Hi all,

I was snopping around into my partners' nodes and I found this:

BEDNOD:GB7BED-5} Version 6.0.24.33 (64 bit)?

Is there a 64bit version for Windows ? I did some reasearches in the mail archive, but I couldn't find anything related.
Thanks.
73 de iw2ohx

use crontab

@reboot /root/bpq/run.sh

--------

run.sh?
#!/bin/bash
#
cd /root/bpq
if pgrep -x "linbpq" > /dev/null
then
? ? kill $(pgrep -x "linbpq")
fi
sleep 10
./linbpq >/dev/null 2>/dev/null &

--------------

You can also do a linbpq restart every 6 hours

0 */6 * * * /root/bpq/run.sh

-----------------

There are many Linux distros that do not use systemd
The best option is to use crontab?

?

73

The other copy of linbpq that is running might have been started as a service.

Check /etc/systemd and look for any likely suspects. e.g. bpq.service or linbpq.service etc.

Also, run the following command.

systemctl list-units --type=service

You may need to scroll up/down the output to locate the instance.

Tom G0JSV

开云体育

As Todd has has mentioned Alias is limited to 6 char but it also can't include a - character.

Bind Error 98 almost always means you have another copy of linbpq running.

73,
John G8BPQ

I am in the planning stages of adding VARA to an up and running LinBPQ site that is using Direwolf for VHF. Our intention is to use a CAT controlled radio that has yet to be acquired. On my test system at home, I have VARA, Flrig, hamlib and of course Wine on a Pi 4B. I have successfully controlled my IC-7300 from a test version of LinBPQ running on a Pi 3. I have also used the same instance of VARA with Pat from other platforms, both Linux and Windows.

It would be simpler and less disruptive to add VARA to the live site by adding a second Pi with VARA and friends already configured. Then, all I would have to do is add the VARA Radio and Port to the existing version of LinBPQ. That leads to two questions:

• Is running separate platforms an acceptable solution? Is there and upside or downside or is this neutral other than expense.
• How do you autostart VARA, FLRIG and Hamlib? This has to be tackled regardless. I’m using the systemd method on our live site.

I appreciate the help I have recieved here in the past. This project is moving slowly because we don't have internet at the site but it is coming.

Dave Menges

Problem Solve.

73 de Jean

VA2OM / VE2PKT

On 2024-06-09 19:50, Jean Létourneau via groups.io wrote:

Any one else have this error?


23:40:16 10 *** [1] Secure login failed - account password does not match. - Disconnecting (166.62.170.54)<cr>
23:40:17 10 *** Protocol Error - Line should start with 'F'<cr>

-

Thank you John,?

I did have INTERLINK=1 in both ports but I moved the line up under the Driver line in the?
ARDOP port, same location it is in on the VARA HF port, works fine now.

Glenn/N3MEL

开云体育

Glenn,

Have you set the same INTERLOCK value on the VARA and ARDOP ports? That is how BPQ knows they share a radio.

73,
John

Current Config file - Original config only differed by having the silent key station listing in mapping...

=======Config File Start Paste======
; Configuration sets created by Greg N3BYR

;SIMPLE ? ? ? ? ? ? ; This set a whole load of paramters to reasonable defaults

BBS=1
BTINTERVAL=60
BUFFERS=999
C_IS_CHAT=1
FULL_CTEXT=1
HIDENODES=0
IDINTERVAL=15
IDLETIME=900
L3TIMETOLIVE=25
L4DELAY=10
L4RETRIES=3
L4TIMEOUT=60
L4WINDOW=4
ENABLE_LINKED=A
MAXCIRCUITS=128
MAXNODES=250
MAXHOPS=4
MAXLINKS=64
MAXROUTES=64
MAXRTT=90
MINQUAL=150
NODE=1
NODESINTERVAL=0
OBSINIT=6
OBSMIN=5
PACLEN=236
AUTOSAVE=1
SAVEMH=1
T3=180


