¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Bpq32
  2. Messages
Expanded Topics Messages
Date
Re: DIGIFLAG=1 with UH7ZO

 

I do not use soundmodem but if I remember correctly, if you use the UZ7HO driver then the L2 processing happens in the soundmodem configuration.? If you use the BPQ2AGW driver then L2 processing happens in BPQ and is controlled in the bpq32.cfg file.
?
Someone may surely correct me with finer details...
?
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?
DIGIFLAG=1 with UH7ZO

 

Hi,
?
Does the DIGIFLAG for digipeating work with UZ7HO soundmodem?
?
My system is not digipeating here.? ?Any advice appreciated.
?
Cheers.
Re: Help with CTEXT Format and ASCII Codes

 

I provided the original file to John, and he informed me that the CTText I used was too long.
CTText is limited to 510 characters, but mine was 533 characters.
Thank you, John and everyone.
73,
Tom
Classifieds app

 

Here is an python tcp script that could be used to list goods and services needed or available.?
?
Re: Reporting HF capable node on the BPQ map

 

¿ªÔÆÌåÓý

Yes i noticed that when i used the link you provided.

Thanks
Bob

On Jan 12, 2025, at 3:05?AM, John G8BPQ via groups.io <john.wiseman@...> wrote:

? Sorry, that's the same map. nodemap.g8bpq.net is an alias for guardian.no-ip.org

73, John


On 11/01/2025 22:09, Bob-va3rjs via groups.io wrote:
No i am looking on?

Ok that is good information, pretty steep learning curve beyond basic node activation.

Thanks again John

Bob



On Jan 11, 2025, at 3:58?PM, John G8BPQ via groups.io <john.wiseman@...> wrote:

? Are you talking about the maps at and vps1.g8bpq.net? If so, you don't configure anything. Your call will be red and will appear on the Heard map if you hear packets on a UZ7HO, ARDOP, VARA, PACTOR, SCS Tracker or WinRPR port. The code considers these to be HF ports, regardless of the actual frequency. KISS ports are assumed to be VHF ports.

?73, John


On 11/01/2025 01:38, Bob-va3rjs via groups.io wrote:
Hi?
?
my settings in the config file report my node to the bpq map just fine, but i am wondering what i need to do to the config to get it to report that it has an hf port too?
--
Bob
va3rjs


--
Bob
va3rjs


--
Bob
va3rjs
Re: Reporting HF capable node on the BPQ map

 

¿ªÔÆÌåÓý

Sorry, that's the same map. nodemap.g8bpq.net is an alias for guardian.no-ip.org

73, John


On 11/01/2025 22:09, Bob-va3rjs via groups.io wrote:

No i am looking on?

Ok that is good information, pretty steep learning curve beyond basic node activation.

Thanks again John

Bob



On Jan 11, 2025, at 3:58?PM, John G8BPQ via groups.io <john.wiseman@...> wrote:

? Are you talking about the maps at and vps1.g8bpq.net? If so, you don't configure anything. Your call will be red and will appear on the Heard map if you hear packets on a UZ7HO, ARDOP, VARA, PACTOR, SCS Tracker or WinRPR port. The code considers these to be HF ports, regardless of the actual frequency. KISS ports are assumed to be VHF ports.

?73, John


On 11/01/2025 01:38, Bob-va3rjs via groups.io wrote:
Hi?
?
my settings in the config file report my node to the bpq map just fine, but i am wondering what i need to do to the config to get it to report that it has an hf port too?
--
Bob
va3rjs


--
Bob
va3rjs
Re: Reporting HF capable node on the BPQ map

 

¿ªÔÆÌåÓý

No i am looking on?

Ok that is good information, pretty steep learning curve beyond basic node activation.

Thanks again John

Bob



On Jan 11, 2025, at 3:58?PM, John G8BPQ via groups.io <john.wiseman@...> wrote:

? Are you talking about the maps at and vps1.g8bpq.net? If so, you don't configure anything. Your call will be red and will appear on the Heard map if you hear packets on a UZ7HO, ARDOP, VARA, PACTOR, SCS Tracker or WinRPR port. The code considers these to be HF ports, regardless of the actual frequency. KISS ports are assumed to be VHF ports.

