Re: Helping k9ctb with his windows version BPQ
On Mon, Sep 2, 2024 at 09:19 AM, Jerry Kutche wrote:
When I go to his mail windows and do a forward all the callsigns flash on the mail screen then disappear. AXIP works fine..
I think you are more experienced than me so likely have already checked, but what does the BBS Log show.? Any errors will show there.
?
Yeah, I said K9CTD earlier, I meant K9CTB....
?
?
|
Re: Helping k9ctb with his windows version BPQ
On Mon, Sep 2, 2024 at 09:19 AM, Jerry Kutche wrote:
Also attempted to update his .40 version to .42 copied the files like I did when I went from .1 to .40?
BPQMail.exe updated too?
?
?
|
Re: Helping k9ctb with his windows version BPQ
Jerry,
?
K9CTD showed up in my MHeard list almost a week ago.? I installed a MAP line and it connected and has been stable ever since.? Even put in forwarding rules and he has been accepting messages since.
?
Not sure that is any help to you but you are welome to forward me anything to test or whatever you need.? If I can be of assistance let me know.
?
?
Mark, N5MDT
?
|
Helping k9ctb with his windows version BPQ
Real close to getting a few errors fixed.
?
I can connect to him and transfer files over VARA just fine.?
When I go to his mail windows and do a forward all the callsigns flash on the mail screen then disappear. AXIP works fine..
?
Not sure what I am doing wrong. A manual connect works fine.?
?
Also attempted to update his .40 version to .42 copied the files like I did when I went from .1 to .40?
?
Other then that everything seems ok.... Worked before when I went from .1 to .40 for quite a while?
?
thanks
73 Jerry N9LYA
|
Re: QtTermTCP Custom Colors
Oh this is really cool - thanks for highlighting it, I'll have to go and find the setting!
--? ? Hibby ? Debian Developer ? Packet Radioist ? MM0RFN
On Sun, 1 Sep 2024, at 5:24 PM, Lee Bengston wrote:
On the lighter side, thanks John for the configurable colors in QtTermTCP.? I've had the current colors for quite a while - must have found a window of time where I didn't have anything better to do.? :-)
BTW, in the example below the bottom window doesn't match the top because I scrolled up to show earlier history at the bottom. That was just to find a better display of the mix of green and white text.
73,
Lee K5DAT
|
Can LinBPQ connect to a custom application silently? When I use the , LinBPQ transmits "*** Connected to APPL\r" to the AX.25 client, before anything the application transmits. The client sees:
?
cmd:c w6jmk-1
cmd:*** CONNECTED to W6JMK-1
*** Connected to APPL
Hello, KM6LQZ. Enter B to disconnect.
?
How can I prevent transmitting that "Connected to APPL" message? It doesn't come from the application.
?
I'm running linbpq 32-bit version 6.0.24.42, on Ubuntu 64-bit version 20.04.6 LTS on x86 hardware. My bpq32.cfg file is attached.
|
Re: BPQ32/LinBPQ vulnerability.
On 2024-08-27 09:23, John G8BPQ via groups.io wrote: Someone has published an exploit for two buffer overflow vulnerability in BPQ32/LinBPQ.
The most serious one was fixed in 6.0.24.36 but many people may still be running older versions.
I suggest you update the the latest versions of bpq32 and linbpq (6.0.24.42) from my beta download area. If you are running on Windows I suggest you update BPQMail.exe and BPQChat.exe as well as bpq32.dll as there may be incompatibly with older versions.
The latest source in in my git repositories.
I will issue a new installer for Windows a soon a possible but that may take a few days.
73, John
-- 73 de Jean, VA2OM / VE2PKT Sysop de: VE2PKT (BBS), VE2PKT-2 (BPQNode), VE2PKT-4 (XRPI) : VE2PKT-5 (Jnos), VE2PKT-9 (DXCluster) RF: 145.05 Mhz (1.2K Bps) Packet, 147.435 Mhz, VARA Internet: Telnet: ve2pkt.dyndns.org port 2323 (Xrpi Node) - VE2PKT-4 Telnet: ve2pkt.ampr.org port 9000 (DXCluster) - VE2PKT-9 E-Mail: packet: va2om@ve2pkt.#qbc.qc.can.noam ampr net: va2om@... Inet: ve2pkt@... Hamshack Hotline: 5500000866 Membre Createur du groupe [email protected]/g/PacketQuebecCarte des Station RF au Quebec
|
Re: AGWPE emulator with multiple radios
As a different test case, I tried separate TNCs. I mean, for each radio there's a separate process running Direwolf. These processes communicate with LinBPQ via separate TCP/IP ports. With this configuration, I see the same problem. That is, the server disconnects via one radio when it should disconnect via the other.
