¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Bpq32
  2. Messages
Expanded Topics Messages
Date
APRS-IS Stream

 

Good evening
?
I am using Direwolf with linbpq as an APRS setup. However, not seeing the inet stream in direwolf, nor are stations populating on the aprs map from the bpq server.
?
Here's what I have -
ISHost=rotate.aprs2.net ? ?; APRS-IS Host Name. May be either an IPV4 or an IPV6 Host
?ISPort=14580 ? ? ? ? ? ? ? ?; Normal port for a filtered feed
?ISPasscode=8334 ? ? ? ? ? ?; If you don't already have a passcode I can issue you one.
?;
?; You can specify a filter command to be sent when you log on to APRS-IS. Normally you don't
?; need one. The APRS Mapping Application (BPQAPRS) sets a filter when it starts,
?; and if you aren't running an APRS application, there isn't much point in getting info from APRS-IS
?;
?ISFilter=m/64?
?;GateLocalDistance=0
?;GATEDPATH 3=APRS
?LOGAPRSIS=1
?
6.0.24.71 Segfault

 

John,

I just noticed an unexpected restart for the #USWST chat hub. There are no RF ports on this system. The only 2 ports are AXIP and Telnet. It is a Debian Bookworm 12.10 x64 based vpn updated just a few days ago.

The following is from the console. The first 3 lines are from my wrapper script but note the time is in PDT so for the moment is -7 hrs from UTC... also note that the executable was stripped after compile so I am guessing what follows may not be much help. I will rerun a non-stripped copy and if necessary via gdb if needed.

**
* LinBPQ restart - 20250518200601
**
G8BPQ AX25 Packet Switch System Version 6.0.24.71 April 2025
Copyright?? 2001-2025 John Wiseman G8BPQ
Current Directory is /home/linbpq/linbpq
Log Directory is /home/linbpq/linbpq
Making Directory /home/linbpq/linbpq/logs
Configuration file Preprocessor.
Using Configuration file /home/linbpq/linbpq/bpq32.cfg
Conversion (probably) successful

PORTS 0x55f9b7982e60 LINKS 0x55f9b7984ea0 DESTS 0x55f9b798aea0 ROUTES 0x55f9b7993b40 L4 0x55f9b7995940 BUFFERS 0x55f9b799e980

Initialising Port 01???? AXIP
Initialising Port 02???? Telnet Server
MQTT Enabled 0
Starting Chat
Config File is /home/linbpq/linbpq/chatconfig.cfg
Chat Started
slave device: /dev/pts/0. symlink to /tmp/bpqtnc2 created
TNC Emulator Init Complete

SIGSEGV Received
./linbpq(+0x13b28c)[0x55f9b785628c]
/lib/x86_64-linux-gnu/libc.so.6(+0x3c050)[0x7ffaa225b050]
/lib/x86_64-linux-gnu/libc.so.6(+0xa9d76)[0x7ffaa22c8d76]
/lib/x86_64-linux-gnu/libc.so.6(+0x5e258)[0x7ffaa227d258]
/lib/x86_64-linux-gnu/libc.so.6(+0x7e758)[0x7ffaa229d758]
./linbpq(+0x1a15ee)[0x55f9b78bc5ee]
./linbpq(+0x1a5861)[0x55f9b78c0861]
./linbpq(+0x1a58ae)[0x55f9b78c08ae]
./linbpq(+0x1a6029)[0x55f9b78c1029]
./linbpq(+0x1a9754)[0x55f9b78c4754]

SIGSEGV Received
./linbpq(+0x13b28c)[0x55f9b785628c]
/lib/x86_64-linux-gnu/libc.so.6(+0x3c050)[0x7ffaa225b050]
/lib/x86_64-linux-gnu/libc.so.6(+0xa9d76)[0x7ffaa22c8d76]
/lib/x86_64-linux-gnu/libc.so.6(+0x5e258)[0x7ffaa227d258]
/lib/x86_64-linux-gnu/libc.so.6(+0x7e758)[0x7ffaa229d758]
./linbpq(+0x1a15ee)[0x55f9b78bc5ee]
./linbpq(+0x1a5861)[0x55f9b78c0861]
./linbpq(+0x1a58ae)[0x55f9b78c08ae]
./linbpq(+0x1a6029)[0x55f9b78c1029]
./linbpq(+0x1a9754)[0x55f9b78c4754]

