Re: You need to be signed in to save changes
OK, I fleshed it out further.? The problem is only with Port 1.? I can save changes on other ports.
Screenshot of how it looks before attempting to change:
Then edited the path (replaced KB9PVH-7 with KB9UNZ-7) and clicked Save.
What I didn't notice previously is it changed to show Port 0 !
Then when I go back to Ports and click Beacons for port 1 it looks the same as where I started.? This is when accessing locally via 127.0.0.1, but I don't think it matters whether I am local or remote.
I suspect I did something to the configuration somewhere a long time ago that caused this.
73, Lee K5DAT
The message is warning you that you need to be signed in - it isn't
saying you aren't signed in. So long as you are on 127.0.0.1 or
signed it it will save. If not, you get an error message "Not
authorized - please sign in" when you try to save.
At least that is what happens here!
73,
John
On 20/02/2021 17:02, K5DAT wrote:
In PiLinBPQ in the web interface when I select "Ports" and
then "Beacons" on any port, I get the message above saying I
need to be signed in to save changes. I get this message even
after signing in as the sysop.? I also get it when I am on the
host computer web browsing to 127.0.0.1 where no signing is
normally required. I am not able to save any changes made to
the beacons.? The only way I can change them is to edit the
UIUtil.cfg file.
This issue has been there for a long time - has not changed
through several upgrades. I've been working around it by
editing the file, but it would be nice to be able to do it the
easy way.
Thanks,
Lee K5DAT
|
Re: You need to be signed in to save changes
The message is warning you that you need to be signed in - it isn't
saying you aren't signed in. So long as you are on 127.0.0.1 or
signed it it will save. If not, you get an error message "Not
authorized - please sign in" when you try to save.
At least that is what happens here!
73,
John
On 20/02/2021 17:02, K5DAT wrote:
toggle quoted message
Show quoted text
In PiLinBPQ in the web interface when I select "Ports" and
then "Beacons" on any port, I get the message above saying I
need to be signed in to save changes. I get this message even
after signing in as the sysop.? I also get it when I am on the
host computer web browsing to 127.0.0.1 where no signing is
normally required. I am not able to save any changes made to
the beacons.? The only way I can change them is to edit the
UIUtil.cfg file.
This issue has been there for a long time - has not changed
through several upgrades. I've been working around it by
editing the file, but it would be nice to be able to do it the
easy way.
Thanks,
Lee K5DAT
|
You need to be signed in to save changes
In PiLinBPQ in the web interface when I select "Ports" and then "Beacons" on any port, I get the message above saying I need to be signed in to save changes. I get this message even after signing in as the sysop.? I also get it when I am on the host computer web browsing to 127.0.0.1 where no signing is normally required. I am not able to save any changes made to the beacons.? The only way I can change them is to edit the UIUtil.cfg file.
This issue has been there for a long time - has not changed through several upgrades. I've been working around it by editing the file, but it would be nice to be able to do it the easy way.
Thanks, Lee K5DAT
|
Re: BPQ32 beacon only transmits on AXIP port
HI Ray, Looks like that did the trick. Thanks --Brian WD9HXC ? Sent from for Windows 10 ?
toggle quoted message
Show quoted text
From: Ray AdkinsSent: Saturday, February 20, 2021 9:25 AM To: [email protected]Subject: Re: [bpq32] BPQ32 beacon only transmits on AXIP port ? In my bpq32 windows version
Go to bpq32 console, click windows, click beacon configuration
Ray N3HYM
|
Re: BPQ32 beacon only transmits on AXIP port
I just tested it and it did transmit when I clicked test, so far so goods ? Sent from for Windows 10 ?
toggle quoted message
Show quoted text
From: Ray AdkinsSent: Saturday, February 20, 2021 9:25 AM To: [email protected]Subject: Re: [bpq32] BPQ32 beacon only transmits on AXIP port ? In my bpq32 windows version
Go to bpq32 console, click windows, click beacon configuration
Ray N3HYM
|
Re: BPQ32 beacon only transmits on AXIP port
Hi Ray, I just set it up to go in 10 minutes based on your suggestion. I will let you know the results in 10 minutes or so. ? ? Thanks, --Brian WD(HXC ? Sent from for Windows 10 ?
toggle quoted message
Show quoted text
From: Ray AdkinsSent: Saturday, February 20, 2021 9:25 AM To: [email protected]Subject: Re: [bpq32] BPQ32 beacon only transmits on AXIP port ? In my bpq32 windows version
Go to bpq32 console, click windows, click beacon configuration
Ray N3HYM
|
Re: BPQ32 beacon only transmits on AXIP port
In my bpq32 windows version
Go to bpq32 console, click windows, click beacon configuration
Ray N3HYM
|
Re: BPQ32 beacon only transmits on AXIP port
I tried to use the web browser using 127.0.0.1:8080 and I get an error says : Access Error: 404 -- Not FoundCannot locate document: / ? I am not sure why that’s not working. ? Thanks, --Brian ? Sent from for Windows 10 ?
toggle quoted message
Show quoted text
From: John G8BPQSent: Saturday, February 20, 2021 9:07 AM To: [email protected]Subject: Re: [bpq32] BPQ32 beacon only transmits on AXIP port ? What type of HF port are you using? Not all support beaconing.