?
I'm running linbpq 32-bit version 6.0.24.42, on Ubuntu 64-bit version 20.04.6 LTS on x86 hardware.
|
AGWPE emulator with multiple radios
Can you help me use LinBPQ's AGWPE emulator to communicate via multiple radios? I'm having trouble: connections from different KISS ports go to the same AGW port. I mean the same port number within AGW frames (not the TCP/IP port number).
?
As a test case, I configured LinBPQ to access two ports of one KISS TNC via TCP/IP. These two KISS ports represent two radios operating on different frequencies. I ran a server that connects to LinBPQ's AGWPORT and listens for connections on both KISS channels. I connected via AX.25 to one radio, and the server received the connection as it should.
?
But when I connected via AX.25 to the other radio, things went wrong. The SABM came from a different KISS TNC port (as it should), but the AGWPE client received a connection with the same AGW port as the first connection. Then I sent some data via AX.25 that should cause the server to disconnect the second connection, but it caused the server to disconnect the first connection. (I'm not very surprised, since from the server's point of view there's only one connection.)
?
It seems like packets from different KISS ports are routed to the same AGW port 0.
?
Should I configure LinBPQ differently? My current bpq32.cfg file is attached.
?
The KISS TNC is Direwolf. I've attached a log of all the KISS frames (from Direwolf), a log of all the AGW frames (from my server) and the Direwolf configuration file.
|
Re: BPQ32 Connect Script Problems
That is the VARA log, not the BBS log.
73, John
On 01/09/2024 16:57, Robby via
groups.io wrote:
toggle quoted message
Show quoted text
?
What does the BBS log show?
73, John
On 01/09/2024 15:59, Robby via
groups.io wrote:
Okay Lee
I just tried that and it didn¡¯t work I don¡¯t know why
it will not switch to the other frequency?
On Sep 1, 2024, at 9:51?AM, Lee
Bengston via groups.io <kilo5dat@...>
wrote:
?
Hello Robby,
Try adding "USB" in the second radio statement
- RADIO 7.100
USB assuming you are staying on USB.
73,
Lee K5DAT
On Sat, Aug 31,
2024 at 6:34?AM N3MEL - Glenn via
<n3mel.epa= [email protected]>
wrote:
On Sat, Aug 31, 2024 at 02:47 AM, Robby
wrote:
Times 0000-2359
Attach 5
RADIO 7.0945 USB
C AD5EO
ELSE
RADIO 7.100
C AD5EO
?
You need to add ATT 5 after the ELSE
statement as well!
?
Glenn/N3MEL
?
|
Re: Moving to new server?
A little more than minimal required, but it should work fine.
?
I would also install the latest bpq32.dll, BPQMail.exe and BPQChat.exe also.
?
?
?
|
Hello all. I'm about to switch over my BPQ to a new server for BPQ (Windows to?Windows). I'm assuming that I simply install BPQ32, then copy over?C:\Users\brian\AppData\Roaming\BPQ32 from the old server.
Anything else that I need to do or be?aware of?
Best, Brian, KA3VSP
|
On the lighter side, thanks John for the configurable colors in QtTermTCP.? I've had the current colors for quite a while - must have found a window of time where I didn't have anything better to do.? :-)
BTW, in the example below the bottom window doesn't match the top because I scrolled up to show earlier history at the bottom. That was just to find a better display of the mix of green and white text.
73, Lee K5DAT
|
Re: BPQ32 Connect Script Problems
 On Sep 1, 2024, at 10:45?AM, John G8BPQ via groups.io <john.wiseman@...> wrote:
?
What does the BBS log show?
73, John
On 01/09/2024 15:59, Robby via
groups.io wrote:
Okay Lee
I just tried that and it didn¡¯t work I don¡¯t know why it will
not switch to the other frequency?
On Sep 1, 2024, at 9:51?AM, Lee
Bengston via groups.io <kilo5dat@...>
wrote:
?
Hello Robby,
Try adding "USB" in the second radio statement -
RADIO 7.100 USB assuming
you are staying on USB.
73,
Lee K5DAT
On Sat, Aug 31, 2024
at 6:34?AM N3MEL - Glenn via
<n3mel.epa= [email protected]>
wrote:
On Sat, Aug 31, 2024 at 02:47 AM, Robby wrote:
Times 0000-2359
Attach 5
RADIO 7.0945 USB
C AD5EO
ELSE
RADIO 7.100
C AD5EO
?
You need to add ATT 5 after the ELSE
statement as well!
?
Glenn/N3MEL
?
|
Re: BPQ32 Connect Script Problems
What does the BBS log show?
