Re: TeensyPI 9K6 as a HAT
That isn't mine so I'm afraid I don't know.
73
John
On 22/02/2021 18:41, Frank KO4FQW
wrote:
toggle quoted message
Show quoted text
John,
?
I used this one for Teensy 3.6 as a HAT for raspberry pi.
Is this the latest one?
?
Thanks
Frank
KO4FQW
|
Re: TeensyPI 9K6 as a HAT
John,
?
I used this one for Teensy 3.6 as a HAT for raspberry pi.
Is this the latest one?
?
Thanks
Frank
KO4FQW
|
Re: TeensyPI 9K6 as a HAT
The hex file for a Teensy 3.2 using the serial port on the Pi is
The source is at
73,
John
On 22/02/2021 17:52, Erik, PA0ESH
wrote:
toggle quoted message
Show quoted text
As a newbe i can't
seem to find the latest stand alone fIrmWare for the PI Teensy TNC
. I run version 6 and have some issues.
can someone point me to the location of the hex file or source
code.
73's. Erik, PA0ESH
|
Re: TeensyPI 9K6 as a HAT
As a newbe i can't seem to find the latest stand alone fIrmWare for the PI Teensy TNC . I run version 6 and have some issues.
can someone point me to the location of the hex file or source code.
73's. Erik, PA0ESH
|
Re: ts-590s bpq32 windows
|
Re: ts-590s bpq32 windows
I found a guideline for the ts590s running ft8 , and followed those recommendations on setting up the menu
items .
Ray N3HYM
|
Re: ts-590s bpq32 windows
|
Re: Supporting multiple CM108 devices
#linbpq
This document should help:
On Sun, Feb 21, 2021 at 12:32 AM Dafcho Tabakov < lz1daf@...> wrote: Hi Doug,
Could you share some knowledge how to run VARA on Linux, please? I've
made attempts using wine but I got stuck. I am sure it's necessary to
make some library replacement using winetricks.
On 26.01.21 г. 18:35, Doug Kingston wrote:
> VARAFM is running under Wine and I am using VNC for remote windowing
> access.? I had to make one tweak to Wine to make the USB devices more
> distinguishable (adding card # into the descriptive string). This is
> only an issue because I have 2 instances of VARAFM running on the same
> computer.? I will be submitting this back to the Wine project in the
> near future.
> Otherwise it runs out of the box on a modern version of
> Wine (32-bit).? I have an automated install based on Debian Buster.
>
> I was pleasantly surprised.
>
> -Doug-
>
>
--
73 Daff, LZ1DAF
|
Re: linbpq terminal window scrolling
Ok, Carmine.
Interesting, as Chrome works fine here.
Have you seen the QtTermTCP docs? -?
73,
John
On 20/02/2021 23:40, Carmine Prestia
wrote:
toggle quoted message
Show quoted text
John:
On Sat, Feb 20, 2021 at 03:49 AM, John G8BPQ wrote:
It used to be a problem with some browsers, but I
thought I'd fixed it - it seems ok with the ones I use here.
Which browser are you using?
Chrome.
The Terminal in the Web interface isn't really
intended for regular use, just occasional troubleshooting. There
are much better terminal programs, eg QtTermTCP.
I was researching that earlier today and have to figure out how to
install it.? Another local ham is using it and has had good
success.
Thanks.
73 Carmine, K3CWP
|
Re: Supporting multiple CM108 devices
#linbpq
Hi Doug,
Could you share some knowledge how to run VARA on Linux, please? I've made attempts using wine but I got stuck. I am sure it's necessary to make some library replacement using winetricks.
toggle quoted message
Show quoted text
On 26.01.21 г. 18:35, Doug Kingston wrote: VARAFM is running under Wine and I am using VNC for remote windowing
access. I had to make one tweak to Wine to make the USB devices more
distinguishable (adding card # into the descriptive string). This is
only an issue because I have 2 instances of VARAFM running on the same
computer. I will be submitting this back to the Wine project in the
near future.
Otherwise it runs out of the box on a modern version of
Wine (32-bit). I have an automated install based on Debian Buster.
I was pleasantly surprised.
-Doug-
--
73 Daff, LZ1DAF
|
Anyone running a TS590S with bpq32 windows ver .26 !
What menu settings have to be changed or turned on in the radio ?
TNX
Ray N3HYM
|
Re: linbpq terminal window scrolling
John:
toggle quoted message
Show quoted text
On Sat, Feb 20, 2021 at 03:49 AM, John G8BPQ wrote:
It used to be a problem with some browsers, but I thought I'd fixed it - it seems ok with the ones I use here. Which browser are you using?
Chrome.
The Terminal in the Web interface isn't really intended for regular use, just occasional troubleshooting. There are much better terminal programs, eg QtTermTCP.
I was researching that earlier today and have to figure out how to install it.? Another local ham is using it and has had good success. Thanks. 73 Carmine, K3CWP
|
Re: You need to be signed in to save changes
Ok, I'll check into that and see if I can find what could cause it.
Thanks,
John
On 20/02/2021 18:07, K5DAT wrote:
toggle quoted message
Show quoted text
OK, I fleshed it out further.? The problem is only with
Port 1.? I can save changes on other ports.
Screenshot of how it looks before attempting to change:
Then edited the path (replaced KB9PVH-7 with KB9UNZ-7) and
clicked Save.
What I didn't notice previously is it changed to show Port
0 !
Then when I go back to Ports and click Beacons for port 1
it looks the same as where I started.? This is when accessing
locally via 127.0.0.1, but I don't think it matters whether I
am local or remote.
I suspect I did something to the configuration somewhere a
long time ago that caused this.
