Re: Looking for testers for an AX.25 Terminal app for iOS
|
Hello Rich,
I didn't see that message here or I missed it, I'm sorry. Well that answers it,
hopefully it will be implemented in one of the next releases.
Thanks and 73,
Boudewijn VE3TOK
toggle quoted message
Show quoted text
On 5/22/25 18:25, Rich Sahlender via groups.io wrote: Hello Boudewijn,
That was a separate thread and John did reply.
See /g/bpq32/message/44026
73 de Rich WA3WLH
--
There is nothing permanent except change
Heraclitus
|
|
|
Re: Looking for testers for an AX.25 Terminal app for iOS
|
Hi John (G8BPQ),
I hope you have read my message of a couple of days ago to the list that outgoing IPv6 telnet forwarding doesn't work in the latest beta as well as the stable version.
It fails to connect if I test it manually to a IPv6 only accessible tcp port. This makes that I can't forward to telnet servers who are only accessible over IPv6 or that IPv4/IPv6
accessible ports fall back to IPv4. They can access BPQ here with IPv6 over telnet, so luckily the mail flows with reserve forwarding in that way. Is there any solution to this?
Regards,
Boudewijn VE3TOK
---
The issue with BPQ seems to be not the 'defaulting to IPv4' but that outgoing telnet to IPv6 fails to connect at all both in the latest stable and beta versions and
this while IPv4 and IPv6 are both enabled for the telnet port, see below.
--
I tested outgoing telnet from the BPQ node to a tcp port what can only handle IPv6 as I have a 6tunnel for IPv6 to Xnet, what is a IPv4 only program.
6tunnel converts here a IPv6 input at tcp port 24 to IPv4 at tcp port 23 what connects to Xnet.
BPQ
po
BPQTOK:VE3TOK-12} Ports
? 1 Kiss Link to Kernel
? 2 Kiss Link to (X)net
? 3 Telnet Server
? 4 AX/IP/UDP
attach 3
BPQTOK:VE3TOK-12} Ok
c linux.ve3mch.ampr.org 24
*** Failed to Connect
linux.ve3mch.ampr.org resolves both to an IPv4 and IPV6 address. I tested this from the latest stable BPQ version as well as from the latest beta version
and both are failing with outgoing telnet over IPv6. Both IPv4 and IPv6 are enabled for the telnet port in BPQ with,
? IPV6=1
? IPV4=1
From the linux shell to proof that IPv6 really works at port 24
# telnet linux.ve3mch.ampr.org 24
Trying 2001:470:1d:138::1...
Connected to linux.ve3mch.ampr.org.
Escape character is '^]'.
(X)NET 1.39 @ VE3MCH-8 on LINUX: PSE enter Your callsign to login.
Login:
With IPv4 from the shell to Xnet at port 24
telnet -4 linux.ve3mch.ampr.org 24
Trying 44.135.85.151...
telnet: Unable to connect to remote host: Connection refused
What is as expected.
Regards,
Boudewijn VE3TOK
--
There is nothing permanent except change
Heraclitus
|
yes, like i replied earlier;
the aprsis system will reject all dupes. so if a packet is sent by 2 methods or 20 methods, the first packet to arrive is accepted and all others are rejected.
since there is minimal delay in sending a packet 'over the internet', that packet will arrive first 99 times out of 100 and therefore all other duplicate packets are rejected.
:)
good luck kb0wlf
Still trying to learn (I'm not a programmer :)
?
Doesn't =1 use both IS and RF?
?
If so, looks like IS gets all the love.
|
Thanks, Rich.
Running under gdb with an unstripped version should help.
73, John
toggle quoted message
Show quoted text
On 21/05/2025 19:05, Rich Sahlender via groups.io wrote: John,
I just noticed an unexpected restart for the #USWST chat hub. There are no RF ports on this system. The only 2 ports are AXIP and Telnet. It is a Debian Bookworm 12.10 x64 based vpn updated just a few days ago.
