid=0xf0)LEN=64 CHANTYPES=# CHARSET=ascii ELIST=MU FNC KICKLEN=255 MAP MA
[0L] KQ4RST-7>KQ4RST-1:(RR cmd, n(r)=3, p=1)
[0L] KQ4RST-7>KQ4RST-1:(RR cmd, n(r)=3, p=1)
[0L] KQ4RST-7>KQ4RST-1:(RR cmd, n(r)=3, p=1)
[0L] KQ4RST-7>KQ4RST-1:(RR cmd, n(r)=3, p=1)
[0L] KQ4RST-7>KQ4RST-1:(RR cmd, n(r)=3, p=1)
[0L] KQ4RST-7>KQ4RST-1:(DISC cmd, p=1)
?
I attached the config file that I am using for both the client and the server bpq nodes. What could be the cause the packets failing to be received? Just too much information?.. Or is it configured incorrectly?
?
Thanks, guys
?

bpq32.cfg
bpq32.cfg

Re: Settings for telnet RMS Gateway?

 

Were you ever able to get this working? I just went through the process of setting up LinBPQ and was hoping I would be able to send and receive messages on it through RadioMail!
Re: NETROM packets arriving out of sequence

 

¿ªÔÆÌåÓý

Hi Kevin.

QtTermTCP monitor is probably the simplest and if you have a recent version you can log monitor output to disk.

Assuming it is a single netrom connect then any packet resequencing will be done at the final node so a trace of that should be enough. The syslog output may also be useful as that may have details of packets arriving out of sequence.

73,
John


On 15/08/2024 22:19, Kevin, M0AHN wrote:

Hello John
?
I run a BPQ node in the South West of England and have observed some occasions where packets are arriving out of order over NETROM. The symptom is seen when connecting over 2 hops (so 3 BPQ nodes involved) to both a BBS and custom Application hosted on a TCP port.
?
Recovery when using the BBS is relatively straightforward, just request the message again. It is fatal for the custom application though, which is sending structured data.?
?
I'd be happy to try and reproduce the issue but wanted to ask how best to capture the logs? I can run a monitor in QtTermTCP, or via the AGW port, or using KISS Proxy. Also, do you need the logs from all 3 BPQ nodes involved or just the final node where the problem was observed?
?
Thanks in advance
?
73
Kevin
NETROM packets arriving out of sequence

 

Hello John
?
I run a BPQ node in the South West of England and have observed some occasions where packets are arriving out of order over NETROM. The symptom is seen when connecting over 2 hops (so 3 BPQ nodes involved) to both a BBS and custom Application hosted on a TCP port.
?
Recovery when using the BBS is relatively straightforward, just request the message again. It is fatal for the custom application though, which is sending structured data.?
?
I'd be happy to try and reproduce the issue but wanted to ask how best to capture the logs? I can run a monitor in QtTermTCP, or via the AGW port, or using KISS Proxy. Also, do you need the logs from all 3 BPQ nodes involved or just the final node where the problem was observed?
?
Thanks in advance
?
73
Kevin
Re: Enable Forwarding and Send Personal Mail Only Question

 

Jeff to the rescue!! - Thanks!
73 de Chris ww2bsa

On 08/14/2024 1:51 PM EDT Jeff KP3FT via groups.io <kp3ft@...> wrote:
?
?
Keep forwarding enabled and tick Send Personal Mail Only.? That'll work; I found out by accident a couple years ago... Personal Mail Only was ticked and I didn't know it, and wondered why Bulls were never getting forwarded :)

Re: Enable Forwarding and Send Personal Mail Only Question

 

Keep forwarding enabled and tick Send Personal Mail Only.? That'll work; I found out by accident a couple years ago... Personal Mail Only was ticked and I didn't know it, and wondered why Bulls were never getting forwarded :)
Enable Forwarding and Send Personal Mail Only Question

 

My forwarding partner is requesting a temp stop to sending bulletins to his BBS.
?
Should I:
Un-tick? Enable Forwarding? (or will this stop ALL forwarding - personal and bulls?)
Tick Send Personal Mail Only? (keep forwarding on but tick this to send personal only?)
or
Un-tick Fowarding AND tick Send Personal Mail?
?
Thank you in advance as I wasn't successful in locating this answer in previous posts.
?
73 de Chris
ww2bsa.org
Re: AXResolver

Richard Hendricks - KE0GB
 

John:
?
It was a case of bad syntax.? We had set it to:
?
AUTOADDMAP OFF
?
BPQ32 ignores the argument and enabled it.
?
Correct syntax:
?
AUTOADDMAP
?
...by itself with no arguments, and a semicolon to comment it out to disable,
or by just leaving it out of bpq32.cfg.
?
73 - Rick
KE0GB
?
Re: AXResolver

 

¿ªÔÆÌåÓý

A means automatically added as a result of AUTOADDMAP. If you don't have that then it looks like a bug. Can you send me the config?

Thanks,
John


On 11/08/2024 21:34, Richard Hendricks - KE0GB wrote:

John:

?

We have a question regarding the axresolver:

?

