Joey, according to my info your node has been offline for the last 7 hours. Are you sure it is starting? Look for network issues and error messages and get the node back online first.
Cheers,
Mark
|
Re: direwolf, signalink, and bpq32 on linux
Christopher Molnar, did you get it sorted???
|
Re: Providing RMS via AREDN from LinBPQ
Absolutely.?
Open Winlink Express
Open a Telnet Post Office Session
Click Add Server
Click UPDATE AREDN MESH NODE LIST
This only works if your node is connected to the mesh network properly.
Mark
|
On 7/14/22 06:33, John G8BPQ wrote: The resolver converts host names to pi addreses. Can be viewed in the Windows GUI or via the node command AXR
<snip> 73,
John
On 14/07/2022 10:54, Chuck Gelm wrote:
On 7/14/22 00:44, Joey N4QMI wrote:
Nothing shows up in my AXIP port resolver All:
What is an 'AXIP port resolver' ?
3s, Chuck Super cool! Works fine in (pi)linbpq. Thanks.
|
Re: Providing RMS via AREDN from LinBPQ
On 7/13/22 22:15, Heber Soto wrote: Hello
Can a LinBPQ connected to a AREDN node provide a RMS service via AREDN?
--
Gracias 73,
Heber
NP4JN Here is another link:
|
The resolver converts host names to pi addreses. Can be viewed in
the Windows GUI or via the node command AXR
axr 1
BPQ:G8BPQ-2} AXIP Resolver info for Port 1
GM8BPQ-11? = 192.168.1.199 0 = 192.168.1.199
GM8BPQ-7?? = 192.168.1.35 10093 = 192.168.1.35 B
AE5E-14??? = DXSPOTS.COM 10093 = 216.172.112.208 B C
G8BPQ-9??? = 192.168.1.44 10092 = 192.168.1.44 B
N9PMO-2??? = n9pmo.no-ip.org 10093 = 70.94.252.87 B
N9LYA????? = w9bbs.no-ip.org 10093 = 63.142.97.107 B
73,
John
On 14/07/2022 10:54, Chuck Gelm wrote:
toggle quoted message
Show quoted text
On
7/14/22 00:44, Joey N4QMI wrote:
Nothing shows up in my AXIP port resolver
All:
What is an 'AXIP port resolver' ?
3s, Chuck
|
Re: Providing RMS via AREDN from LinBPQ
On 7/13/22 22:15, Heber Soto wrote: Hello
Can a LinBPQ connected to a AREDN node provide a RMS service via AREDN?
--
Gracias 73,
Heber
NP4JN Attached is a 1 minute video segment from a video by Orv Beach w6bi. (2.5 MBytes) In addition to 'auto-discovery' by Winlink Express... My 'Winlink Post Office' on my AREDN network server only requires BBS registration and a web browser to send/receive Winlink email. This is configurable with the BPQ32 application. 3s, Chuck
|
On Wed, Jul 13, 2022 at 09:44 PM, Joey N4QMI wrote:
Well i wanted add some routes to my AXIP route and the new ones do not work. Nothing shows up in my AXIP port resolver or the MHeard window. The person I am mapped to sees me in his port resolver abut that is all. I currently has three people mapped but have not been able to add anyone else so far. Any ideas?
Joey
N4QMI
I hope you asked permissions before adding maps to those as they must often be reciprocal for them to work. If its a bunch of copy pasted maps from somewhere this is not the way to go about linking. Feel free to drop me a line: ?password to the page is “matrix” 73 de Red
|
Chuck: hidden command: AXR(esolver) <port> Gives list of maps configured. 73s Red
|
Re: Providing RMS via AREDN from LinBPQ
On 7/13/22 22:15, Heber Soto wrote: Hello
Can a LinBPQ connected to a AREDN node provide a RMS service via AREDN?
"4 - Session Types - - - - Mesh" Click on 'Mesh'.
|
Re: Providing RMS via AREDN from LinBPQ
Interesting question, I’m an ardent AREDN MESH user, and ARRL Tech Spec on the subject.
The RMS servers are on the Public Internet, AREDN is not. BUT, you can bridge to public internet from your AREDN MESH router, there may be a way.
POINT: AREDN is amateur radio, so any RF links in the AREDN MESH network must NOT be encrypted.
Give it a try, Heber, we’re always looking for experimenters in AREDN.
sparks kk4ib
toggle quoted message
Show quoted text
On Jul 13, 2022, at 10:15 PM, Heber Soto < np4jn@...> wrote: Hello
Can a LinBPQ connected to a AREDN node provide a RMS service via AREDN?
--
Gracias 73,
Heber
NP4JN
|
On 7/14/22 00:44, Joey N4QMI wrote: Nothing shows up in my AXIP port resolver All: What is an 'AXIP port resolver' ? 3s, Chuck
|
Re: Providing RMS via AREDN from LinBPQ
On 7/13/22 22:15, Heber Soto wrote:
Hello
Can a LinBPQ connected to a AREDN node provide a RMS service via
AREDN?
--?
Gracias 73,
Heber
NP4JN
Yes.
--
|
The most likely is a problem with your AXIP port config. Do you get
any error messages in the console window when you start BPQ?
If not, if you send me the AXIP bit of your bpq2.cfg I'll check it
out.
73,
John
On 14/07/2022 05:44, Joey N4QMI wrote:
toggle quoted message
Show quoted text
Well i wanted add some routes to my AXIP route and the new ones do
not work. Nothing shows up in my AXIP port resolver or the MHeard
window. The person I am mapped to sees me in his port resolver
abut that is all. I currently has three people mapped but have not
been able to add anyone else so far. Any ideas?
Joey
N4QMI
|
Re: Providing RMS via AREDN from LinBPQ
Provided that somewhere on the ARDEN network there is a node with Internet to access an RMS Server then yes.
73, John
toggle quoted message
Show quoted text
On 14/07/2022 03:15, Heber Soto wrote: Hello
Can a LinBPQ connected to a AREDN node provide a RMS service via AREDN?
|
Well i wanted add some routes to my AXIP route and the new ones do not work. Nothing shows up in my AXIP port resolver or the MHeard window. The person I am mapped to sees me in his port resolver abut that is all. I currently has three people mapped but have not been able to add anyone else so far. Any ideas?
Joey
N4QMI
|
Re: Update for Version 6.0.23.1
Richard Hendricks - KE0GB
Mike:
Thanks for all the help on this issue.
73 - Rick
|
Providing RMS via AREDN from LinBPQ
Hello
Can a LinBPQ connected to a AREDN node provide a RMS service via AREDN?
--
Gracias 73,
Heber
NP4JN
|
Update for Version 6.0.23.1
Hello Group
John added a update to his Beta URL, there was a problem with the commands NOD ADD or DEL using BPQ Terminal
Sysop Command
73
Mike Melnik-N9PMO
BPQ32 Group Moderator
|
Rick
?
I see the same from time to time, I think it
may pop in there from the BPQ32 Node Quality Normalizer
but usually is from another node other then
mine, the BPQNODES.DAT file
?
I sent the
rest of the information direct to your email because of the command, you will
understand
after you
receive my email.
?
I will
check with John as to the failure with the command, it did work in previous
version of 6.0.23.1
?
73
Mike
Melnik-N9PMO
BPQ32 Group Moderator
|
Joshua KJ7LVZ
Red R. R. Tuby (PE1RRR)