;EXCLUDE= ? ? ? ? ; The banned list

LOCATOR=EM82DN ? ? ? ??
MAPCOMMENT=Mid GA Data Network (ARES)<BR>Access: RMS, BBS, CHAT, WEB, AREDN<BR>VHF Station 65w @ 45' AGL<BR> HF Station 65w @ 12' NVIS<BR>VHF: 145.030Mhz 1200 Packet 24/7<BR> HF: 14.105LSB/7.104LSB Mhz 300 Packet Day/Night<BR> VARA: HF dial 14.1017USB/7.104LSB N3BYR-10 RMS Gateway<BR>Solar Powered Station @ 415' ASL<BR>
NODECALL=N3BYR-7 ? ?; Default Node Callsign
NODEALIAS=WARTWN


IDINTERVAL=30
IDMSG:
MidGAData Network - EM82DN - HF/VHF - SSID -10 RMS, -12 CHAT, -1 BBS, -7 DIGI/SWITCH - VARA/PKT
***
INFOMSG:
Welcome to the Middle Georgia Data Netowrk and Tri-County ARES.
This station is operated and hosted by N3BYR in Warner Robins, GA
and node connections are available 24/7. Due to local WX Condx. the
node will occasionally shift to either a WX antenna system or suspend
operation. SYSOP can be contacted via N3BYR@... or you
can visit www.n3byr.com for more information.
***

CTEXT:
Welcome to the ARES & Mid GA Data Network hosted by N3BYR. www.n3byr.com for more information.
***




PORT ? ? ? ? ? ? ? ? ; Telnet Port
? ? PORTNUM=1 ? ?
? ? HIDE=1
? ? ID=Telnet Server
? ? DRIVER=TELNET
? ? CONFIG
? ? LOGGING=1
? ? CMS=1 ; Enable CMS Gateway
? ? CMSCALL=N3BYR
? ? CMSPASS=*** ; Secure CMS Password
? ? HTTPPORT=8090 ; Port used for Web Management
? ? TCPPORT=8010 ; Port for Telnet Access
? ? FBBPORT=8011 ; Not required, but allows monitoring using BPQTermTCP
? ? CMDPORT=63004 ;63008
? ? MAXSESSIONS=12
? ? FALLBACKTORELAY=1
? ? ?RELAYHOST=127.0.0.1
? ? ?RELAYAPPL=BBS
? ? CloseOnDisconnect=1 ; Close Telent Session when Node disconnects
? ? USER=*
? ? USER=*
? ? USER=*
? ? USER=*
? ? USER=*
? ? USER=*
? ??
ENDPORT