Tnx es 73 de Rich WA3WLH
Re: Need UHF radio

 

Tait TM8105

Jason Rausch K4APR
www.ke4nyv.com


On Wednesday, May 21, 2025 at 07:38:06 AM EDT, dtmenges@... via groups.io <dtmenges@...> wrote:


Looking to add a UHF port to our LinBPOQ site. Any recommendations, either for or against, for a used radio? Running a Kenwood TM-271 for VHF.
?
Dave Menges
Re: Slackware 15 Build Fail

 

Yes, that is helpful. A suggestion for the document would be a quick
mention about either making symbolic links from library.so to
library.a for Slackware, or any other platform that uses shared object
libraries. Or editing the makefile changing .a depends to .so. I
almost forgot about that when compiling this last time.

Thanks, John.
Chris KQ6UP

On Tue, May 20, 2025 at 10:25?PM John G8BPQ via groups.io
<john.wiseman@...> wrote:

Have you seen



It details the latest dependencies and info on building without MQTT support and building libpaho-mqtt-dev if it is not included in your system.

73,
John



On 21/05/2025 02:36, Chris Maness KQ6UP via groups.io wrote:

Trying to get the latest and greatest, since it has been a while since
I compiled a fresh binary on my slackware box. Looks like it is
looking for a library related to The Internet of Things client
"libpaho-mqtt3a" (or at least the library for it). I am thinking this
is a new dependency that does not come bundled with Slackware 15.
Unfortunately not in the Slackbuilds 3rd party repo.

gcc -DLINBPQ -MMD -g -rdynamic -fcommon -fasynchronous-unwind-tables
-c -o RHP.o RHP.c

gcc pngwtran.o pngrtran.o pngset.o pngrio.o pngwio.o pngtrans.o
pngrutil.o pngwutil.o pngread.o pngwrite.o png.o pngerror.o pngget.o
pngmem.o APRSIconData.o AISCommon.o upnp.o APRSStdPages.o HSMODEM.o
WinRPR.o KISSHF.o TNCEmulators.o bpqhdlc.o SerialPort.o adif.o
WebMail.o utf8Routines.o VARA.o LzFind.o Alloc.o LzmaDec.o LzmaEnc.o
LzmaLib.o Multicast.o ARDOP.o IPCode.o FLDigi.o linether.o CMSAuth.o
APRSCode.o BPQtoAGW.o KAMPactor.o AEAPactor.o HALDriver.o MULTIPSK.o
BBSHTMLConfig.o ChatHTMLConfig.o BBSUtilities.o bpqaxip.o BPQINP3.o
BPQNRR.o cMain.o Cmd.o CommonCode.o HTMLCommonCode.o compatbits.o
config.o datadefs.o FBBRoutines.o HFCommon.o Housekeeping.o HTTPcode.o
kiss.o L2Code.o L3Code.o L4Code.o lzhuf32.o MailCommands.o
MailDataDefs.o LinBPQ.o MailRouting.o MailTCP.o MBLRoutines.o md5.o
Moncode.o NNTPRoutines.o RigControl.o TelnetV6.o WINMOR.o TNCCode.o
UZ7HODrv.o WPRoutines.o SCSTrackeMulti.o SCSPactor.o SCSTracker.o
HanksRT.o UIRoutines.o AGWAPI.o AGWMoncode.o DRATS.o FreeDATA.o
base64.o Events.o nodeapi.o mailapi.o mqtt.o RHP.o -Xlinker
-Map=output.map -l:libminiupnpc.so -lrt -lm -lz -l:libpaho-mqtt3a.a
-l:libjansson.a -lpthread -lconfig -lpcap -o linbpq

/usr/bin/ld: cannot find -l:libpaho-mqtt3a.a

/usr/bin/ld: cannot find -l:libjansson.a

collect2: error: ld returned 1 exit status

make: *** [makefile:35: linbpq] Error 1

Please advise :D






--
Thanks,
Chris Maness
SOLVED Re: [bpq32] QtSoundModem: error while loading shared libraries: libfftw3f.so.3:

