开云体育

Hi All, I know the documentation states "two" ports, but any chance it can do multiple ie; 3 or 4 soundmodems? Thanks Rick VA7RBP

Also, try to connect to multiple stations unless your radio has lightning fast T/R turnaround. Some radios are fast and the default settings cause problems with slower radios. Sysops don't seem to

Thanks John, will give it another try with those changes. -- Brian K0FBS

What does Rem Quality actually mean?? I am trying to understand why that value can be higher than the set quality.... Should Rem Quality value be considered in locked routes? Thanks, Harmen VE3EMA

APRS-IS passcode is mathematically generated from the callsign - here's an example of the function:?https://github.com/magicbug/PHP-APRS-Passcode/blob/master/aprs_func.php

Brian, You can't have two RIGCONTROL definitions for the same radio. The INTERLOCK=1 tells the code to use the same definition for both ports. There is no need to connect the control port to the PTC -

I am having trouble with my configuration in BPQ for windows with my SCS PTC II modem I just acquired. This is the original PTC II. I have it connected to the ACC port on my Icom 7300, with the

BPQ startup commands for reference- ========== root@Pi-BPQ:/home/pi/linbpq# ./linbpq G8BPQ AX25 Packet Switch System Version 6.0.23.63 April 2023 Copyright ? 2001-2023 John Wiseman G8BPQ Current

Hello- Now I am trying to solve igate not connecting messages. Currently all I get is "APRS Igate connect failed" and after some long length of time (hours/days) I get a segmentation fault/BPQ crashes

Thanks for that John, was a good little rabbit hole to run down. I did also find an option to force it in ARDOPC.c (FSKOnly = FALSE), but that would be a bit of a hack. Digging through the source pat

Tnx John.Prof. Chris Lancewww.ww2bsa.org

PROTOCOL for an ASYNC port can only be KISS or NETROM. 73, John

ARDOPC has a command "FSKONLY 1" that should do what you want. With BPQ you can add that to the ARDOP port config but I don't think you can do that with the Winlink Clients. 73, John

I am curious if the PROTOCOL for BPQ32 can be anything other than KISS? In other words, if I wanted to attach a piece of hardware other than a TNC in KISS mode, what other data format (protocol)

Hi all, I've been having a bit of a dig around, and I'm wondering if this combination is possible, potentially with some changes to the source? Some background, I have a QRP-Labs QDX 3a (not yet

It's under the sysop commands section John. Probably from v4.08 days Steve

There's a consolidated 'cheat sheet' for node, sysop and bbs commands at https://cheatography.com/gcremerius/cheat-sheets/bpq-user-and-sysop-commands/ I've documented my attempt at a custom node

You may be thinking of the extended ROUTES command (R R) which I've just noticed isn't documented. 73, John

The Node command list is in Cmd.c, in variable COMMANDS[]. There may be the odd command in there that is still under test or intended for debugging, , but if you find anything useful that isn't in

Yes, I've used that list, but its the unofficial commands I'm interested in. I've done some digging in the code but haven't found where those commands are defined yet. One such command in particular