73,
Lee K5DAT
The message is warning you that you need to be signed
in - it isn't saying you aren't signed in. So long as you
are on 127.0.0.1 or signed it it will save. If not, you
get an error message "Not authorized - please sign in"
when you try to save.
At least that is what happens here!
73,
John
On 20/02/2021 17:02, K5DAT wrote:
In PiLinBPQ in the web interface when I select
"Ports" and then "Beacons" on any port, I get the
message above saying I need to be signed in to save
changes. I get this message even after signing in as
the sysop.? I also get it when I am on the host
computer web browsing to 127.0.0.1 where no signing
is normally required. I am not able to save any
changes made to the beacons.? The only way I can
change them is to edit the UIUtil.cfg file.
This issue has been there for a long time - has
not changed through several upgrades. I've been
working around it by editing the file, but it would
be nice to be able to do it the easy way.
Thanks,
Lee K5DAT
|
Re: You need to be signed in to save changes
OK, I fleshed it out further.? The problem is only with Port 1.? I can save changes on other ports.
Screenshot of how it looks before attempting to change:
Then edited the path (replaced KB9PVH-7 with KB9UNZ-7) and clicked Save.
What I didn't notice previously is it changed to show Port 0 !
Then when I go back to Ports and click Beacons for port 1 it looks the same as where I started.? This is when accessing locally via 127.0.0.1, but I don't think it matters whether I am local or remote.
I suspect I did something to the configuration somewhere a long time ago that caused this.
73, Lee K5DAT
The message is warning you that you need to be signed in - it isn't
saying you aren't signed in. So long as you are on 127.0.0.1 or
signed it it will save. If not, you get an error message "Not
authorized - please sign in" when you try to save.
At least that is what happens here!
73,
John
On 20/02/2021 17:02, K5DAT wrote:
In PiLinBPQ in the web interface when I select "Ports" and
then "Beacons" on any port, I get the message above saying I
need to be signed in to save changes. I get this message even
after signing in as the sysop.? I also get it when I am on the
host computer web browsing to 127.0.0.1 where no signing is
normally required. I am not able to save any changes made to
the beacons.? The only way I can change them is to edit the
UIUtil.cfg file.
This issue has been there for a long time - has not changed
through several upgrades. I've been working around it by
editing the file, but it would be nice to be able to do it the
easy way.
Thanks,
Lee K5DAT
|
Re: You need to be signed in to save changes
The message is warning you that you need to be signed in - it isn't
saying you aren't signed in. So long as you are on 127.0.0.1 or
signed it it will save. If not, you get an error message "Not
authorized - please sign in" when you try to save.
At least that is what happens here!
73,
John
On 20/02/2021 17:02, K5DAT wrote:
toggle quoted message
Show quoted text
In PiLinBPQ in the web interface when I select "Ports" and
then "Beacons" on any port, I get the message above saying I
need to be signed in to save changes. I get this message even
after signing in as the sysop.? I also get it when I am on the
host computer web browsing to 127.0.0.1 where no signing is
normally required. I am not able to save any changes made to
the beacons.? The only way I can change them is to edit the
UIUtil.cfg file.
This issue has been there for a long time - has not changed
through several upgrades. I've been working around it by
editing the file, but it would be nice to be able to do it the
easy way.
Thanks,
Lee K5DAT
|
You need to be signed in to save changes
In PiLinBPQ in the web interface when I select "Ports" and then "Beacons" on any port, I get the message above saying I need to be signed in to save changes. I get this message even after signing in as the sysop.? I also get it when I am on the host computer web browsing to 127.0.0.1 where no signing is normally required. I am not able to save any changes made to the beacons.? The only way I can change them is to edit the UIUtil.cfg file.
This issue has been there for a long time - has not changed through several upgrades. I've been working around it by editing the file, but it would be nice to be able to do it the easy way.
Thanks, Lee K5DAT
|
Re: BPQ32 beacon only transmits on AXIP port
HI Ray, Looks like that did the trick. Thanks --Brian WD9HXC ? Sent from for Windows 10 ?
toggle quoted message
Show quoted text
From: Ray AdkinsSent: Saturday, February 20, 2021 9:25 AM To: [email protected]Subject: Re: [bpq32] BPQ32 beacon only transmits on AXIP port ? In my bpq32 windows version
Go to bpq32 console, click windows, click beacon configuration
Ray N3HYM
|
Re: BPQ32 beacon only transmits on AXIP port
I just tested it and it did transmit when I clicked test, so far so goods ? Sent from for Windows 10 ?
toggle quoted message
Show quoted text
From: Ray AdkinsSent: Saturday, February 20, 2021 9:25 AM To: [email protected]Subject: Re: [bpq32] BPQ32 beacon only transmits on AXIP port ? In my bpq32 windows version
Go to bpq32 console, click windows, click beacon configuration
Ray N3HYM
|
Re: BPQ32 beacon only transmits on AXIP port
Hi Ray, I just set it up to go in 10 minutes based on your suggestion. I will let you know the results in 10 minutes or so. ? ? Thanks, --Brian WD(HXC ? Sent from for Windows 10 ?
toggle quoted message
Show quoted text
From: Ray AdkinsSent: Saturday, February 20, 2021 9:25 AM To: [email protected]Subject: Re: [bpq32] BPQ32 beacon only transmits on AXIP port ? In my bpq32 windows version
Go to bpq32 console, click windows, click beacon configuration
Ray N3HYM
|
Re: BPQ32 beacon only transmits on AXIP port
In my bpq32 windows version
Go to bpq32 console, click windows, click beacon configuration
Ray N3HYM
|
pa0esh
Ray Adkins
Troy - K4JDA