 

¿ªÔÆÌåÓý

I was able to resolve it by building from source



On May 21, 2025, at 09:27, Robert Cartier via groups.io <kd1jg@...> wrote:


John

I downloaded the latest QtSoundModem and am getting the error of cant open object of

QtSoundModem: error while loading shared libraries: libfftw3f.so.3:


I installed all the libraries based on the webpage

Thanks in Advance



Ron - kd1jg





Robert Cartier
kd1jg@...
QtSoundModem: error while loading shared libraries: libfftw3f.so.3:

 

John

I downloaded the latest QtSoundModem and am getting the error of cant open object of

QtSoundModem: error while loading shared libraries: libfftw3f.so.3:


I installed all the libraries based on the webpage

Thanks in Advance



Ron - kd1jg
Need UHF radio

 

Looking to add a UHF port to our LinBPOQ site. Any recommendations, either for or against, for a used radio? Running a Kenwood TM-271 for VHF.
?
Dave Menges
Re: Sample LinBPQ Configuration

 

Thanks, Scott. My .cfg looks a lot like that.
?
I think one of the problems with configuration files is that some of them lean towards being a "how-to" for everything possible and the new SYSOP gets overwhelmed. Direwolf is the same way. Once I figured out that I didn't need it all, life got easier.
?
Just to be clear, I'm not complaining about the software developers doing this. They write code and BPQ and Direwolf are both complex programs. The company I retired from as a technical writer had several people to developed classroom training and? user assistance (help files) and it was a full-time job to keep up. And we were getting paid. The developers for this freeware that we enjoy are probably a one man show and do this as a service to the hobby.?
?
Not sure what the answer is but examples like Scott's should help the new user.
?
Dave Menges
Re: Slackware 15 Build Fail

 

¿ªÔÆÌåÓý

Have you seen



It details the latest dependencies and info on building without MQTT support and building libpaho-mqtt-dev if it is not included in your system.

73,
John



On 21/05/2025 02:36, Chris Maness KQ6UP via groups.io wrote:

Trying to get the latest and greatest, since it has been a while since
I compiled a fresh binary on my slackware box.  Looks like it is
looking for a library related to The Internet of Things client
"libpaho-mqtt3a" (or at least the library for it).  I am thinking this
is a new dependency that does not come bundled with Slackware 15.
Unfortunately not in the Slackbuilds 3rd party repo.

gcc -DLINBPQ -MMD -g -rdynamic -fcommon -fasynchronous-unwind-tables
-c -o RHP.o RHP.c

gcc pngwtran.o pngrtran.o pngset.o pngrio.o pngwio.o pngtrans.o
pngrutil.o pngwutil.o pngread.o pngwrite.o png.o pngerror.o pngget.o
pngmem.o APRSIconData.o AISCommon.o upnp.o APRSStdPages.o HSMODEM.o
WinRPR.o KISSHF.o TNCEmulators.o bpqhdlc.o SerialPort.o adif.o
WebMail.o utf8Routines.o VARA.o LzFind.o Alloc.o LzmaDec.o LzmaEnc.o
LzmaLib.o Multicast.o ARDOP.o IPCode.o FLDigi.o linether.o CMSAuth.o
APRSCode.o BPQtoAGW.o KAMPactor.o AEAPactor.o HALDriver.o MULTIPSK.o
BBSHTMLConfig.o ChatHTMLConfig.o BBSUtilities.o bpqaxip.o BPQINP3.o
BPQNRR.o cMain.o Cmd.o CommonCode.o HTMLCommonCode.o compatbits.o
config.o datadefs.o FBBRoutines.o HFCommon.o Housekeeping.o HTTPcode.o
kiss.o L2Code.o L3Code.o L4Code.o lzhuf32.o MailCommands.o
MailDataDefs.o LinBPQ.o MailRouting.o MailTCP.o MBLRoutines.o md5.o
Moncode.o NNTPRoutines.o RigControl.o TelnetV6.o WINMOR.o TNCCode.o
UZ7HODrv.o WPRoutines.o SCSTrackeMulti.o SCSPactor.o SCSTracker.o
HanksRT.o  UIRoutines.o AGWAPI.o AGWMoncode.o DRATS.o FreeDATA.o
base64.o Events.o nodeapi.o mailapi.o mqtt.o RHP.o -Xlinker
-Map=output.map -l:libminiupnpc.so -lrt -lm -lz -l:libpaho-mqtt3a.a
-l:libjansson.a -lpthread -lconfig -lpcap -o linbpq