PORT ? ? ? ? ? ? ? ? ; KAM TNC
? ? ? ? PORTNUM=2 ? ? ? ? ? ? ? ? ? ? ??
? ? ? ? ID=VHF Packet Station 1200bps ? ; Displayed by PORTS command
? ? ? ? TYPE=ASYNC ? ? ? ? ? ? ? ? ? ? ?; Port is RS232
? ? ? ? PROTOCOL=KISS ? ? ? ? ? ? ? ? ; TNC is used in KISS or JKISS mode
? ? ? ? FULLDUP=0 ? ? ? ? ? ? ? ? ? ? ? ; Only meaningful for KISS or JKISS devices
? ? ? ? COMPORT=COM3
? ? ? ? SPEED=9600 ? ? ? ? ? ? ? ? ? ? ?; RS232 COM PORT SPEED
? ? ? ? CHANNEL=A ? ? ? ? ? ? ? ? ? ? ? ; A for single channel TNC, A or B for multichannel
? ? ? ? PERSIST=64 ? ? ? ? ? ? ? ? ? ? ?; PERSIST=256/(# of transmitters-1)
? ? ? ? SLOTTIME=100 ? ? ? ? ? ? ? ?; CMSA interval timer in milliseconds
? ? ? ? TXDELAY=400 ? ? ? ? ? ? ? ? ; Transmit keyup delay in milliseconds
? ? ? ? TXTAIL=50 ? ? ? ? ? ? ? ? ? ? ? ; TX key down, in milliseconds, at packet end
? ? ? ? MINQUAL=236 ? ? ? ? ? ? ? ? ; Only broadcast essential nodes
? ? ? ? QUALITY=90 ? ? ? ? ? ? ? ? ?; Quality factor applied to node broadcasts heard on
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; this port, unless overridden by a locked route
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; entry. Setting to 0 stops node broadcasts
? ? ? ? FRACK=7000 ? ? ? ? ? ? ? ? ? ? ?; Level 2 timout in milliseconds
? ? ? ? RESPTIME=1500 ? ? ? ? ? ? ? ; Level 2 delayed ack timer in milliseconds
? ? ? ? RETRIES=5 ? ? ? ? ? ? ? ? ? ? ?; Level 2 maximum retry value
? ? ? ? MAXFRAME=3 ? ? ? ? ? ? ? ? ? ? ?; Max outstanding frames (1 thru 7)
? ? ? ? PACLEN=128 ? ? ? ? ? ? ? ? ? ? ?; Default max packet length for this port.
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; PACLEN is ignored for APRS packets
? ? ? ? BCALL= ? ? ? ? ? ? ? ?; BTEXT call. unstated defaults to APPL1CALL
? ? ? ? L3ONLY=0 ? ? ? ? ? ? ? ? ? ? ? ?; 1=No user downlink connects on this port
? ? ? ? DIGIFLAG=1 ? ? ? ? ? ? ? ? ? ? ?; Digipeat: 0=OFF, 1=ALL, 255=UI Only
? ? ? ? DIGIPORT=0 ? ? ? ? ? ? ? ? ? ? ?; Port on which to send digi'd frames (0 = same port)
? ? ? ? USERS=10 ? ? ? ? ? ? ? ? ? ? ? ?; Maximum number of L2 sessions, 0 = no limit
? ? ? ? UIONLY=0 ? ? ? ? ? ? ? ? ? ? ? ?; If set to 1 will stop any connects on this port ie it can only be used for UNPROTO traffic, such as APRS.
? ? ? ? WL2KREPORT PUBLIC, server.winlink.org, 8085, N3BYR, EM82DN, 00-23, 145030000, PKT1200, 50, 50, 9, 0 ? ? ? ? ? ? ? ? ? ? ? ? ?
ENDPORT