?73, John


On 11/01/2025 01:38, Bob-va3rjs via groups.io wrote:
Hi?
?
my settings in the config file report my node to the bpq map just fine, but i am wondering what i need to do to the config to get it to report that it has an hf port too?
--
Bob
va3rjs


--
Bob
va3rjs
Re: Reporting HF capable node on the BPQ map

 

¿ªÔÆÌåÓý

Are you talking about the maps at and vps1.g8bpq.net? If so, you don't configure anything. Your call will be red and will appear on the Heard map if you hear packets on a UZ7HO, ARDOP, VARA, PACTOR, SCS Tracker or WinRPR port. The code considers these to be HF ports, regardless of the actual frequency. KISS ports are assumed to be VHF ports.

?73, John


On 11/01/2025 01:38, Bob-va3rjs via groups.io wrote:

Hi?
?
my settings in the config file report my node to the bpq map just fine, but i am wondering what i need to do to the config to get it to report that it has an hf port too?
--
Bob
va3rjs
Re: Reporting HF capable node on the BPQ map

 

I tried adding info to the MAPCOMMENT parameter and adding the UPDATEMAP parameter, with no change to the map listing¡­.. would help to know what the map keys on to make the decision if the node is HF capable¡­¡­
B

On Jan 11, 2025, at 9:29?AM, N9SEO via groups.io <kayne.kruse@...> wrote:

group.
--
Bob
va3rjs
Re: Help with CTEXT Format and ASCII Codes

 

¿ªÔÆÌåÓý

I need the actual file, not a listing of it.

Thanks,
John



On 11/01/2025 15:21, DO1ATM wrote:

shure, here it is, only ASCII.
Host is a Linux Mint, aktual patchlevel.
?
?
?
?

SIMPLE
LOCATOR=JN59NG
NODECALL=DO1ATM-10
NODEALIAS=RHBBS
CTEXT:
Willkommen in der RHBBS von DO1ATM (ein Linpbq Node)
____ _ _ ____ ____ ____ _
| _ \| | | | __ )| __ ) ___| | |__ _ _
| |_) | |_| | _ \| _ \___ \ | '_ \| | | |
| _ <| _ | |_) | |_) |__) | | |_) | |_| |
|_|_\_\_|_|_|____/|____/____/ |_.__/ \__, |
| _ \ / _ \/ | / \|_ _| \/ | |___/
| | | | | | | | / _ \ | | | |\/| |
| |_| | |_| | |/ ___ \| | | | | |
|____/ \___/|_/_/ \_\_| |_| |_|
HMNDE> BBS CHAT CONNECT BYE INFO NODES ROUTES PORTS USERS MHEARD
\033[32m(Tipp: Wenn man nicht mehr weiterkommt, '?' zeigt die M?glichkleiten)\033[0m
***
FULL_CTEXT=0
IDMSG:
LinBPQ Node RH/SC DO1ATM-10 BBS DO1ATM-11 CHAT?
***
BTEXT:
DO1ATM-11 LinBPQ BBS/CHAT/ZORK @144.925MHz
***
INFOMSG:
Sysop TOM Do1ATM.
MoreInfo:
BBS to connect to the BBS.
CHAT to connect to CHAT server.
ZORK to connect to Multiplayer Game.
***
MAPCOMMENT=RH/SC LinBPQ Node, Roth <br>DO1ATM-10:144.930MHz<br>
IDINTERVAL=15
BTINTERVAL=15
NODESINTERVAL=25
PACLEN=236
AUTOSAVE=1
BBS=1
NODE=1
HIDENODES=0
PORT
? ?PORTNUM=1
? ?ID=AX25 144.930 @ 1200 bps
? ?TYPE=ASYNC
? ?SPEED=19200
? ?PROTOCOL=KISS
? ?IPADDR=127.0.0.1
? ?TCPPORT=8001
? ?RESPTIME=1500
? ?CHANNEL=A
? ?MHEARD=Y
? ?BCALL=DO1ATM-7
? ?KISSOPTIONS=NOPARAMS
? ?MINQUAL=100
? ?FULLDUP=0
? ?PERSIST=12
? ?DIGIFLAG=1
? ?NOKEEPALIVES=1
ENDPORT

