Re: I am looking for QTterm for MacOS on M-series processors
Apple provides a translator between Intel-based code and Apple Silicon. It is hidden from you but "just works'. It is much like Rosetta, in the olden days, when Apple switched from Motorola to Intel CPU.
?
Jim. KA7EHK
On 12/30/2024 2:16 PM PST Ben Kuhn via groups.io <ku0hn@...> wrote:
?
?
https://www.cantab.net/users/john.wiseman/Downloads/Beta/QtTermTCP.dmg
I think it's built for intel.Macs but it runs fine on my M1.
-------- Original Message --------
On 12/30/24 10:01 AM, Tadd KA2DEW in NC via groups.io wrote:
I am looking for precompiled version of QTterm for MacOS on Apple's M-series processors
Is there such available? ?
? Thanks! ??
?
de KA2DEW
?
|
Re: I am looking for QTterm for MacOS on M-series processors
https://www.cantab.net/users/john.wiseman/Downloads/Beta/QtTermTCP.dmg
I think it's built for intel.Macs but it runs fine on my M1.
-------- Original Message -------- On 12/30/24 10:01 AM, Tadd KA2DEW in NC via groups.io wrote: I am looking for precompiled version of QTterm for MacOS on Apple's M-series processors
Is there such available? ?
? Thanks! ??
?
de KA2DEW
?
|
I am looking for QTterm for MacOS on M-series processors
I am looking for precompiled version of QTterm for MacOS on Apple's M-series processors
Is there such available? ?
? Thanks! ??
?
de KA2DEW
?
|
Re: Winlink traffic stats
I found here. Thanks, Mark. 73 Em s¨¢b., 28 de dez. de 2024, 16:30, Mark Taylor via <mtaylor= [email protected]> escreveu:
On Sat, Dec 28, 2024 at 01:02 PM, Mauro Veiga wrote:
Where can I see these traffic stats in Winlink?
You should be able to see everything by logging into your account at Winlink.org
?
You should also have a CMS Log in your logs directory.
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
|
Re: Winlink traffic stats
On Sat, Dec 28, 2024 at 01:02 PM, Mauro Veiga wrote:
Where can I see these traffic stats in Winlink?
You should be able to see everything by logging into your account at Winlink.org
?
You should also have a CMS Log in your logs directory.
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
|
Re: Winlink traffic stats
Em sex., 27 de dez. de 2024, 04:54, John G8BPQ via <john.wiseman= [email protected]> escreveu:
As you have found, your system is working, but it isn't recording
any traffic stats within the Winlink system.
Where can I see these traffic stats in Winlink?
|
FBB reject.sys and file size
Speaking of the FBB reject.sys filters, how does the file size compare to the LEN value shown in Webmail?
?
Is 10,000 in the reject.sys entry for Max Size the same as the 10,000 LEN shown in the message list in Webmail, for example.
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
|
Thanks, John.? :-) Best regards.? Em s¨¢b., 28 de dez. de 2024, 11:37, John G8BPQ via <john.wiseman= [email protected]> escreveu:
Yes:
Mheard
port
Lists
stations heard recently on the specified port. Output can be
filtered with a partial callsign, eg MH 2 G8
There
are three variants of MH - MHV which lists in a more structured
(verbose) way, and MHU and MHL which display timestamps in clock
time (UTC or Local) instead of the default of time since last
heard.
A
user with SYSOP status can clear the list with the MH p CLEAR
command.
73, John
On 28/12/2024 13:06, Mauro Veiga via
wrote:
Ok, John.?Is there any command to clear the list?
Em s¨¢b., 28 de dez. de 2024,
09:58, John G8BPQ via <john.wiseman= [email protected]>
escreveu:
The list keeps the last 30 entries. If you hear fewer
than 30 stations on a port they will stay for ever unless
you clear the MH list.
73,
John
On 27/12/2024 20:25, Mauro Veiga via wrote:
Hi folks.?How long does Mheard list keep
data? Can it be modified?
TIA
|
Yes:
Mheard
port
Lists
stations heard recently on the specified port. Output can be
filtered with a partial callsign, eg MH 2 G8
There
are three variants of MH - MHV which lists in a more structured
(verbose) way, and MHU and MHL which display timestamps in clock
time (UTC or Local) instead of the default of time since last
heard.