The following is from the console. The first 3 lines are from my wrapper script but note the time is in PDT so for the moment is -7 hrs from UTC... also note that the executable was stripped after compile so I am guessing what follows may not be much help. I will rerun a non-stripped copy and if necessary via gdb if needed.
**
* LinBPQ restart - 20250518200601
**
G8BPQ AX25 Packet Switch System Version 6.0.24.71 April 2025
Copyright?? 2001-2025 John Wiseman G8BPQ
Current Directory is /home/linbpq/linbpq
Log Directory is /home/linbpq/linbpq
Making Directory /home/linbpq/linbpq/logs
Configuration file Preprocessor.
Using Configuration file /home/linbpq/linbpq/bpq32.cfg
Conversion (probably) successful
PORTS 0x55f9b7982e60 LINKS 0x55f9b7984ea0 DESTS 0x55f9b798aea0 ROUTES 0x55f9b7993b40 L4 0x55f9b7995940 BUFFERS 0x55f9b799e980
Initialising Port 01???? AXIP
Initialising Port 02???? Telnet Server
MQTT Enabled 0
Starting Chat
Config File is /home/linbpq/linbpq/chatconfig.cfg
Chat Started
slave device: /dev/pts/0. symlink to /tmp/bpqtnc2 created
TNC Emulator Init Complete
SIGSEGV Received
./linbpq(+0x13b28c)[0x55f9b785628c]
/lib/x86_64-linux-gnu/libc.so.6(+0x3c050)[0x7ffaa225b050]
/lib/x86_64-linux-gnu/libc.so.6(+0xa9d76)[0x7ffaa22c8d76]
/lib/x86_64-linux-gnu/libc.so.6(+0x5e258)[0x7ffaa227d258]
/lib/x86_64-linux-gnu/libc.so.6(+0x7e758)[0x7ffaa229d758]
./linbpq(+0x1a15ee)[0x55f9b78bc5ee]
./linbpq(+0x1a5861)[0x55f9b78c0861]
./linbpq(+0x1a58ae)[0x55f9b78c08ae]
./linbpq(+0x1a6029)[0x55f9b78c1029]
./linbpq(+0x1a9754)[0x55f9b78c4754]
SIGSEGV Received
./linbpq(+0x13b28c)[0x55f9b785628c]
/lib/x86_64-linux-gnu/libc.so.6(+0x3c050)[0x7ffaa225b050]
/lib/x86_64-linux-gnu/libc.so.6(+0xa9d76)[0x7ffaa22c8d76]
/lib/x86_64-linux-gnu/libc.so.6(+0x5e258)[0x7ffaa227d258]
/lib/x86_64-linux-gnu/libc.so.6(+0x7e758)[0x7ffaa229d758]
./linbpq(+0x1a15ee)[0x55f9b78bc5ee]
./linbpq(+0x1a5861)[0x55f9b78c0861]
./linbpq(+0x1a58ae)[0x55f9b78c08ae]
./linbpq(+0x1a6029)[0x55f9b78c1029]
./linbpq(+0x1a9754)[0x55f9b78c4754]
Tnx es 73 de Rich WA3WLH
|
Re: Looking for testers for an AX.25 Terminal app for iOS
I would love to test your program but my iPad generation 6 will only update to iOS 17.7.5. Is there any way to compile your code to install and run on a lower version of iOS ?
?
Thanks,
?
Jon G7JJF
?
|
toggle quoted message
Show quoted text
On Wed, May 21, 2025 at 19:27, Mark Taylor < mtaylor@...> wrote:
APRSDigi is not an APRS client per se, but if you start BPQAprs program I think you will get the results you are looking for. ?Works on Windows. ?Linux I can¡¯t say.?
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
|
APRSDigi is not an APRS client per se, but if you start BPQAprs program I think you will get the results you are looking for. ?Works on Windows. ?Linux I can¡¯t say.?
?
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
|
Good evening
?