/usr/bin/ld: cannot find -l:libpaho-mqtt3a.a

/usr/bin/ld: cannot find -l:libjansson.a

collect2: error: ld returned 1 exit status

make: *** [makefile:35: linbpq] Error 1

Please advise :D

Slackware 15 Build Fail

 

Trying to get the latest and greatest, since it has been a while since
I compiled a fresh binary on my slackware box. Looks like it is
looking for a library related to The Internet of Things client
"libpaho-mqtt3a" (or at least the library for it). I am thinking this
is a new dependency that does not come bundled with Slackware 15.
Unfortunately not in the Slackbuilds 3rd party repo.

gcc -DLINBPQ -MMD -g -rdynamic -fcommon -fasynchronous-unwind-tables
-c -o RHP.o RHP.c

gcc pngwtran.o pngrtran.o pngset.o pngrio.o pngwio.o pngtrans.o
pngrutil.o pngwutil.o pngread.o pngwrite.o png.o pngerror.o pngget.o
pngmem.o APRSIconData.o AISCommon.o upnp.o APRSStdPages.o HSMODEM.o
WinRPR.o KISSHF.o TNCEmulators.o bpqhdlc.o SerialPort.o adif.o
WebMail.o utf8Routines.o VARA.o LzFind.o Alloc.o LzmaDec.o LzmaEnc.o
LzmaLib.o Multicast.o ARDOP.o IPCode.o FLDigi.o linether.o CMSAuth.o
APRSCode.o BPQtoAGW.o KAMPactor.o AEAPactor.o HALDriver.o MULTIPSK.o
BBSHTMLConfig.o ChatHTMLConfig.o BBSUtilities.o bpqaxip.o BPQINP3.o
BPQNRR.o cMain.o Cmd.o CommonCode.o HTMLCommonCode.o compatbits.o
config.o datadefs.o FBBRoutines.o HFCommon.o Housekeeping.o HTTPcode.o
kiss.o L2Code.o L3Code.o L4Code.o lzhuf32.o MailCommands.o
MailDataDefs.o LinBPQ.o MailRouting.o MailTCP.o MBLRoutines.o md5.o
Moncode.o NNTPRoutines.o RigControl.o TelnetV6.o WINMOR.o TNCCode.o
UZ7HODrv.o WPRoutines.o SCSTrackeMulti.o SCSPactor.o SCSTracker.o
HanksRT.o UIRoutines.o AGWAPI.o AGWMoncode.o DRATS.o FreeDATA.o
base64.o Events.o nodeapi.o mailapi.o mqtt.o RHP.o -Xlinker
-Map=output.map -l:libminiupnpc.so -lrt -lm -lz -l:libpaho-mqtt3a.a
-l:libjansson.a -lpthread -lconfig -lpcap -o linbpq

/usr/bin/ld: cannot find -l:libpaho-mqtt3a.a

/usr/bin/ld: cannot find -l:libjansson.a

collect2: error: ld returned 1 exit status

make: *** [makefile:35: linbpq] Error 1

Please advise :D



--
Thanks,
Chris Maness
Re: Not all links show on web page

 

Attached is a pcap file that was taken while clicking the links link.

Truncated list (CLI showed 41, I believe)
image.png

Thanks,
Lee K5DAT


On Tue, May 20, 2025 at 1:01?AM John G8BPQ via <john.wiseman=[email protected]> wrote:
Would it be possible to get a packet trace of a truncated page? I use WIreshark.

Thanks,
John

_._,_._,_

links-cap.pcap
links-cap.pcap

Re: TCP Master/Slave question

 

¿ªÔÆÌåÓý

Yes, that is a recent change to AXTCP/UDP. An XID is sent before the SABM to attempt to negotiate an ax.25 V2.2 connection. If the other send replies with an XID response a SABM is then sent. AXTCP Master/Slave only selects which end established the TCP connection, not which end opens the ax.25 link.


