ARDOPC has a command "FSKONLY 1" that should do what you want. With
BPQ you can add that to the ARDOP port config but I don't think you
can do that with the Winlink Clients.
73,
John
On 08/05/2023 13:31, Marcus wrote:
toggle quoted message
Show quoted text
Hi all,
I've been having a bit of a dig around, and I'm wondering if this
combination is possible, potentially with some changes to the
source?
Some background, I have a QRP-Labs QDX 3a (not yet built), it's a
5W digital modes transceiver, but with a catch, it can only do a
single frequency at a time, without phase. The microprocessor
analyses the incoming audio, works out the frequency and generates
the RF from a clock source. So FSK possible, no PSK. It does work
with HF APRS. It's also extremely light and portable (~150g).
I briefly looked up the ARDOP specs and only superficially
understand them, and have looked at what I believe is the ardopc
the source.
Is it possible to tell ardopc to only use 4FSK modes? (I'm
thinking potentially strAllDataModes in ARDOPC.c.) Does doing this
make sense at all?
Is there a better way to do this?
If this can be made to work, it potentially adds a very small and
lightweight multiband HF transceiver to the list of radios that
can do Winlink.
Regards,
vk3tst/5wtf