73, John
On 01/09/2024 15:59, Robby via
groups.io wrote:
toggle quoted message
Show quoted text
Okay Lee
I just tried that and it didn¡¯t work I don¡¯t know why it will
not switch to the other frequency?
On Sep 1, 2024, at 9:51?AM, Lee
Bengston via groups.io <kilo5dat@...>
wrote:
?
Hello Robby,
Try adding "USB" in the second radio statement -
RADIO 7.100 USB assuming
you are staying on USB.
73,
Lee K5DAT
On Sat, Aug 31, 2024
at 6:34?AM N3MEL - Glenn via
<n3mel.epa= [email protected]>
wrote:
On Sat, Aug 31, 2024 at 02:47 AM, Robby wrote:
Times 0000-2359
Attach 5
RADIO 7.0945 USB
C AD5EO
ELSE
RADIO 7.100
C AD5EO
?
You need to add ATT 5 after the ELSE
statement as well!
?
Glenn/N3MEL
?
|
Re: BPQ32 Connect Script Problems
Okay Lee I just tried that and it didn¡¯t work I don¡¯t know why it will not switch to the other frequency?
toggle quoted message
Show quoted text
On Sep 1, 2024, at 9:51?AM, Lee Bengston via groups.io <kilo5dat@...> wrote:
? Hello Robby,
Try adding "USB" in the second radio statement -
RADIO 7.100 USB assuming you are staying on USB.
73, Lee K5DAT
On Sat, Aug 31, 2024 at 6:34?AM N3MEL - Glenn via <n3mel.epa= [email protected]> wrote: On Sat, Aug 31, 2024 at 02:47 AM, Robby wrote:
Times 0000-2359
Attach 5
RADIO 7.0945 USB
C AD5EO
ELSE
RADIO 7.100
C AD5EO
?
You need to add ATT 5 after the ELSE statement as well!
?
Glenn/N3MEL
?
|
Re: BPQ32 Connect Script Problems
Hello Robby,
Try adding "USB" in the second radio statement -
RADIO 7.100 USB assuming you are staying on USB.
73, Lee K5DAT
On Sat, Aug 31, 2024 at 6:34?AM N3MEL - Glenn via <n3mel.epa= [email protected]> wrote: On Sat, Aug 31, 2024 at 02:47 AM, Robby wrote:
Times 0000-2359
Attach 5
RADIO 7.0945 USB
C AD5EO
ELSE
RADIO 7.100
C AD5EO
?
You need to add ATT 5 after the ELSE statement as well!
?
Glenn/N3MEL
?
|
Re: BPQ32 Connect Script Problems
i add the att 5 after that and it still will not switch to the other frequency any more suggestions will be welcome
|
Re: UPDATING BPQ 32 from 6.0.23.1 to BETA
On Sat, Aug 31, 2024 at 10:14 PM, Gary - K7EK wrote:
It seems so random. There's no logic to it.
I agree.? I have verified, mutiple times that his UDP port is open so I do not believe that to be the problem. I have seen, when he does connect, that only one node appears, K7OI-5 without an alias.? In the Routes his connection shows with a Remote Quality of 0.? But looking at the BBS logs on connection his response is:
?
OINODE:K7OI-5} Connected to BBS
?? ?? [BPQ-6.0.24.31-B2FWIHJM$]
?
So, he does have a node alias, it's just not sending his node information.? That's the reason I thought about the Quality, UDP, and Broadcast Nodes statements.
?
?
Mark
?
|
Re: UPDATING BPQ 32 from 6.0.23.1 to BETA
Setup a tcp packet capture to listen on inbound axudp traffic port. Narrow it down to the remote side IP and see if anything is even coming in.
Often with non BPQ systems, or some ISP routers, the source port is not as expected.
73 Steve?
He has working AXIP links and BBS forwarding with many others so I don't believe he is misconfigured. It's that selected? stations cannot establish a working two way link with him. I kept saying that (no-ip) was causing it. But who knows?
I myself have other AXIP/BBS partners using without issues.? It seems so random. There's no logic to it.
Best regards,
Gary, K7EK
Get
On Aug 31, 2024, at 22:33, Lee Bengston < kilo5dat@...> wrote:
Yes, he could be missing any of those 3 in the AXIP port configuration - corrected UPD to UDP.
QUALITY=203
BROADCAST NODES
UDP 10093
Also port forwarding of UDP 10093 in his home router could be either misconfigured or not configured.
73,
Lee K5DAT
On Sat, Aug 31, 2024 at 02:36 PM, Gary - K7EK wrote:
Same.? It is almost like he is missing a part of his AXIP Port Configuration.? Possibles are....
?
QUALITY=203
BROADCAST NODES
UPD 10093
|
John Kristian W6JMK
Brian Pasternak
Robby