PORT ? ? ? ? ? ? ? ? ; KAM TNC
? ? ? ? PORTNUM=3 ? ? ? ? ? ? ? ? ? ? ? ; Optional but sets port number if stated
? ? ? ? INTERLOCK=1 ? ? ? ? ? ? ? ? ? ? ; This radio also used for VARA
? ? ? ? ID=HF Packet Station 300bps ? ?; Displayed by PORTS command
? ? ? ? TYPE=ASYNC ? ? ? ? ? ? ? ? ? ? ?; Port is RS232
? ? ? ? PROTOCOL=KISS ? ? ? ? ? ? ? ? ; TNC is used in KISS or JKISS mode
? ? ? ? FULLDUP=0 ? ? ? ? ? ? ? ? ? ? ? ; Only meaningful for KISS or JKISS devices
? ? ? ? COMPORT=COM3
? ? ? ? SPEED=9600 ? ? ? ? ? ? ? ? ? ? ?; RS232 COM PORT SPEED
? ? ? ? CHANNEL=B ? ? ? ? ? ? ? ? ? ? ? ; A for single channel TNC, A or B for multichannel
? ? ? ? PERSIST=64 ? ? ? ? ? ? ? ? ? ? ?; PERSIST=256/(# of transmitters-1)
? ? ? ? SLOTTIME=100 ? ? ? ? ? ? ? ?; CMSA interval timer in milliseconds
? ? ? ? TXDELAY=400 ? ? ? ? ? ? ? ? ; Transmit keyup delay in milliseconds
? ? ? ? TXTAIL=50 ? ? ? ? ? ? ? ? ? ? ? ; TX key down, in milliseconds, at packet end
? ? ? ? MINQUAL=236 ? ? ? ? ? ? ? ? ; Only broadcast essential nodes
? ? ? ? QUALITY=90 ? ? ? ? ? ? ? ? ?; Quality factor applied to node broadcasts heard on
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; this port, unless overridden by a locked route
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; entry. Setting to 0 stops node broadcasts
? ? ? ? FRACK=7000 ? ? ? ? ? ? ? ? ? ? ?; Level 2 timout in milliseconds
? ? ? ? RESPTIME=1500 ? ? ? ? ? ? ? ; Level 2 delayed ack timer in milliseconds
? ? ? ? RETRIES=5 ? ? ? ? ? ? ? ? ? ? ?; Level 2 maximum retry value
? ? ? ? MAXFRAME=3 ? ? ? ? ? ? ? ? ? ? ?; Max outstanding frames (1 thru 7)
? ? ? ? PACLEN=32 ? ? ? ? ? ? ? ? ? ? ?; Default max packet length for this port.
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ; PACLEN is ignored for APRS packets
? ? ? ? BCALL= ? ? ? ? ? ? ? ; BTEXT call. unstated defaults to APPL1CALL
? ? ? ? L3ONLY=0 ? ? ? ? ? ? ? ? ? ? ? ?; 1=No user downlink connects on this port
? ? ? ? DIGIFLAG=0 ? ? ? ? ? ? ? ? ? ? ?; Digipeat: 0=OFF, 1=ALL, 255=UI Only
? ? ? ? DIGIPORT=0 ? ? ? ? ? ? ? ? ? ? ?; Port on which to send digi'd frames (0 = same port)
? ? ? ? USERS=10 ? ? ? ? ? ? ? ? ? ? ? ?; Maximum number of L2 sessions, 0 = no limit
? ? ? ? UIONLY=0 ? ? ? ? ? ? ? ? ? ? ? ?; If set to 1 will stop any connects on this port ie it can only be used for UNPROTO traffic, such as APRS.
? ? ? ? ? ? ? ? ? ? ? ? ??
ENDPORT

PORT
?PORTNUM=4
?ID=Network Links AREDN/WAN
?DRIVER=BPQAXIP
?QUALITY=200
?MAXFRAME=4
?FRACK=7000
?RESPTIME=1000
?RETRIES=10
?PACLEN=120
?CONFIG
?UDP 10093 ? ? ? ? ? ? ? ? # Optional. Enables UDP support, and defines the port
? ? ? ? ? ? ? ? ? ? ? ? ? ?# AX.IP listens on. You can specify more than one
? ? ? ? ? ? ? ? ? ? ? ? ? ?# UDP line if you need to listen on more than one port
?MHEARD ? ? ? ? ? ? ? ? ? ?# Optional - opens a window to display a "Heard List"?
?BROADCAST NODES
?MAP KA4KKF UDP 10093 B
?MAP W9IKU UDP 10093 B
?MAP KD4WLE UDP 10093 B
?MAP KK4DIV-7 UDP 10093 B
?MAP NC8Q-7 UDP 10093 B
?MAP KA3VSP-7 UDP 10093 B
?MAP KE4QCM-7 UDP 10093 B
ENDPORT




PORT
?PORTNUM=5
?ID=VARA HF
?DRIVER=VARA
?INTERLOCK=1
?CONFIG
?ADDR 127.0.0.1 8300 PTT CI-V PATH C:\VARA\VARA.exe
?BW2300
?RIGCONTROL
? COM4 9600 ICOM IC718 5Eh
? 00:00
? 60,7.1006,USB

??
?****

?WL2KREPORT PUBLIC, server.winlink.org, 8085, N3BYR-10, EM82DN, 00-23, 7102200, VARA, 65, 12, 0, 0

ENDPORT





; WINLINK REPORT STATMENT **REFERENCE **
; WL2KREPORT Service, Host, Port, Callsign, Locator, Hours, Freq, Mode, Power, Ant Height, Ant Gain, Ant Direction