On 20/05/2025 15:18, Mark Taylor wrote:

Those packet finally stopped at 56 past the hour.? They continued for 30 minutes and through several restarts.
?
Still curious about the XID packets.? It seems to be a change from previous versions.
?
?
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
Re: One user can send a message the other cannot.

 

Thanks John. I was looking for the setting then it struck me that I could use an RSL GE7TWZ for the responder mailbox and G7TWZ for my normal account.
Testing GE7TWZ with FBB seems to work. I'll have to play with a multi-forward routed message, when I get time.
Thanks again as ever,
73, Ray
?
On Tue, May 20, 2025 at 12:53 PM, John G8BPQ wrote:

BPQ will hold messages if it thinks the from call is invalid, though this can be disabled in the config.

73,
John
Re: TCP Master/Slave question

 

Those packet finally stopped at 56 past the hour.? They continued for 30 minutes and through several restarts.
?
Still curious about the XID packets.? It seems to be a change from previous versions.
?
?
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
TCP Master/Slave question

 

John,
?
As the TCP-SLAVE side of a connection I assumed that I would never initiate a connection. I am seeing the following:
?
13:35:48T N5MDT-13>N4NVD-3 Port=2 <XID C P> 2=21 3=22a486 RX Paclen=256 RX Window=7?
?
I have different ports for AXUDP (port 1) and AXTCP (port 2.)
The above line is obviously the Port 2 Monitor and it looks to me like it is a connection request being initiated by me.? However, I am seeing a similar line to a well established and connected AXTCP link to N3HYM.
?
?
Now, earlier today, I switched N4NVD from TCP (port 2) back to UDP (port 1) and restarted.? The UDP route is stable using port 1.? However, I am still seeing the above line in the port 2 monitor.
?
So, what exactly is the XID packet?? When should I expect to see these cease for N4NVD?
?
The axipcache1.cfg file contains only port 1 connections.? I do not see a port 2 cache file. Is there one that I can empty to stop these XID packets to N4NVD sooner than letting it time out on its own?
?
?
Thanks
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
Re: Not all links show on web page

 

I don't see why not. I should be able to capture it on the linux side with tcpdump in pcap format. I'll give that a whirl.

Lee K5DAT

On Tue, May 20, 2025 at 1:01?AM John G8BPQ via <john.wiseman=[email protected]> wrote:
Would it be possible to get a packet trace of a truncated page? I use WIreshark.

Thanks,
John

On 19/05/2025 23:12, Lee Bengston via wrote:
In this example (Firefox in Windows, and the latest .71 release of pilinbpq), the GUI shows the first 18 links of 41 total.
image.png

Sometimes when I click it again, I only get the first one.
image.png

And sometimes I get the full list.

image.png

The CLI list is shown below.