A
user with SYSOP status can clear the list with the MH p CLEAR
command.
73, John
On 28/12/2024 13:06, Mauro Veiga via
groups.io wrote:
toggle quoted message
Show quoted text
Ok, John.?Is there any command to clear the list?
Em s¨¢b., 28 de dez. de 2024,
09:58, John G8BPQ via <john.wiseman= [email protected]>
escreveu:
The list keeps the last 30 entries. If you hear fewer
than 30 stations on a port they will stay for ever unless
you clear the MH list.
73,
John
On 27/12/2024 20:25, Mauro Veiga via wrote:
Hi folks.?How long does Mheard list keep
data? Can it be modified?
TIA
|
Ok, John.?Is there any command to clear the list? Em s¨¢b., 28 de dez. de 2024, 09:58, John G8BPQ via <john.wiseman= [email protected]> escreveu:
The list keeps the last 30 entries. If you hear fewer than 30
stations on a port they will stay for ever unless you clear the MH
list.
73,
John
On 27/12/2024 20:25, Mauro Veiga via
wrote:
Hi folks.?How long does Mheard list keep data? Can
it be modified?
TIA
|
The list keeps the last 30 entries. If you hear fewer than 30
stations on a port they will stay for ever unless you clear the MH
list.
73,
John
On 27/12/2024 20:25, Mauro Veiga via
groups.io wrote:
toggle quoted message
Show quoted text
Hi folks.?How long does Mheard list keep data? Can
it be modified?
TIA
|
Ok. Thanks, Chuck. 73. Em s¨¢b., 28 de dez. de 2024, 09:05, Chuck Gelm via <nc8q-aredn= [email protected]> escreveu:
On 12/27/24 15:25, Mauro Veiga via wrote:
> Hi folks.?How long does Mheard list keep data? Can it be modified?
>
> TIA
Hi, Mauro:
I think MHeard keeps the last 30 forever.
IDK. Perhaps it can be only modified in the source. :-|
73, Chuck
|
On 12/27/24 15:25, Mauro Veiga via groups.io wrote: Hi folks.?How long does Mheard list keep data? Can it be modified?
TIA Hi, Mauro: I think MHeard keeps the last 30 forever. IDK. Perhaps it can be only modified in the source. :-| 73, Chuck
|
Re: KA1VSC Packet to shut down
Hi, Matt:
Thank you for being a BBS SYSOP.
I wish you happiness in this Christmastime and joy in the new year.
73, Chuck
|
Re: Winlink Gateway question
Yes, is my RMS Sysop callsign. I created py1xta-10@... account and aparently solve the problem. Thanks, Jim, John, Mark, Chuck. Em s¨¢b., 28 de dez. de 2024, 05:50, Jim WB9QPM via <jhudson1= [email protected]> escreveu:
Did you request PY1XTA-10 when you sent the authorization to be a gateway?
I use the same CMSCALL as I use for WinlinkExpress. Same with CMSPASS and WinlinkExpress password.
I¡¯m missing something. Do you have multiple Winlink accounts?
What happens if you remove the -10 from CMSCALL?
I can't. It's my RMS Sysop call on Winlink.
|
Re: ARDOPCF and QtSoundModem?
Jeff
You need to point it to the dmix / dsnoop devices not the HW card. They are the virtual cards that can share.
73 Steve?
Wondering if anyone can help with my configuration to get VARA HF and QTSoundmodem to share a sound device.? I tried the John G8BPQ's .asoundrc config and only changed it for my hw:1,0 sound device since that's the device I need QTSoundmodem and VARA HF to share on my my Linux Mint machine.? Dmix and dsnoop are both installed.? But I can't get the sound device to share between VARA HF and QTSoundmodem.? They will each use the soundcard fine by themselves, but not when they are running simultaneously.? QTSoundmodem shows "hw:1,0" in its dropdown menu, which is the correct soundcard.?? Here's what running the QtSoundModem64 returns, , and below that is my /asoundrc file:
?