I am using Direwolf with linbpq as an APRS setup. However, not seeing the inet stream in direwolf, nor are stations populating on the aprs map from the bpq server.
?
Here's what I have -
ISHost=rotate.aprs2.net ? ?; APRS-IS Host Name. May be either an IPV4 or an IPV6 Host
?ISPort=14580 ? ? ? ? ? ? ? ?; Normal port for a filtered feed
?ISPasscode=8334 ? ? ? ? ? ?; If you don't already have a passcode I can issue you one.
?;
?; You can specify a filter command to be sent when you log on to APRS-IS. Normally you don't
?; need one. The APRS Mapping Application (BPQAPRS) sets a filter when it starts,
?; and if you aren't running an APRS application, there isn't much point in getting info from APRS-IS
?;
?ISFilter=m/64?
?;GateLocalDistance=0
?;GATEDPATH 3=APRS
?LOGAPRSIS=1
?
|
John,
I just noticed an unexpected restart for the #USWST chat hub. There are no RF ports on this system. The only 2 ports are AXIP and Telnet. It is a Debian Bookworm 12.10 x64 based vpn updated just a few days ago.
The following is from the console. The first 3 lines are from my wrapper script but note the time is in PDT so for the moment is -7 hrs from UTC... also note that the executable was stripped after compile so I am guessing what follows may not be much help. I will rerun a non-stripped copy and if necessary via gdb if needed.
**
* LinBPQ restart - 20250518200601
**
G8BPQ AX25 Packet Switch System Version 6.0.24.71 April 2025
Copyright?? 2001-2025 John Wiseman G8BPQ
Current Directory is /home/linbpq/linbpq
Log Directory is /home/linbpq/linbpq
Making Directory /home/linbpq/linbpq/logs
Configuration file Preprocessor.
Using Configuration file /home/linbpq/linbpq/bpq32.cfg
Conversion (probably) successful
PORTS 0x55f9b7982e60 LINKS 0x55f9b7984ea0 DESTS 0x55f9b798aea0 ROUTES 0x55f9b7993b40 L4 0x55f9b7995940 BUFFERS 0x55f9b799e980
Initialising Port 01???? AXIP
Initialising Port 02???? Telnet Server
MQTT Enabled 0
Starting Chat
Config File is /home/linbpq/linbpq/chatconfig.cfg
Chat Started
slave device: /dev/pts/0. symlink to /tmp/bpqtnc2 created
TNC Emulator Init Complete
SIGSEGV Received
./linbpq(+0x13b28c)[0x55f9b785628c]
/lib/x86_64-linux-gnu/libc.so.6(+0x3c050)[0x7ffaa225b050]
/lib/x86_64-linux-gnu/libc.so.6(+0xa9d76)[0x7ffaa22c8d76]
/lib/x86_64-linux-gnu/libc.so.6(+0x5e258)[0x7ffaa227d258]
/lib/x86_64-linux-gnu/libc.so.6(+0x7e758)[0x7ffaa229d758]
./linbpq(+0x1a15ee)[0x55f9b78bc5ee]
./linbpq(+0x1a5861)[0x55f9b78c0861]
./linbpq(+0x1a58ae)[0x55f9b78c08ae]
./linbpq(+0x1a6029)[0x55f9b78c1029]
./linbpq(+0x1a9754)[0x55f9b78c4754]
SIGSEGV Received
./linbpq(+0x13b28c)[0x55f9b785628c]
/lib/x86_64-linux-gnu/libc.so.6(+0x3c050)[0x7ffaa225b050]
/lib/x86_64-linux-gnu/libc.so.6(+0xa9d76)[0x7ffaa22c8d76]
/lib/x86_64-linux-gnu/libc.so.6(+0x5e258)[0x7ffaa227d258]
/lib/x86_64-linux-gnu/libc.so.6(+0x7e758)[0x7ffaa229d758]
./linbpq(+0x1a15ee)[0x55f9b78bc5ee]
./linbpq(+0x1a5861)[0x55f9b78c0861]
./linbpq(+0x1a58ae)[0x55f9b78c08ae]
./linbpq(+0x1a6029)[0x55f9b78c1029]
./linbpq(+0x1a9754)[0x55f9b78c4754]
Tnx es 73 de Rich WA3WLH
|
Tait TM8105
Jason Rausch K4APR www.ke4nyv.com
On Wednesday, May 21, 2025 at 07:38:06 AM EDT, dtmenges@... via groups.io <dtmenges@...> wrote:
Looking to add a UHF port to our LinBPOQ site. Any recommendations, either for or against, for a used radio? Running a Kenwood TM-271 for VHF.