PORT
? ?PORTNUM=2
? ?ID=Telnet
? ?DRIVER=Telnet
? ?QUALITY=0
? ?CONFIG
? ?LOGGING=1
? ?DisconnectOnClose=0
? ?SECURETELNET=1
? ?LOGGING=1
? ?TCPPORT=8100
? ?FBBPORT=8101
? ?CMDPORT 63001 63002 ?
? ?IPV4=1
? ?HTTPPORT=8085
? ?LOGINPROMPT=Username:
? ?PASSWORDPROMPT=Password:
? ?MAXSESSIONS=15
? ?CloseOnDisconnect=1
? ?CTEXT=Wilkommen im RH/SC LinBPQ Telnet Server\nEnter ? for list of commands\n\n
? ?
ENDPORT

APRSDIGI
? ? APRSCALL=DO1ATM-10
? ? APRSPATH 1=APRS,WIDE1-1,WIDE2-1
? ? STATUSMSG=LinBPQ BBS Node RH/SC auf 144.925MHz
? ? Symbol=&
? ? Symset=\
? ? LAT=4916.31N
? ? LON=01105.43E
? ? APRSPATH 1=APRS,WIDE1-1,WIDE2-1
? ? BeaconInterval=30
? ? TraceCalls=WIDE,TRACE
? ? MaxTraceHops=2
? ? MaxFloodHops=2
? ? ISHost=euro.aprs2.net
? ? ISPort=14580
? ? ISPasscode=xxxxx
***
APPLICATION 1,BBS,,DO1ATM-11,RHBBS,255
APPLICATION 2,CHAT,,DO1ATM-12,RHCHT,255
APPLICATION 3,WORDL,C 2 HOST 0 K S
APPLICATION 4,ZORK,C 2 HOST 1 K S
LINMAIL
LINCHAT
Re: Upgrade to the Latest DLL issues

 

Thanks guys. Back up and running normally.

-Chris KQ6UP

On Fri, Jan 10, 2025 at 7:11?PM Lee Bengston via groups.io
<kilo5dat@...> wrote:

On Fri, Jan 10, 2025 at 9:04?PM Christopher Maness via groups.io <christopher.maness@...> wrote:

Where do I find those executables?

Thanks,
Chris Maness
-Sent from my iPhone

_._



,_._,_


--
Thanks,
Chris Maness
Re: Help with CTEXT Format and ASCII Codes

 

shure, here it is, only ASCII.
Host is a Linux Mint, aktual patchlevel.
?
?
?
?