Playback Devices
Card 0, ID `PCH', name `HDA Intel PCH'
? Device hw:0,0 ID `CX8200 Analog', name `CX8200 Analog', 1 subdevices (1 available)
? ? 2 channels, ?sampling rate 48000..192000 Hz
? Device hw:0,3 ID `HDMI 0', name `HDMI 0', 1 subdevices (1 available)
? ? 2..8 channels, sampling rate 32000..192000 Hz
? Device hw:0,7 ID `HDMI 1', name `HDMI 1', 1 subdevices (1 available)
? ? 2..8 channels, sampling rate 32000..192000 Hz
? Device hw:0,8 ID `HDMI 2', name `HDMI 2', 1 subdevices (1 available)
? ? 2..8 channels, sampling rate 32000..192000 Hz
? Device hw:0,9 ID `HDMI 3', name `HDMI 3', 1 subdevices (1 available)
? ? 2..8 channels, sampling rate 32000..192000 Hz
? Device hw:0,10 ID `HDMI 4', name `HDMI 4', 1 subdevices (1 available)
? ? 2..8 channels, sampling rate 32000..192000 Hz
Card 1, ID `HF', name `C-Media USB Headphone Set'
? Device hw:1,0 ID `USB Audio', name `USB Audio', 1 subdevices (0 available)
Error -16 opening output device
Card 2, ID `Device', name `C-Media USB Audio Device'
? Device hw:2,0 ID `USB Audio', name `USB Audio', 1 subdevices (0 available)
Error -16 opening output device
Card 3, ID `VHF', name `C-Media USB Audio Device'
? Device hw:3,0 ID `USB Audio', name `USB Audio', 1 subdevices (0 available)
Error -16 opening output device
Card 4, ID `Device_2', name `C-Media USB Audio Device'
? Device hw:4,0 ID `USB Audio', name `USB Audio', 1 subdevices (0 available)
Error -16 opening output device
Opening Playback Device hw:1,0 USB Audio(C-Media USB Headphone Set) Rate 12000
Real Device plughw:1,0
cannot open playback audio device plughw:1,0 (Device or resource busy)
qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 1423, resource id: 9917682, major code: 40 (TranslateCoords), minor code: 0
?
And my .asoundrc contents:
?
pcm.dmix02 {
? ? type dmix
? ? ipc_key 60500
? ? ipc_key_add_uid true ? # let multiple users share
? ? ipc_perm 0666 ? ? ? ? ? # IPC permissions for multi-user sharing (octal, default 0600)
? ? slave {pcm "hw:1,0"}
}
pcm.dsnoop02 {
? ? type dsnoop
? ? ipc_key 5001
? ? ipc_key_add_uid true ? # let multiple users share
? ? ipc_perm 0666 ? ? ? ? ? # IPC permissions for multi-user sharing (octal, default 0600)
? ? slave {pcm "hw:1,0"}
}
# We need to define a plug linked to our dmix/dsnoop devices to do the rate conversion to 12000
pcm.mix02 {
? ? type plug
? ? slave.pcm "dmix02" # use our new PCM here
? ? hint.description "Mix for hw:1,0"}
pcm.snoop02 {
? ? type plug
? ? slave.pcm "dsnoop02" # use our new PCM here
? ? hint.description "Snoop for hw:1,0"}
?
?
?
?
?
?
|
Re: Winlink Gateway question
Did you request PY1XTA-10 when you sent the authorization to be a gateway?
I use the same CMSCALL as I use for WinlinkExpress. Same with CMSPASS and WinlinkExpress password.
I¡¯m missing something. Do you have multiple Winlink accounts?
toggle quoted message
Show quoted text
What happens if you remove the -10 from CMSCALL?
I can't. It's my RMS Sysop call on Winlink.
|
Re: Can't get into my html pages anymore....
Thank you.... that's useful and works slick!
Best,
j.
|
Hi folks.?How long does Mheard list keep data? Can it be modified?
TIA
|
Re: KA1VSC Packet to shut down
We all will be looking for you Matt Be safe and congratulations and thanks being one of us. Hello George Kirn had contact with this data.
I hope everyone had a Merry Christmas!
I am going to take?my system down on or around Feb 1 2025 to prepare?for a move.? My lease is expiring and we will be moving?to Maine temporarily to take care of elderly?parents that are in poor health, then off to Florida.
I do not plan to reactivate until I am permanently?relocated.
73 Matt KA1VSC
|
Tadd KA2DEW in NC
Mauro Veiga
N9PNO