开云体育

Great link, thank you!

See https://www.cantab.net/users/john.wiseman/Documents/LinBPQ_RMSGateway.html This will install a very basic linbpq system which will work as a Winlink Gateway. 73, John

Our area is sparse for vhf / uhf winlink nodes. Id like to add one to the area but we dont have the power nor hardware on our possible site to support a bloated windows server install. *Bpq32* on

Acually, it looks like you are trying to access your node as if you are a gateway, and since you are not it will indeed fail. It's easier to do what you want without being a gateway, I believe.? (If

John, I have to apologize as it is the CMS server of Winlink what is doing the dropping of in-line attachments and not the BBS. I logged into the CMS server from packet to read my test messages

I have not registered to be a Winlink gateway as I thought this was just for my purposes. Maybe this is the issue ? RF port can be used to access your BBS....yes Winlink client has my call sign

The subject suggested the problem was with messages from winlink. Are these normal email messages? Is so could you forward one to my email so I can see how it is structured and also the message file

Hi John, I don't know or this is possible with WinLink Express, I have it but don't using it often as I normally use Linux with Thunderbird. 73, Boudewijn VE3TOK use Thunderbird -- There is

It sounds like you have already applied for and were approved to be a Winlink Gateway, is that the case? Have you followed the documentation about this to create a user called RMS and set the

Yes Mark, I just want to rf into my own bp32 node (at home,) in the local area from my mobile setup using Winlink Express packet just for my personal use. The node works now with my mobile setup using

I can't see how to add an inline image to a winlink message. How are you doing it? Thanks, John

Hi, Mark: Thanks. Now: pi@nc8q-bpq:~/linbpq $ head? bpq32.cfg EnableM0LTEMap=1;? goes in the global section, above all ports. ;

On 4/21/25 11:10, Simon G4WQG via groups.io wrote: I added my offset so folks can determine my center frequency. NC8Q-7 LINBPQ 6.0.24.69 * AX.25 port 6 (7.1015MHz 300bd AFSK) - +800Hz QtSM_A

Source record not recognised - Ignored:EnableM0LTEMap=0 The PORT param is SendtoM0LTEMap=0 It goes in the main section of the PORT config, before CONFIG EnableM0LTEMap is a global command and has

Great! Thanks Chris. Em qua., 23 de abr. de 2025, 10:21, Chris Lance WW2BSA via groups.io <Ww2bsa@...> escreveu:

Hello Mauro, Although most have already suggested many maps, here is one more resource that you might find enjoyable: Nationwide Amateur Radio Packet Directory Map

Correction.... EnableM0LTEMap=1? goes in the global section, above all ports. SendToM0LTEMap=0? goes in a port, above the CONFIG section to prevent just that port from being reported. To not

Put it above the CONFIG section of the port. -- 73, Mark, N5MDT Montgomery, Texas http://n5mdt.ham-radio-op.net:52852

pi@nc8q-bpq:~/linbpq $ ./linbpq G8BPQ AX25 Packet Switch System Version 6.0.24.69 March 2025 Copyright ? 2001-2025 John Wiseman G8BPQ Current Directory is /home/pi/linbpq Log Directory is

Yes, it is done all the time. Are you wanting to access you own node or someone else'? Are you wanting others to access your node to access mail from CMS or just you? -- 73, Mark, N5MDT Montgomery,