73,
John On 20/02/2021 13:47, Brian Vodvarka wrote: Hello,
I am having an issue where my beacon only transmits on AXIP. Is there script in the cfg file I need to massage to make it work on my HF port (port 1) .
Thanks,
Brian WD9HXC
?
|
Re: BPQ32 beacon only transmits on AXIP port
Hi John, The port is to the UZ7HO sound modem. Thanks, --Brian ? Sent from for Windows 10 ?
toggle quoted message
Show quoted text
From: John G8BPQSent: Saturday, February 20, 2021 9:07 AM To: [email protected]Subject: Re: [bpq32] BPQ32 beacon only transmits on AXIP port ? What type of HF port are you using? Not all support beaconing.
73,
John On 20/02/2021 13:47, Brian Vodvarka wrote: Hello,
I am having an issue where my beacon only transmits on AXIP. Is there script in the cfg file I need to massage to make it work on my HF port (port 1) .
Thanks,
Brian WD9HXC
?
|
Re: BPQ32 beacon only transmits on AXIP port
What type of HF port are you using? Not all support beaconing.
73,
John
On 20/02/2021 13:47, Brian Vodvarka
wrote:
toggle quoted message
Show quoted text
Hello,
I am having an issue where my beacon only transmits on AXIP. Is
there script in the cfg file I need to massage to make it work on
my HF port (port 1) .
Thanks,
Brian WD9HXC
|
Re: BPQ32 beacon only transmits on AXIP port
toggle quoted message
Show quoted text
On Sat, Feb 20, 2021, 8:29 AM Ken < ken@...> wrote:
I'll send you something off list in a few minutes.
Ken W9GM
On 2/20/2021 8:12 AM, Brian Vodvarka
wrote:
Hi Ken,
The web version is not working for me for some
reason, so I set the timings in the cfg file, but it does not
seem to have any effect on it.?
The hf port works as I can connect and
transmit...etc, just can't get the beacon to send on any port
but axip.
Thanks,
--Brian
On Sat, Feb 20, 2021, 8:04
AM Ken < ken@...>
wrote:
Hi Brian,
Your BTINTERVAL or IDINTERVAL? may not be set in the
config file.
I recommend you set your Beacons up in Web Node under
Ports.
That way you can change them on the fly without
rebooting
BPQ.
I have both my BTINTERVAL and IDINTERVAL set to 0 in the
config
file, then use the Port > Beacon setup.
73,
Ken W9GM
On 2/20/2021 7:47 AM, Brian Vodvarka wrote:
Hello,
I am having an issue where my beacon only transmits on
AXIP. Is there script in the cfg file I need to
massage to make it work on my HF port (port 1) .
Thanks,
Brian WD9HXC
|
Re: BPQ32 beacon only transmits on AXIP port
I'll send you something off list in a few minutes.
Ken W9GM
On 2/20/2021 8:12 AM, Brian Vodvarka
wrote:
toggle quoted message
Show quoted text
Hi Ken,
The web version is not working for me for some
reason, so I set the timings in the cfg file, but it does not
seem to have any effect on it.?
The hf port works as I can connect and
transmit...etc, just can't get the beacon to send on any port
but axip.
Thanks,
--Brian
On Sat, Feb 20, 2021, 8:04
AM Ken < ken@...>
wrote:
Hi Brian,
Your BTINTERVAL or IDINTERVAL? may not be set in the
config file.
I recommend you set your Beacons up in Web Node under
Ports.
That way you can change them on the fly without
rebooting
BPQ.
I have both my BTINTERVAL and IDINTERVAL set to 0 in the
config
file, then use the Port > Beacon setup.
73,
Ken W9GM
On 2/20/2021 7:47 AM, Brian Vodvarka wrote:
Hello,
I am having an issue where my beacon only transmits on
AXIP. Is there script in the cfg file I need to
massage to make it work on my HF port (port 1) .
Thanks,
Brian WD9HXC
|
Re: BPQ32 beacon only transmits on AXIP port
Hi Ken, The web version is not working for me for some reason, so I set the timings in the cfg file, but it does not seem to have any effect on it.? The hf port works as I can connect and transmit...etc, just can't get the beacon to send on any port but axip.
Thanks, --Brian
On Sat, Feb 20, 2021, 8:04 AM Ken < ken@...> wrote:
Hi Brian,
Your BTINTERVAL or IDINTERVAL? may not be set in the config file.
I recommend you set your Beacons up in Web Node under Ports.
That way you can change them on the fly without rebooting
BPQ.
I have both my BTINTERVAL and IDINTERVAL set to 0 in the config
file, then use the Port > Beacon setup.