SHAWNO:K5DAT-7} Links

K5DAT-5 K5DAT-7 S=5 P=10 T=3 V=2 Q=0

N3HYM-5 K5DAT-7 S=1 P=3 T=3 V=2 Q=0

VE2PKT-4 K5DAT-7 S=5 P=3 T=3 V=2 Q=0

N9HWP-7 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

W0ARP-7 K5DAT-7 S=5 P=3 T=3 V=2 Q=0

WW2BSA-7 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

VK5LEX-3 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

GB7BED-5 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

PY2BIL-4 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

PA8F-2 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

WW6Q-7 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

KB9SOZ-7 K5DAT-7 S=6 P=3 T=3 V=2 Q=0

KE0GB-7 K5DAT-7 S=5 P=3 T=3 V=2 Q=0

VK3AT-1 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

KK4DIV-7 K5DAT-7 S=5 P=3 T=3 V=2 Q=0

N4NVD-3 K5DAT-7 S=5 P=10 T=3 V=2.2 Q=0

WA8RSA-5 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

W9GM-7 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

K7EK-6 K5DAT-7 S=5 P=10 T=3 V=2 Q=0

N5MDT-13 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

NC8Q-7 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

KB8OAK-7 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

N9PMO-2 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

SV1IW-12 K5DAT-7 S=5 P=3 T=3 V=2 Q=0

IW2OHX-15 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

KD9KGQ-7 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

W1DTX-7 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

N3FUD-7 K5DAT-7 S=5 P=10 T=3 V=2.2 Q=0

N9SEO-3 K5DAT-7 S=5 P=10 T=3 V=2.2 Q=0

KA0PND-7 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

WA3WLH-15 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

W7BMH-7 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

VE3CGR-7 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

K5GEO-5 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

KF5JRV-2 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

KC0GIS-7 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

PI1LAP-7 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

VE7GN-1 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

KB9PVH-7 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0

KQ6UP-9 K5DAT-7 S=5 P=10 T=3 V=2 Q=0

KD5TCY-2 K5DAT-7 S=5 P=3 T=3 V=2.2 Q=0


73,
Lee K5DAT
Re: One user can send a message the other cannot.

 

¿ªÔÆÌåÓý

BPQ will hold messages if it thinks the from call is invalid, though this can be disabled in the config.

73,
John

On 20/05/2025 10:32, razza30 via groups.io wrote:

Thanks, I suspected as much. I will have a play between BPQ systems and see how that goes.
?
On Tue, May 20, 2025 at 09:10 AM, John G8BPQ wrote:
GB7CIP is rejecting the message:

250519 20:44:16 >GB7CIP ? ?FA P WORPIN GB7CIP.#32.GBR.EURO PING 2498_GB7WOR 55
250519 20:44:16 >GB7CIP ? ?F> 33
250519 20:44:21 <GB7CIP ? ?FS R

I'm not familiar with FBB, but I suspect it is because WORPIN in not at valid callsign
Re: One user can send a message the other cannot.

 

Thanks, I suspected as much. I will have a play between BPQ systems and see how that goes.
?
On Tue, May 20, 2025 at 09:10 AM, John G8BPQ wrote:

GB7CIP is rejecting the message:

250519 20:44:16 >GB7CIP ? ?FA P WORPIN GB7CIP.#32.GBR.EURO PING 2498_GB7WOR 55
250519 20:44:16 >GB7CIP ? ?F> 33
250519 20:44:21 <GB7CIP ? ?FS R

I'm not familiar with FBB, but I suspect it is because WORPIN in not at valid callsign
Re: One user can send a message the other cannot.

 

Hi John,
I was hoping to have two traces where my BBS sent a good and a failed message for comparison. Unfortunately, the second trace was longer as GB7CIP sent me a message making them not quite comparable. You can ignore, as you are a trace reading expert! :-)
?
Ironically, it was his auto-reply system replying to the first (good) message I sent.
?
On Tue, May 20, 2025 at 09:15 AM, John G8BPQ wrote:

I'm not sure what you are saying here. Can you clarify?

Thanks,
John
Re: One user can send a message the other cannot.

 

¿ªÔÆÌåÓý

I'm not sure what you are saying here. Can you clarify?

Thanks,
John


On 19/05/2025 22:02, razza30 via groups.io wrote:

The rest of the second trace....
250519 20:44:29 |GB7CIP ? ?Uncompressing Message Comp Len 243 Msg Len 333 CRC 50a
250519 20:44:29 ?GB7CIP ? ?Msg 2499 Routing Trace To G7TWZ Via GB7WOR.#32.GBR.EURO
250519 20:44:29 ?GB7CIP ? ?Routing Trace Type P TO G7TWZ VIA GB7WOR.#32.GBR.EURO Route On WW EU GBR #32 GB7WOR
250519 20:44:29 ?GB7CIP ? ?SendPtoMultiple is set. Checking for best match level
250519 20:44:29 ?GB7CIP ? ?Routing Trace GB7WOR Matches implied AT GB7WOR
250519 20:44:29 ?GB7CIP ? ?Message matches this BBS and ForwardToMe not set - not queuing message
250519 20:44:30 >GB7CIP ? ?FF
250519 20:44:33 <GB7CIP ? ?FQ
250519 20:44:34 |GB7CIP ? ?GB7CIP Disconnected
?
Which is not as clean as I would like as GB7CIP is delivering a message to GB7WOR (me) also.
21 - 40 of 43814