?
Dave Menges
|
Re: Slackware 15 Build Fail
Yes, that is helpful. A suggestion for the document would be a quick mention about either making symbolic links from library.so to library.a for Slackware, or any other platform that uses shared object libraries. Or editing the makefile changing .a depends to .so. I almost forgot about that when compiling this last time. Thanks, John. Chris KQ6UP On Tue, May 20, 2025 at 10:25?PM John G8BPQ via groups.io <john.wiseman@...> wrote:
Have you seen
It details the latest dependencies and info on building without MQTT support and building libpaho-mqtt-dev if it is not included in your system.
73,
John
On 21/05/2025 02:36, Chris Maness KQ6UP via groups.io wrote:
Trying to get the latest and greatest, since it has been a while since
I compiled a fresh binary on my slackware box. Looks like it is
looking for a library related to The Internet of Things client
"libpaho-mqtt3a" (or at least the library for it). I am thinking this
is a new dependency that does not come bundled with Slackware 15.
Unfortunately not in the Slackbuilds 3rd party repo.
gcc -DLINBPQ -MMD -g -rdynamic -fcommon -fasynchronous-unwind-tables
-c -o RHP.o RHP.c
gcc pngwtran.o pngrtran.o pngset.o pngrio.o pngwio.o pngtrans.o
pngrutil.o pngwutil.o pngread.o pngwrite.o png.o pngerror.o pngget.o
pngmem.o APRSIconData.o AISCommon.o upnp.o APRSStdPages.o HSMODEM.o
WinRPR.o KISSHF.o TNCEmulators.o bpqhdlc.o SerialPort.o adif.o
WebMail.o utf8Routines.o VARA.o LzFind.o Alloc.o LzmaDec.o LzmaEnc.o
LzmaLib.o Multicast.o ARDOP.o IPCode.o FLDigi.o linether.o CMSAuth.o
APRSCode.o BPQtoAGW.o KAMPactor.o AEAPactor.o HALDriver.o MULTIPSK.o
BBSHTMLConfig.o ChatHTMLConfig.o BBSUtilities.o bpqaxip.o BPQINP3.o
BPQNRR.o cMain.o Cmd.o CommonCode.o HTMLCommonCode.o compatbits.o
config.o datadefs.o FBBRoutines.o HFCommon.o Housekeeping.o HTTPcode.o
kiss.o L2Code.o L3Code.o L4Code.o lzhuf32.o MailCommands.o
MailDataDefs.o LinBPQ.o MailRouting.o MailTCP.o MBLRoutines.o md5.o
Moncode.o NNTPRoutines.o RigControl.o TelnetV6.o WINMOR.o TNCCode.o
UZ7HODrv.o WPRoutines.o SCSTrackeMulti.o SCSPactor.o SCSTracker.o
HanksRT.o UIRoutines.o AGWAPI.o AGWMoncode.o DRATS.o FreeDATA.o
base64.o Events.o nodeapi.o mailapi.o mqtt.o RHP.o -Xlinker
-Map=output.map -l:libminiupnpc.so -lrt -lm -lz -l:libpaho-mqtt3a.a
-l:libjansson.a -lpthread -lconfig -lpcap -o linbpq
/usr/bin/ld: cannot find -l:libpaho-mqtt3a.a
/usr/bin/ld: cannot find -l:libjansson.a
collect2: error: ld returned 1 exit status
make: *** [makefile:35: linbpq] Error 1
Please advise :D
-- Thanks, Chris Maness
|
SOLVED Re: [bpq32] QtSoundModem: error while loading shared libraries: libfftw3f.so.3:
I was able to resolve it by building from source
On May 21, 2025, at 09:27, Robert Cartier via groups.io <kd1jg@...> wrote:
John