What does an "A" at the end of an axr <port#> line mean?

e.g., appearing on N0HI-7 node:

?

AC0VC-7 = 74.81.169.118 10093 = 74.81.169.118 B A

?

We are trying to delink ac0vc-7 from n0hi-7 node, but haven't had any success.

?

The MAP statement, whereas AC0VC was using AC0VC.DDNS.NET, has been deleted

from N0HI-7, but AC0VC is not available to delete the MAP statement from his end.?

?

We are wondering what the "A" stands for and if there's a way to resolve this.?

?

N0HI also tried deleting BPQNodes.dat and rebooted, but no success.

?

Thanks.

?

73 - Rick

KE0GB

?

?
Re: AXResolver

Richard Hendricks - KE0GB
 

For the time being, we locked out the route in the "ROUTES:" table.
?
I found the answer to the "A" question in a previous topic.
?
73 - Rick
KE0GB
?
Re: AXResolver

Richard Hendricks - KE0GB
 

In addition:? AUTOADDMAP is not enabled at N0HI-7.
?
RH
AXResolver

Richard Hendricks - KE0GB
 

John:

?

We have a question regarding the axresolver:

?

What does an "A" at the end of an axr <port#> line mean?

e.g., appearing on N0HI-7 node:

?

AC0VC-7 = 74.81.169.118 10093 = 74.81.169.118 B A

?

We are trying to delink ac0vc-7 from n0hi-7 node, but haven't had any success.

?

The MAP statement, whereas AC0VC was using AC0VC.DDNS.NET, has been deleted

from N0HI-7, but AC0VC is not available to delete the MAP statement from his end.?

?

We are wondering what the "A" stands for and if there's a way to resolve this.?

?

N0HI also tried deleting BPQNodes.dat and rebooted, but no success.

?

Thanks.

?

73 - Rick

KE0GB

?

?
Re: RIGCONTROL for FT-1000MP

 

Thanks, John. :-)
73

Em sex., 9 de ago. de 2024 12:34, John G8BPQ via <john.wiseman=[email protected]> escreveu:

Try

?PORT SPEED YAESU FT1000MP

73, John



On 08/08/2024 12:42, Mauro Veiga wrote:
Hi folks. I have an FT-1000MP with a CAT control cable, but I can't create a RIGCONTROL, don't work. I suspect it is the CI-V address. What would be the value? Does anyone know the correct line for the FT-1000MP?
Re: RIGCONTROL for FT-1000MP

 

¿ªÔÆÌåÓý

Try

?PORT SPEED YAESU FT1000MP

73, John



On 08/08/2024 12:42, Mauro Veiga wrote:

Hi folks. I have an FT-1000MP with a CAT control cable, but I can't create a RIGCONTROL, don't work. I suspect it is the CI-V address. What would be the value? Does anyone know the correct line for the FT-1000MP?
Re: RIGCONTROL for FT-1000MP

 

Thanks, Mauro.
73


Em qui., 8 de ago. de 2024 13:12, Mauro - AG7BI via <ag7bi=[email protected]> escreveu:

The CI-V is for ICOM radios not Yaesu. For Yaesu you just need just the serial port. I don't have that model so I cannot be more specific.
Re: RIGCONTROL for FT-1000MP

 

The CI-V is for ICOM radios not Yaesu. For Yaesu you just need just the serial port. I don't have that model so I cannot be more specific.
RIGCONTROL for FT-1000MP

 

Hi folks. I have an FT-1000MP with a CAT control cable, but I can't create a RIGCONTROL, don't work. I suspect it is the CI-V address. What would be the value? Does anyone know the correct line for the FT-1000MP?

Annotium1723116892.jpg

Re: QSoundModem crashes on BPQ restart

 

¿ªÔÆÌåÓý

Thanks, Mauro.

I'll look into it.

73, John

On 07/08/2024 23:58, Mauro - AG7BI wrote:

John - G8BPQ,
?
using QSoundModem 72 and BPQ 6.0.24.40 in Linux restarting the node causes a segfault of the modem. I am not sure if this is a problem with my system or a bug since I just moved? from running QSoundModem on a Window machine to linux.?
?
It seem that the crash occurs when the node is starting up again since I see it at the same time that the pactor modem is reinitialized.?
?
Let me know if you need any more details. Thanks for the always great work you do for all of us.
?
Mauro - AG7BI
QSoundModem crashes on BPQ restart

 

John - G8BPQ,
?
using QSoundModem 72 and BPQ 6.0.24.40 in Linux restarting the node causes a segfault of the modem. I am not sure if this is a problem with my system or a bug since I just moved? from running QSoundModem on a Window machine to linux.?
?
It seem that the crash occurs when the node is starting up again since I see it at the same time that the pactor modem is reinitialized.?
?
Let me know if you need any more details. Thanks for the always great work you do for all of us.
?
Mauro - AG7BI
Re: IL2P in HF

 

On 8/5/24 10:20, Mauro Veiga wrote:
Is possible to use WinRPR on BPQ32 to offer a RMS Gateway?
This reply seems to be off topic.

73, Chuck
1921 - 1940 of 43610