; **** Applications ****?
APPLICATION 1,RMS,C 1 CMS,N3BYR-10 ? ? ? ? ? ?; CMS Application
APPLICATION 2,BBS,,N3BYR-1,(P)BBS,255 ? ? ? ? ? ?; BBS Application
APPLICATION 3,CHAT,,N3BYR-12,BYRCHT,255 ? ? ? ? ? ?; CHAT Application
======Config File Stop Paste=======

Good Morning, I wanted to at least drop a note about an issue I ran into with the latest iteration of BPQ32. While I found a way to resolve it, I'm unsure that it's known or if it may just be my system. I will attempt to check up on this thread as time permits but my schedule is a bit hectic at the moment.

Issue: I needed to remove a map line from my AXUDP configuration file (silent key, node went offline). After removing the map line I rebooted the entire computer and brought BPQ32 back online. BPQ continued to attempt to connect to the station even though the map line was removed. A few more checks to ensure I removed any and all references to the station. I rebooted again, BPQ continued to attempt to connect to the station. BBS traffic from others (Bulls, PMs, etc.) became intermittent over the same port when the silent key station was removed from mapping.

Troubleshooting: I attempted to remove a known active mapped node to test, same results - the BPQ continues to attempt to connect to the stations that were removed from mapping that are active.

Resolution: I removed the port from my config file - the whole port settings and rebooted. On reboot I verified the port for AXUDP/AXIP port was no longer listed or active. I then put the port back into the config file with no stations mapped. BPQ made no attempt to connect to any previous stations. I then populated the mapping section (without the silent key station) and BPQ connected to only the new map listings. No issues past that point.

Configuration: Port 1 Telnet (Internal/AREDN accessible only and CMS), Port 2 VHF Packet only, Port 3 HF Packet only with interlock between Port 3 & 5, Port 4 AXIP/AXUDP, Port 5 HF VARA with interlock between port 3 & 5, OS Windows 10, Interfaces are by sound card for VARA and Kantronics KAM along with some audio mixing externally to share the transceiver. I will post the current configuration file (sterilized) on this post shortly. The only difference between the original config and the new config is the silent key station is removed.

Greg - N3BYR

Any one else have this error?


23:40:16 10 *** [1] Secure login failed - account password does not match. - Disconnecting (166.62.170.54)<cr>
23:40:17 10 *** Protocol Error - Line should start with 'F'<cr>



--

73 de Jean,
VA2OM / VE2PKT

Sysop de: VE2PKT (BBS), VE2PKT-13 (URONode), VE2PKT-4 (XRPI)
: VE2PKT-5 (Jnos), VE2PKT-9 (DXCluster)

RF: 145.05 Mhz (1.2K Bps)

Internet:
Telnet: ve2pkt.dyndns.org port 2323 (Xrpi Node) - VE2PKT-4
Telnet: ve2pkt.ampr.org port 9000 (DXCluster) - VE2PKT-9

E-Mail:
packet: va2om@ve2pkt.#qbc.qc.can.noam
ampr net: va2om@...
Inet: ve2pkt@...

Hamshack Hotline: 5500000866

Membre Createur du groupe [email protected]

/g/PacketQuebec

Carte des Station RF au Quebec

Hi, John:

Marvelous. There is a chance.

73, Chuck

开云体育

port 80

73, John

开云体育

On 6/8/24 14:36, John G8BPQ wrote:

I'm currently testing ardopcf and QtSoundModem with an IC7100 on a Pi4.

I had to make a change to ardopcf to get it to open the dsnoop device (it reported can't set sample rate).

Once I'm happy that is it working I'll publish the patch to ardopcf and the ALSA configuration. It may not be for a few days as I'm away sailing at the moment.

73, John

Wow!
I am loving this progress.
:-)

73, Chuck

Excellent.
? ?That is what has been happening and what is active and what I have done. It’s nice to know I did not create a problem. In some way white pages still stand as a guide and works. Every day is a work in progress in doing the right thing because of your responses. Thanks ?John bpq and you Mark .

n9pno in Iowa