SIMPLE
LOCATOR=JN59NG
NODECALL=DO1ATM-10
NODEALIAS=RHBBS
CTEXT:
Willkommen in der RHBBS von DO1ATM (ein Linpbq Node)
____ _ _ ____ ____ ____ _
| _ \| | | | __ )| __ ) ___| | |__ _ _
| |_) | |_| | _ \| _ \___ \ | '_ \| | | |
| _ <| _ | |_) | |_) |__) | | |_) | |_| |
|_|_\_\_|_|_|____/|____/____/ |_.__/ \__, |
| _ \ / _ \/ | / \|_ _| \/ | |___/
| | | | | | | | / _ \ | | | |\/| |
| |_| | |_| | |/ ___ \| | | | | |
|____/ \___/|_/_/ \_\_| |_| |_|
HMNDE> BBS CHAT CONNECT BYE INFO NODES ROUTES PORTS USERS MHEARD
\033[32m(Tipp: Wenn man nicht mehr weiterkommt, '?' zeigt die M?glichkleiten)\033[0m
***
FULL_CTEXT=0
IDMSG:
LinBPQ Node RH/SC DO1ATM-10 BBS DO1ATM-11 CHAT?
***
BTEXT:
DO1ATM-11 LinBPQ BBS/CHAT/ZORK @144.925MHz
***
INFOMSG:
Sysop TOM Do1ATM.
MoreInfo:
BBS to connect to the BBS.
CHAT to connect to CHAT server.
ZORK to connect to Multiplayer Game.
***
MAPCOMMENT=RH/SC LinBPQ Node, Roth <br>DO1ATM-10:144.930MHz<br>
IDINTERVAL=15
BTINTERVAL=15
NODESINTERVAL=25
PACLEN=236
AUTOSAVE=1
BBS=1
NODE=1
HIDENODES=0
PORT
? ?PORTNUM=1
? ?ID=AX25 144.930 @ 1200 bps
? ?TYPE=ASYNC
? ?SPEED=19200
? ?PROTOCOL=KISS
? ?IPADDR=127.0.0.1
? ?TCPPORT=8001
? ?RESPTIME=1500
? ?CHANNEL=A
? ?MHEARD=Y
? ?BCALL=DO1ATM-7
? ?KISSOPTIONS=NOPARAMS
? ?MINQUAL=100
? ?FULLDUP=0
? ?PERSIST=12
? ?DIGIFLAG=1
? ?NOKEEPALIVES=1
ENDPORT

PORT
? ?PORTNUM=2
? ?ID=Telnet
? ?DRIVER=Telnet
? ?QUALITY=0
? ?CONFIG
? ?LOGGING=1
? ?DisconnectOnClose=0
? ?SECURETELNET=1
? ?LOGGING=1
? ?TCPPORT=8100
? ?FBBPORT=8101
? ?CMDPORT 63001 63002 ?
? ?IPV4=1
? ?HTTPPORT=8085
? ?LOGINPROMPT=Username:
? ?PASSWORDPROMPT=Password:
? ?MAXSESSIONS=15
? ?CloseOnDisconnect=1
? ?CTEXT=Wilkommen im RH/SC LinBPQ Telnet Server\nEnter ? for list of commands\n\n
? ?
ENDPORT

APRSDIGI
? ? APRSCALL=DO1ATM-10
? ? APRSPATH 1=APRS,WIDE1-1,WIDE2-1
? ? STATUSMSG=LinBPQ BBS Node RH/SC auf 144.925MHz
? ? Symbol=&
? ? Symset=\
? ? LAT=4916.31N
? ? LON=01105.43E
? ? APRSPATH 1=APRS,WIDE1-1,WIDE2-1
? ? BeaconInterval=30
? ? TraceCalls=WIDE,TRACE
? ? MaxTraceHops=2
? ? MaxFloodHops=2
? ? ISHost=euro.aprs2.net
? ? ISPort=14580
? ? ISPasscode=xxxxx
***
APPLICATION 1,BBS,,DO1ATM-11,RHBBS,255
APPLICATION 2,CHAT,,DO1ATM-12,RHCHT,255
APPLICATION 3,WORDL,C 2 HOST 0 K S
APPLICATION 4,ZORK,C 2 HOST 1 K S
LINMAIL
LINCHAT
Re: Reporting HF capable node on the BPQ map

 

Ok NO KISSHF does not report, which explains why my WinRPR is not showing.
Re: Reporting HF capable node on the BPQ map

 

On Sat, Jan 11, 2025 at 08:07 AM, Bob-va3rjs wrote:

I don¡¯t see Frequency and Updatemap in the documentation but i am pretty new to bpq so i may not be looking in the right place¡­.

Aye, It is not explicitly put in the various modem drivers. I have found it by some trial and error. But it IS listed in the uz7ho driver:

It works on some others I think like WinRPR, ARDOP, and KISSHF (undocumented). If you look at n9seo-3 on the map, you will see mine. Tho I guess RPR is not reporting now. It was when I looked some months ago.