I downloaded the latest QtSoundModem and am getting the error of cant open object of
QtSoundModem: error while loading shared libraries: libfftw3f.so.3:
I installed all the libraries based on the webpage
Thanks in Advance
Ron - kd1jg
|
QtSoundModem: error while loading shared libraries: libfftw3f.so.3:
John
I downloaded the latest QtSoundModem and am getting the error of cant open object of
QtSoundModem: error while loading shared libraries: libfftw3f.so.3:
I installed all the libraries based on the webpage
Thanks in Advance
Ron - kd1jg
|
Looking to add a UHF port to our LinBPOQ site. Any recommendations, either for or against, for a used radio? Running a Kenwood TM-271 for VHF.
?
Dave Menges
|
Re: Sample LinBPQ Configuration
Thanks, Scott. My .cfg looks a lot like that.
?
I think one of the problems with configuration files is that some of them lean towards being a "how-to" for everything possible and the new SYSOP gets overwhelmed. Direwolf is the same way. Once I figured out that I didn't need it all, life got easier.
?
Just to be clear, I'm not complaining about the software developers doing this. They write code and BPQ and Direwolf are both complex programs. The company I retired from as a technical writer had several people to developed classroom training and? user assistance (help files) and it was a full-time job to keep up. And we were getting paid. The developers for this freeware that we enjoy are probably a one man show and do this as a service to the hobby.?
?
Not sure what the answer is but examples like Scott's should help the new user.
?
Dave Menges
|
Re: Slackware 15 Build Fail
Have you seen
It details the latest dependencies and info on building without MQTT
support and building libpaho-mqtt-dev
if it is not included in your system.
73,
John
On 21/05/2025 02:36, Chris Maness KQ6UP
via groups.io wrote:
toggle quoted message
Show quoted text
Trying to get the latest and greatest, since it has been a while since
I compiled a fresh binary on my slackware box. Looks like it is
looking for a library related to The Internet of Things client
"libpaho-mqtt3a" (or at least the library for it). I am thinking this
is a new dependency that does not come bundled with Slackware 15.
Unfortunately not in the Slackbuilds 3rd party repo.
gcc -DLINBPQ -MMD -g -rdynamic -fcommon -fasynchronous-unwind-tables
-c -o RHP.o RHP.c
gcc pngwtran.o pngrtran.o pngset.o pngrio.o pngwio.o pngtrans.o
pngrutil.o pngwutil.o pngread.o pngwrite.o png.o pngerror.o pngget.o
pngmem.o APRSIconData.o AISCommon.o upnp.o APRSStdPages.o HSMODEM.o
WinRPR.o KISSHF.o TNCEmulators.o bpqhdlc.o SerialPort.o adif.o
WebMail.o utf8Routines.o VARA.o LzFind.o Alloc.o LzmaDec.o LzmaEnc.o
LzmaLib.o Multicast.o ARDOP.o IPCode.o FLDigi.o linether.o CMSAuth.o
APRSCode.o BPQtoAGW.o KAMPactor.o AEAPactor.o HALDriver.o MULTIPSK.o
