Thank you everyone, Now have MH 1 working

?

All the best from Alan & Thank you all

Hi Steve

?

?As you may have seen to my reply to? mark, time to get leads done and connect a radio and tnc

?

and call the node myself...

?

all the best from Alan

Hi Mark,

?

I think the only way round this problem, is get the cables down to hook an other tnc to an other radio which I have

And prove it my self...

?

all the best from Alan

On Thu, Apr 10, 2025 at 07:25 AM, Alan - G0WDA wrote:

My Call Sign G0WDA - Location Blackpool UK - g0wda.co.uk

Ok then, I was way off...

?

Same applies. Use a monitor of some sort to actually see the traffic being decoded.? Once it is decoded then if it does not appear in the MHeard list you may really have something wrong.? If it is decoded then it *should* appear in the MHeard list.? I have no special command in the port configuration to make that happen.? I believe it just needs to be decoded. (Unless linbpq is way different in that respect from windows.)

?

--

73,

Mark, N5MDT

Montgomery, Texas

?

?

?

Alan

Thank you Danny

?

That would be most helpfull

?

All the best from Alan

On Thu, Apr 10, 2025 at 01:13 PM, Mark Taylor wrote:

Ok, now I know where you are the only thing close to you is VHF Packet on 145.01

Is that the frequency you are set to for this port?

?

?

Hi Mark, in the UK we use 144.9375

?

All the best from Alan

On Thu, Apr 10, 2025 at 01:07 PM, Mark Taylor wrote:

Knowing your call or location would help us with providing more info.? I didn't see either in earlier posts but I'll go back and take another look.

My Call Sign G0WDA - Location Blackpool UK - g0wda.co.uk

?

is there a signature I can add this into please.

?

All the best from Alan

On Thu, Apr 10, 2025 at 07:07 AM, Mark Taylor wrote:

Knowing your call or location would help us with providing more info.

Ok, now I know where you are the only thing close to you is VHF Packet on 145.01

Is that the frequency you are set to for this port?

?

--

73,

Mark, N5MDT

Montgomery, Texas

?

?

?

On Thu, Apr 10, 2025 at 06:40 AM, Alan wrote:

I have heard traffic a few times,

Ok, that's a start. Hearing something means that there are others transmitting on the same frequency you are listening to. ?Make sure you are listening on a common frequency for your area for the mode you are using. Look at RMS gateways that may be in your area for the frequency if you are not sure.

?

I don't know linbpq, but is there a monitor where you can SEE the traffic that you hear on VHF?? To know for sure your VHF port is decoding traffic you MUST be able to SEE the traffic. Not just hear it.?

If there is nothing else, you could use your http interface to your node, open a terminal, then use the LIS 1 command to monitor that port.

?

?

Knowing your call or location would help us with providing more info.? I didn't see either in earlier posts but I'll go back and take another look.

?

?

?

--

73,

Mark, N5MDT

Montgomery, Texas

?

?

?

On Thu, Apr 10, 2025 at 11:38 AM, Mark Taylor wrote:

Has anyone asked if you are receiving VHF traffic and is your device decoding the VHF traffic properly?

Have you made VHF connections using BPQ yet?

?

I have heard traffic a few times, i have a spare radio and tnc, but i can get 2 cables for them, and i cant make them
I have shaky hands..

?

?

All the best from Alan

?

Has anyone asked if you are receiving VHF traffic and is your device decoding the VHF traffic properly?

Have you made VHF connections using BPQ yet?

?

?

--

73,

Mark, N5MDT

Montgomery, Texas

?

?

?

On Wed, Apr 9, 2025 at 09:38 PM, Lee Bengston wrote:

By chance did you restart BPQ since the VHF stations were heard? I always lose the MH list after a restart.

Hi Lee,

?

? I only restart bpq when I do a mod too the bpq32.cfg file

?

All the best from Alan

Hi John,

?

? No the picture shows port 11 working and being listed

? Port 1 shows nothing

?

? Port 1 VHF Port

? Port 11 AXIP

? Port 12 Telnet

?

That is all I have...

?

All the best from Alan

Hi John,

?

? Missed half your question, if i use MH 5 which I dont have

? it comes up with Invalid Port

?

All the best from Alan

?

?

?