73
Re: Reporting HF capable node on the BPQ map

 

I don¡¯t see Frequency and Updatemap in the documentation but i am pretty new to bpq so i may not be looking in the right place¡­.

I will put an ¡°UPDATEMAP¡± in my config and see what happens.

Thanks
Bob

On Jan 11, 2025, at 8:08?AM, Chuck Gelm <nc8q-aredn@...> wrote:

?On 1/10/25 22:04, Mark Taylor wrote:
Probably all it will require is a FREQUENCY line. Most likely you have anything else you need already.
--
73,
Mark, N5MDT
Mark et alia:

Used after
PORT
...
CONFIG
?
I have ";FREQUENCY..." 3 times in my bpq32.cfg file.
Obviously I have had issue this NAME|VALUE pair.
Is this an information line or does it attempt to control a radio?
I assume that the center frequency would be used.
Where may I find more information?

"FREQUENCY" does not exist in

:-|

73, Chuck





--
Bob
va3rjs
Re: Reporting HF capable node on the BPQ map

 

On 1/10/25 22:04, Mark Taylor wrote:
Probably all it will require is a FREQUENCY line.? Most likely you have anything else you need already.
--
73,
Mark, N5MDT
Mark et alia:

Used after
PORT
...
?CONFIG
?
I have ";FREQUENCY..." 3 times in my bpq32.cfg file.
Obviously I have had issue this NAME|VALUE pair.
Is this an information line or does it attempt to control a radio?
I assume that the center frequency would be used.
Where may I find more information?

"FREQUENCY" does not exist in

:-|

73, Chuck
Re: Reporting HF capable node on the BPQ map

 

I think you need the UPDATEMAP in the port config. Tho it may not work for some ports types. I dont have a frequency line here, but have the RADIO section configured for rigcontrol.

PORT
 ID=UZ7HO KX3 NET105
 PORTNUM=6
 DRIVER=UZ7HO
 FRACK=7000
 RESPTIME=7000
 CHANNEL=A
 INTERLOCK=1
 RADIO=1
 PACLEN=80
 RETRIES=15
 CONFIG
  ADDR 192.168.1.2 8000 PTT CAT
  MAXSESSIONS=5
  UPDATEMAP
  BEACONAFTERSESSION
ENDPORT

RADIO 1
    FLRIG 192.168.1.2:12345 HAMLIB=4532
    7,7.1025,DATA,1500,R1,R2,VN
****

73
Re: Help with CTEXT Format and ASCII Codes

 

Could you send me your bpq32.cfg file so I can see exactly what character's you are using??

Thanks, John?

On 11 Jan 2025 10:47, DO1ATM <DO1ATM@...> wrote:
ok, but everything is done in 'terminal'.
The Config File is written in NANO, the BBS runs in a Terminal, the BBS Output is in Terminal, so everything should be the same I guess.
I must confess, I'm more a Windows guy and know about codepage problems by altering config Files in TXT Format by word ord wordpad instead of Editor.
But here?
And moust of all, what can i do about it?
?
73
DO1ATM
?
Re: Help with CTEXT Format and ASCII Codes

 

ok, but everything is done in 'terminal'.
The Config File is written in NANO, the BBS runs in a Terminal, the BBS Output is in Terminal, so everything should be the same I guess.
I must confess, I'm more a Windows guy and know about codepage problems by altering config Files in TXT Format by word ord wordpad instead of Editor.
But here?
And moust of all, what can i do about it?
?
73
DO1ATM
?
Re: Reporting HF capable node on the BPQ map

 

¿ªÔÆÌåÓý

Ok thanks, much appreciated

Bob

On Jan 10, 2025, at 10:04?PM, Mark Taylor <mtaylor@...> wrote:

?
Probably all it will require is a FREQUENCY line.? Most likely you have anything else you need already.
--
73,
Mark, N5MDT
Montgomery, Texas
?
?
?

--
Bob
va3rjs
981 - 1000 of 43750