73,
Ken W9GM
On 2/20/2021 7:47 AM, Brian Vodvarka
wrote:
Hello,
I am having an issue where my beacon only transmits on AXIP. Is
there script in the cfg file I need to massage to make it work on
my HF port (port 1) .
Thanks,
Brian WD9HXC
|
Re: BPQ32 beacon only transmits on AXIP port
Hi Brian,
Your BTINTERVAL or IDINTERVAL? may not be set in the config file.
I recommend you set your Beacons up in Web Node under Ports.
That way you can change them on the fly without rebooting
BPQ.
I have both my BTINTERVAL and IDINTERVAL set to 0 in the config
file, then use the Port > Beacon setup.
73,
Ken W9GM
On 2/20/2021 7:47 AM, Brian Vodvarka
wrote:
toggle quoted message
Show quoted text
Hello,
I am having an issue where my beacon only transmits on AXIP. Is
there script in the cfg file I need to massage to make it work on
my HF port (port 1) .
Thanks,
Brian WD9HXC
|
BPQ32 beacon only transmits on AXIP port
Hello,
I am having an issue where my beacon only transmits on AXIP. Is there script in the cfg file I need to massage to make it work on my HF port (port 1) .
Thanks,
Brian WD9HXC
|
On 2/19/21 2:09 PM, John G8BPQ wrote: Set QUALITY=0 on the APRS port.
You can't selectively disable ID frames, you can only turn off for the whole system (by setting IDINTERVAL=0).
73,
John
Thank you, John. That's it. PS: Shame on me, if I have looked into bpq,cfg more thoroughly, I would have found resolutions for both things explained there. Misko YT7MPB On 19/02/2021 11:52, Misko YT7MPB wrote:
Hello,
I want to 'advertise' a local VHF packet node & BBS (running on 144.875 MHz) by adding another VHF port on 144.800 MHz (APRS-only) where I just want it to send APRS beacons (GPS position) once per hour, as well as to receive local APRS traffic and plot it on the map.
What I do not want is that new port sends nodes broadcast and node IDs, as those two add unnecessary traffic on the APRS channel. So how to stop the new port to behave as 'regular' node/bbs port? (I added to my config the port params from the APRS sample, and it does send GPS location to the map. But as I said, nodes broadcast and station ID are not wanted.
Misko YT7MPB
|
Re: linbpq terminal window scrolling
It used to be a problem with some browsers, but I thought I'd fixed
it - it seems ok with the ones I use here. Which browser are you
using?
The Terminal in the Web interface isn't really intended for regular
use, just occasional troubleshooting. There are much better terminal
programs, eg QtTermTCP.
73,
John
On 20/02/2021 03:42, Carmine Prestia
wrote:
toggle quoted message
Show quoted text
I have used the terminal in linbpq.? However it exhibits some
strange behavior.
Every time I enter something in the command line at the bottom of
the terminal or the terminal receives some data the window returns
to the top with multiple lines of Scroll To The End.
This continues throughout the use of the terminal.? I have to
continually scroll down to read the new data.
Has anyone else experienced this?
Thank you.
73 Carmine, K3CWP
|
linbpq terminal window scrolling
I have used the terminal in linbpq.? However it exhibits some strange behavior.
Every time I enter something in the command line at the bottom of the terminal or the terminal receives some data the window returns to the top with multiple lines of Scroll To The End.
This continues throughout the use of the terminal.? I have to continually scroll down to read the new data.
Has anyone else experienced this?
Thank you.
73 Carmine, K3CWP
|
Re: New bpq32 install connection refused
On Thu, Feb 18, 2021 at 03:21 AM, John G8BPQ wrote:
Ctrl/C closes linbpq. Closing the window doesn't.
Ok, I'll remember that. It appears I have linbpq running on the Pi.? Several other area hams have connected to my BBS.? Even though I still don't understand much of this this is progress. Thanks for the help, I'll be back. 73 Carmine, K3CWP
|
Re: Disconnect not recognized
John, I upgraded to the latest beta and all now works as expected. ? 73 Jim KY2D ? ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of John G8BPQ Sent: Thursday, February 18, 2021 08:25 To: [email protected]Subject: Re: [bpq32] Disconnect not recognized ? Could you send me the BBS log showing the failed connect attempt?
Also it might be worth trying the latest Beta version of BPQMail.exe.
Thanks,
John On 17/02/2021 16:40, Jim KY2D wrote: I recently upgraded to Windows BPQ 6.0.21.1 and find frequently that after a connect attempt fails or a connection is dropped, BPQ thinks the connection is still active. When attempting to manually initiate ?another forwarding session, even several minutes after the prior attempt, BPQ returns “already connected.” Also, looking at the “disconnect” on the console, the failed station is listed several times. ? Has anyone seen this issue? Any solutions? ? TNX 73 Jim KY2D ? ? ?
?
|
Ray Adkins