BBSHTMLConfig.o ChatHTMLConfig.o BBSUtilities.o bpqaxip.o BPQINP3.o
BPQNRR.o cMain.o Cmd.o CommonCode.o HTMLCommonCode.o compatbits.o
config.o datadefs.o FBBRoutines.o HFCommon.o Housekeeping.o HTTPcode.o
kiss.o L2Code.o L3Code.o L4Code.o lzhuf32.o MailCommands.o
MailDataDefs.o LinBPQ.o MailRouting.o MailTCP.o MBLRoutines.o md5.o
Moncode.o NNTPRoutines.o RigControl.o TelnetV6.o WINMOR.o TNCCode.o
UZ7HODrv.o WPRoutines.o SCSTrackeMulti.o SCSPactor.o SCSTracker.o
HanksRT.o UIRoutines.o AGWAPI.o AGWMoncode.o DRATS.o FreeDATA.o
base64.o Events.o nodeapi.o mailapi.o mqtt.o RHP.o -Xlinker
-Map=output.map -l:libminiupnpc.so -lrt -lm -lz -l:libpaho-mqtt3a.a
-l:libjansson.a -lpthread -lconfig -lpcap -o linbpq
/usr/bin/ld: cannot find -l:libpaho-mqtt3a.a
/usr/bin/ld: cannot find -l:libjansson.a
collect2: error: ld returned 1 exit status
make: *** [makefile:35: linbpq] Error 1
Please advise :D
|
Trying to get the latest and greatest, since it has been a while since
I compiled a fresh binary on my slackware box. Looks like it is
looking for a library related to The Internet of Things client
"libpaho-mqtt3a" (or at least the library for it). I am thinking this
is a new dependency that does not come bundled with Slackware 15.
Unfortunately not in the Slackbuilds 3rd party repo.
gcc -DLINBPQ -MMD -g -rdynamic -fcommon -fasynchronous-unwind-tables
-c -o RHP.o RHP.c
gcc pngwtran.o pngrtran.o pngset.o pngrio.o pngwio.o pngtrans.o
pngrutil.o pngwutil.o pngread.o pngwrite.o png.o pngerror.o pngget.o
pngmem.o APRSIconData.o AISCommon.o upnp.o APRSStdPages.o HSMODEM.o
WinRPR.o KISSHF.o TNCEmulators.o bpqhdlc.o SerialPort.o adif.o
WebMail.o utf8Routines.o VARA.o LzFind.o Alloc.o LzmaDec.o LzmaEnc.o
LzmaLib.o Multicast.o ARDOP.o IPCode.o FLDigi.o linether.o CMSAuth.o
APRSCode.o BPQtoAGW.o KAMPactor.o AEAPactor.o HALDriver.o MULTIPSK.o
BBSHTMLConfig.o ChatHTMLConfig.o BBSUtilities.o bpqaxip.o BPQINP3.o
BPQNRR.o cMain.o Cmd.o CommonCode.o HTMLCommonCode.o compatbits.o
config.o datadefs.o FBBRoutines.o HFCommon.o Housekeeping.o HTTPcode.o
kiss.o L2Code.o L3Code.o L4Code.o lzhuf32.o MailCommands.o
MailDataDefs.o LinBPQ.o MailRouting.o MailTCP.o MBLRoutines.o md5.o
Moncode.o NNTPRoutines.o RigControl.o TelnetV6.o WINMOR.o TNCCode.o
UZ7HODrv.o WPRoutines.o SCSTrackeMulti.o SCSPactor.o SCSTracker.o
HanksRT.o UIRoutines.o AGWAPI.o AGWMoncode.o DRATS.o FreeDATA.o
base64.o Events.o nodeapi.o mailapi.o mqtt.o RHP.o -Xlinker
-Map=output.map -l:libminiupnpc.so -lrt -lm -lz -l:libpaho-mqtt3a.a
-l:libjansson.a -lpthread -lconfig -lpcap -o linbpq
/usr/bin/ld: cannot find -l:libpaho-mqtt3a.a
/usr/bin/ld: cannot find -l:libjansson.a
collect2: error: ld returned 1 exit status
make: *** [makefile:35: linbpq] Error 1
Please advise :D
--
Thanks,
Chris Maness
|
Georges WH6AZ
Don
Jason Rausch